• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2057-2058
• /
• 2011

We have studied that a effect saving temperature of instantaneous heater using an economical bidet due to change Silicon-Tube. The results, we have found that the existing instantaneous heater is reduced 15 [%], 20 [%] better than a new product instantaneous heater as a discharge water [${\ell}$/min] with temperature and ${\nabla}$ value, respectively. Therefore, we have showed that the innovative effect of a working process and the cost reduction because an economical bidet due to change Silicon-Tube.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.395-398
• /
• 2009

최근 에너지 절감 방안이 크게 대두하면서 절전형 광원으로 평가받는 LED 조명에 대한 관심이 급증하고 있다. 특히 광원의 높은 효율성과 긴 수명, 소형 박형화로 조명기구의 슬림화를 실현할 수 있는 장점이 있어 방송제작 현장에서도 미래의 광원으로 기대되고 있다. 본 연구에서는 CIE의 기준에 따른 측광 방법으로 방송용 LED 조명의 기본적인 광원특성을 용도별, 조명 기구별로 측정하였다. 이를 바탕으로 기존 방송조명과의 분광분포 특성 및 연색성 등에 대한 비교 분석으로 LED 조명의 활용을 위한 기초자료를 확보하는 한편 그림자 투영 실험과 색 재현성 실험을 하였다. 이로써 LED의 새로운 광원에 의한 TV 조명이 방송영상에 미치는 영향과 그에 대한 개선점을 찾아보고자 한다.

• Electrical & Electronic Materials
• /
• v.8 no.3
• /
• pp.254-260
• /
• 1995

A method is described for the design and fabrication of the sensor interface circuits on the Clark electrodes for the dissolved oxygen(DO). The discussion includes a method for the +5 V single-supply driving for the sensor circuits, which has low power comsumption for the front-end electronics. DO probe under test is composed of the Clark electrode with silver anode, gold cathode and the electrolyte of half saturated KCI solution and the FEP teflon memtrance for the oxygen penetration. Typical polarograms for the DO probes by using this sensor circuit reveals high accuracy over 99% of the I to V conversion. Partial pressure of oxygen obtained from the polarograms are well suited to the results calculated. It is expected that the proposed sensor circuits can be utilized into the customized IC for the battery-driven small-size DO meters.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.157-159
• /
• 1993

Recently, in the industrial applications, accurate arc control for welding machine are developed. This paper describes arc control of inverter-fed arc welding machine, and efficiency of inverter-fed arc welding machine. It is shown that the arc pressure and are stiffness of the pulse arc nay be as much as several times that of the equivalent dc are. Finally, the theoretical predictions are compared with test. The potential of such a welding machine is also described.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.116-123
• /
• 2010

The Study of the Railway-saving electric water heaters to replace electric heaters when combined, Separate bathroom with hot water in winter, as coaches, without the need to warm up with hot water may be.To improve passenger service can tell. High-efficiency energy saving energy from furnace. Due to fuel cost savings and business improvements come true. Can prevent pollution.Heating the room next to railway vehicle utilization is expected to nopeulgeot.Is expected to expand gradually.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.324-326
• /
• 1997

Low power ZnO-Si gas sensor below 500 mW at operating temperature has been fabricated by using micromachining technique. I-V measurement shows the power consumption of 260 mW at $400^{\circ}C$ The sensitivity of the sensor was 45 percent at operating temperature of $350^{\circ}C$(230 mW) with 1,000 ppm CO gas atmosphere. The response and the recovery time found out to be 94 sec and 180 sec, respectively, when CO gas was used. In order to measure the exact temperature of the gas sensing layer, Pt/Cr bilayer-RTD was used in this experiment.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.146-149
• /
• 2002

컨덴서식 저항 용접기는 용접에 필요한 에너지를 전해컨덴서에 축척 시킨 후 이것을 순시에 용접변압기로 방전하여 큰 용접전류를 흘리게 된다. 아날로그 제어방식에 의한 기존 컨덴서 용접 시스템은 용접 세팅이 어려웠으며, 시스템의 소손 가능성이 높았고, 크기면에서도 비대해질 우려가 있었다. 이에 비해 디지털제어방식의 중앙집중식 자동화시스템은 사용자가 세팅을 쉽게 할 수 있으며, 전원을 제어함에 따라서 전력소비를 최소화 할 수 있다. 본 연구에서는 마이크로프로세서를 이용한 디지털제어방식의 중앙 집중식 컨덴서식 저항용접 시스템을 제안한다.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.511-513
• /
• 2009

본 논문은 절전형 센서에 사용되는 24GHz대역의 CW 레이더 송수신기의 설계에 관한 것이다. K 밴드 대역의 송수신기 회로의 기본 구조와 분배기가 디자인 되었고 발진기, 주파수혼합기, 고주파 증폭기는 기존 제품을 사용하였다. 제안된 송수신기의 크기는 $35{\times}35{\times}10(mm)$이며 여러 가지 제품에 사용될 수 있도록 설계되었다.

• Journal of Information Management
• /
• v.27 no.3
• /
• pp.1-24
• /
• 1996

The purpose of this study is to provide by locating various information sources in illuminating engineering and its related field. The proportion that illumination forms in the total electric power consumption takes up to 18%. For the development of new energy-saving lighting products, it Is indispensable to find out and use related technical information. The result of systematic survey of various information sources will be helpful for the researchers and librarians engaged in the field of illuminating engineering.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.75-82
• /
• 2009

It is possible that gain good effect for saving electric charges by power-saving education to organizer, instead of buying new energy saving computer in the company, school and public organization. But this kind of education needs time very much. And power management system for controling whole computer of organizer is released, but it is hard to set up. In this paper we prevent computers which do not have power shutdown software, from obtaining IP address by DHCP. So we induce organizer to setup power shutdown software.