• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.1
• /
• pp.83-86
• /
• 2005

This study is predicted tool deformation by cutting forces and chip-tool interface temperature in machining process. Modeling of tool is made using 3D CAD software, finite element method is performed by cutting forces and temperature. Cutting forces and temperature used load conditions are predicted using the cutting force model based on machining theory. Experimental milling tests have been conducted to verify the cutting force model. Finally, this study is predicted cutting force components and temperature using cutting conditions, material property, tool geometry without experiment and tool deformation is predicted by cutting forces and temperature in machining process.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.72-80
• /
• 1995

Ultraprecision machining technology has been playing a rapidly increasing and important role in manufacturing. However, the physics of the micromachining process at very small depth of cut, which is typically 1 .mu. m or less is not well understool. Shear along the shear plane and friction at the rake face dominate in conventional machining range. But sliding along the flank face of the tool due to the elastic recovery of the workpiece material and the effects of plowing due to the large effective negative rake angle resultant from the tool edge radius may become important in micromachining range. This paper suggests an orthogonal cutting model considering the cutting edge radius and then quantifies the effect of plowing due to the large effective negative rake angle.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.263-263
• /
• 2004

엔드밀 가공 공정은 항공산업과 자동차 부품 및 금형 가공 산업에서 널리 사용되고 있다. 정형가공 (near net shape) 기술의 발달에 따라 금형 가공시 허용공차 이내로 표면 오차를 유지하면서 가공시간을 감소시킬 필요성이 증대되었고 이에 따라, 절삭과정을 정확히 나타냄으로써 최종표면 형상을 정확히 예측할 수 있는 절삭모델을 통해 표면형성 예측 시뮬레이터의 개발 필요성이 있어왔다. 본 논문에서는 주어진 절삭조건에서 공구의 처짐과 런아웃을 고려한 절삭력 모델에 대하여 절삭력과 표면형성 데이터를 코딩된 포트란 프로그램에서 얻고 이것을 MFC와 연동시켜 예측 결과를 쉽게 확인할 수 있는 초보단계의 시뮬레이터 개발에 대하여 연구하였다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.81-85
• /
• 1993

정면밀링은 급속 가공을 매우 효율적으로수행할 수 있기 때문에 널리 사용되고 있다. 그러나 밀링커트는 단속 절삭 공구로서 절삭날의 단속절삭작용에 의한 변동적삭력과 여러날의 동시가공에의한 절삭력의 교란 때문에 절삭성이 기계가공에 문제가 되어 왔다. 이러한 문제점들을 해결하기 위하여 기계설계자들은 절삭 력의 교란에 의하여 일어나는 진동을 줄이기 위하여 기계구조의 강성을 증가시켰으나 이것은 비용이 많이 들게 되므로 공구 형상을 개선하여 안정된 절삭을 시도하였다. 본 연구에서는 절삭력 모델을 이용하여 변위 발생의 원인인 절삭력변동을 최소로 하는 커터의 형상을 3차원으로 최적 설계하였다. 최적 설계 제작된 공 구와 재래식 공구를 사용하여 절삭력, 공구수명, 표면조도를 측정하였다. 최적 설계 제작된 공구와 재래식 공구에 의하여 측정된 결과들을 비교 검토하여개발된 공구의 절삭특성을 규명하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.13-25
• /
• 1994

In order to design and improve a new machine tool, there is a need for a better understanding of the cutting force. In this paper, the computer programs were developed to predict not only the mean specific cutting pressure but also the cutting force. The simulated cutting forces in X, Y, Z directions resulted form the developed cutting force model were compared with the measured cutting forces in the time and frequency domains. The simulated cutting forces resulted from the new cutting force model have a good agreement with the measured force in comparison with these resulted from the existing cutting force model.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.468-484
• /
• 1992

본 연구에서는 기존의 유연 볼 엔드밀의 절삭력 모델을 바탕으로 자유 곡면의 정삭 가공에서 발생할 수 있는 과대 또는 과소 절삭을 방지하면서 그 가공의 효율성을 높이기 위한 볼 엔드밀의 이송 속도 결정법을 제시하고자 한다. 먼저, 자유 곡면의 가공에서 발생될 수 있는 공구의 처짐에 따른 가공오차에 대하여 볼 엔드밀 공구의 처 짐벡터와 공작물의 공구 접촉점에서의 법선벡터로 표현되는 가공오차(machining error ) 예측 모델식을 유도하였다. 본 가공오차 예측 모델식은 다시 절삭날당 가지는 이 송량의 함수로 전개되어 그 곡면의 주어진 가공 공차(machining tolerance)를 만족시 키는 이송속도를 결정하게 된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1269-1278
• /
• 2013

The cutting area changes periodically in the end-milling process because of its form generation mechanism. In this study, the effects of the cutting area on end-milled side walls are studied by developing a cutting area model that simulates the area formed by engagement between a workpiece and a cutting edge of the end mill. To do this, the straightness profile of the side wall in the axial direction is investigated. Models for estimating the cutting area and the transition point, where the slope of the straightness profile changes suddenly, are verified from real end-milling experiments under various radial and axial depth of cut conditions. Through this study, it is confirmed that the final end-milled side wall is generated in the regions where cutting areas are constant and decreasing in the down-cut. Similarly, in stable up-cut, it is also generated in the regions where cutting areas are increasing and constant. It is found that the transition point appears when the region changes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.166-171
• /
• 1993

절삭공구에의한 절삭가공은 오늘날 가장 보편화된 가공기술중의 하나이다. 그런데, 최근들어 각종 첨단산업의발전과 함께 초정밀 부품제작이 필수선결 조건으로 부상하고 있으며, 이에대한 해결방안중의 하나로 초정밀가공 기 술로 크게 대두되고 있다. 최근 컴퓨터 기술의 발달에 따라 구조해석분야의 해석방법론의 개발 및 보완에 힘입어 Klemecki(1973)에 의해유한요소법을 이용한 Chip생성기구 해석에 관한 연구가수행되었으며, Stevenson(1983) 등에의해단열조 건하에서 변형률과 온도 상태에서의 Chip형상, 잔류응결-변형율에 대한 연구가 이루어졌다. 본 연구에서는 유한요소법을 이용하여 미소절삭기구를 모델링하고, 절삭인자규명을 중심으로 응력-변형률 해석을 실시함으로써, 미소절삭시의 Chip 생성기구 및 전단면 생성 원리, 공구와 Chip간의 마찰기구의 고찰을 통해기본 Mechanism 이해와 적절한 절삭유한요소모델 제시의 기초자료로 삼고자 한다. 특히 본 보고서에서는 미소 절삭기구의 적정한 Constitutive Deformation Law 마찰계수 등 주요절삭인자변경에 따른 미소절삭기구 해석에 주안점을 두어 연구한 결과를 기술하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.2
• /
• pp.153-170
• /
• 2022

Waterjet has been comprehensively used in urban areas owing to a suitable technique for cutting concrete and rock, and low noise and vibration. Recently, the abrasive waterjet technique has been adopted and applied by the Korea Atomic Energy Research Institute to demolish concrete plugging without disturbing and damaging In-situ Demonstration of Engineered Barrier System in the disposal research tunnel. In this study, the use of abrasive waterjet in the tunnel was evaluated for practical applicability and the existing cutting model was compared with the experimental results. As a variable for waterjet cutting, multi-cutting, water flow rate, abrasive flow rate, and standoff distance were selected for the diversity of analysis. As regarding the practical application, the waterjet facilitated path selection for cutting the concrete plugging and prevented additional disturbances in the periphery. The pump's noise at idling was 64.9 dB which is satisfied with the noise regulatory standard, but it exceeded the standard at ejection to air and target concrete because the experiment was performed in the tunnel space. The experimental result showed that the error between the predicted and measured cutting volume was 12~13% for the first cut and 16% for second cut. The standoff distance had a significant influence on the cutting depth and width, and the error tended to decrease with decrement of standoff distance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.995-1000
• /
• 2000

In this paper. a mechanistic model is first constructed to predict three-dimensional cutting forces, and the uncut chip th thickness is calculated by following the movements of the position of the center of a cutter, which varies with the nominal feed, cutter deflection and runout. For general implementation to a real machining, this paper presents the method that determines constant cutting force coefficients, irrespective of the cutting conditions or cutter rotation angles. In addition, this study presents the approach which estimates runout-related parameters. the runout offset and its location angle, using only one measurement of cutting forces. For more accurate cutting force predictions, the size effect has to be considered in the cutting force model. In this paper, two approximate methods are suggested since the strict approach is practically impossible due to a measurement problem. The size effect is individually considered for narrow and wide cuts.