• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.52-57
• /
• 2000

STD11 is one of difficult-to-cut materials and its cutting characteristic data is not built enough. A bad cutting condition of it leads to low productivity of die and mould, so it is necessary to evaluate the machining characteristics of STD11. In this paper, the relations of the geometry of ball-end mill and mechanics of machining with it are studied. The helix angle of ball-end mill varies according to a location of elemental cutting edge in the cutting process are difficult to calculate accurately. To calculate instantaneous cutting forces, it is supposed that the tangential, radial and axial cutting force coefficients are functions of elemental cutting edge location. Elemental cutting forces in the x,y and z direction are calculated by coordinate transformation. The total cutting forces are calculated by integrating the elemental cutting forces of engaged cutting edge elements. This model is verified by slot and side cutting experiments of STD11 workpiece which was heat-treated to HRC45.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.38-46
• /
• 1999

Spindle motor current is used to estimate the cutting force indirectly and control the feed rate for the cutting force regulation. The proposed algorithm is implemented to a DSP board based hardware for the industrial application. The software to make POP terminal communicate with the DSP board and POP server is coded under Windows 95 environment. Experiments under varying cutting conditions show that the DSP board recognizes the information of installed cutting tool and cutting conditions delivered from the POP server to use them for the proper control of the feed rate. The cutting force is regulated well during machining of tapered or stepped workpiece and circular shaped workpiece as well.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.85-94
• /
• 1994

The cutting mechanism of ultrasonic vibration machining is characterized as two phases, that is, an impact at the cutting edge and a reduction of cutting force due to non-contact interval between tool and workpiece. In this paper, in order to identify cutting dynamics of a system with ultrasonically vibrated cutting tool, an ARMA modeling is performed on experimental cutting force signals which have a dominant effect on cutting dynamics. The aim of this study is, through Dynamic Date System methodology, to find the inherent characteristics of an ultrasonic vibration cutting process by considering natural frequency and damping coefficient. Surface roughness and stability of cutting process under ultrasonic vibration are also considered

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.82-91
• /
• 1996

In this study, we put our object to carry out adaptive modeling of cutting process in turning system, and to find out the optimal cutting conditions to maximize material removal rate under some constraints. We used a back-propagation neural network to model the cutting process adaptively and a genetic algorithm to find out optimal cutting conditions. The experimental results show that a back-propagation neural network could model the cutting process effciently, and optimized cutting conditions for maximizing the material removal rate were obtained through the adaptive process model and genetic algorithms. Therefore, the proposed approach can be applied to the real machining system.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.73-80
• /
• 1993

There and two important variables in machining process control, which are feed and cutting speed. It is possible to improve the machining accuracy and the productivity by maintaining the optimal feed and cutting speed. In this work, a controller is designed to achieve on-line cutting force control based on the modeling of cutting process dynamics established through step response test. Two schemes are proposed and implemented. The first is feed control under the constant spindle speed and the second is spindle speed control under the constant feed. Finally, both are proved to work properly through simulation and experimentation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1412-1422
• /
• 1993

As a part of development of process planning system for mold die manufaturing, a software system is developed, which recognizes features and extracts parameters of the shape from design data produced by solid modeller. The recognized feature date is fed to process planning and operation planning system. Low level geometry and topology data from commercial CAD system is transformed to high level machining feature data which used to be done by using a dedicated design system. The recognition algorithm is applied to the design data with boundary representation produced by a core modeller ACIS which has object oriented open architecture and is expected to become a common core modeller of next generation CAD system. The algoritm of recognition has been formulated for 21 features on prismatic components, but the feature set can be expanded by adding rules for the additional features.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.109-110
• /
• 2009

"드럼 코아시편 채취장치" 는 침출/내수성 시험, 압축강도 측정시험, 열 순환 시험등 의 파괴적 물성시험을 수행하기 위해서 경질(시멘트 고화체) 및 연질(파라핀왁스) 등의 방사성폐기물드럼으로부터 코아 시료를 채취하는 장비이다, 시편채취의 최대길이는 860 mm 이며 코아 시편의 직경은 50~200 mm 이며 일반적으로 "방사성폐기물 고화체의 물성시험"에 사용되는 시편은 실험실적으로 제조한 소규모 모의 고화체 시편과 고화공정에서 직접 채취한 소규모 시편, 200L 드럼으로부터 코아시편을 채취 가공하여 만든 시편과 같이 3종류가 있다. 고화공정에서 발생되는 고화체는 일반적으로 200 L 드럼에 주입되며, 고화체의 균일성 정도는 고화공정의 특성, 폐기물/고화매질 혼합비, 200 L 고화체 드럼의 냉각방식에 따라 다르다. 따라서, 실험실에서 제조한 시편과 공정에서 채취한 소규모시편은 실제 고화공정을 대표할 없으며 또한 실제 발생된 고화체의 조성과도 동일하다고 볼 수 없다. 따라서 200 L 드럼으로부터 코아시편을 채취하여 만든 시편이 고화공정과 고화체를 대표할 수 있는 시편으로 볼 수 있다 그러므로 고화체 및 고화공정을 대표할 수 있는 코아시편을 채취할 수 있는 장치를 제작하여 다양한 코아시편을 200 L 고화체 드럼으로부터 수직 코아시편을 채취할 필요가 있으며 실험에서 코아시편 채취속도와 연관된 Z-AXIS 의 Rpm은 운전범위는 0-2000 Rpm 이나 이때 너무 빠른 속도는 기계에 치명적인 손상을 초래 할 수 있으므로 위험한 것으로 나타났으며 500-1000 Rpm 의 속도가 적합한 것으로 시험되었으며 시편을 절삭하는 Spindle의 Rpm은 운전범위는 0-1500Rpm 이나 무리한 운전을 피해 가장 적절한 Speed로 운전해야하며 시험결과 500-800Rpm 이 최적운전범위로 나타났다 또한 시멘트고화체에서의 코아 채취시험에서는 Spindle의 속도는 500 Rpm, Z -AXIS 의 Rpm은 900 Rpm이 가장 적합한 것으로 나타났으며 성능평가시험을 통하여 비트부의 절삭속도와 Z축의 이동속도에 관한 그라프를 획득하였으며 시편의 크기에 따라서 Spindle의 속도를 증감하여야함을 확인할 수 있었다.

• Journal of Intelligence and Information Systems
• /
• v.2 no.1
• /
• pp.27-44
• /
• 1996

컴퓨터통합생산 시스템의 실현을 위한 중요한 분야의 하나의 부품설계도면으로부터 최종제품을 생산 하는데 필요한 공정계획의 자동화, 즉 컴퓨터지원 자동공정계획(Computer Aided Process Planning ; CAPP) 시스템 기술의 개발이다. 국내외적으로 금형가공 부품을 대상으로 한 CAPP 시스템의 개발은 비교적 저조하므로, 본 연구에서는 사출금형 부품을 대상으로 하여 실용성이 있는 공정계획 전문가시스템 개발을 목적으로 한다. 본 연구에서 금형 공정계획전문가의 경험적 지식을 기반으로 한 사출금형부품의 공정계획 전문가시스템인 MOLDCAPP을 개발하였다. MOLDCAPP 시스템은 도면정보로부터 형상정보를 자동적으로 인식하여 공정계획의 기능 중에서 가동공정, 가공공정 순서, 공작기계 및 절삭공구를 자동적으로 결정한다. 개발된 MOLDCAPP 시스템은 실제 사례연구를 통하여 그 타당성을 분석하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.55-61
• /
• 2009

This paper describes a point of production(POP) system which collects and manages real-time shop floor machining information in a wafer dicing process. The system are composed of POP terminal, line controller and network. In the configuration of the system, LAN and RS485 network are used for connection with the upper management system and down stratum respectively. As a bridge between POP terminal and server, a line controller is used. The real-time information which is the base of production management are collected from information resources such as machine, product and worker. The collected information are used for the calculation of optimal cutting condition. The collection of the information includes cutting speed, spout of pure water, accumulated count of cut in process for blade and wafer defect. In order to manage machining information in wafer dicing process, production planning information is delivered to the shop floor, and production result information is collected from the shop floor, delivered to the server and used for managing production plan. From the result of the system application, production progress status, work and non-working hour analysis for each machine, and wafer defect analysis are available, and they are used for quality and productivity improvements in wafer dicing process. A case study is implemented to evaluate the performance of the system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.274-278
• /
• 2014

Machining performance is often limited by chatter vibration at the tool-workpiece interface. Chatter vibration is a type of machining self-excited vibration which originated from the variation in cutting forces and the flexibility of the machine tool structure. Cutting tooling method is one of major factor to chatter vibration in turning process. Even though lots of cutting tooling methods are developed and used in machining process, precise analysis of cutting tooling effect in view of chatter vibration behavior. This study presents numerical and experimental approaches to verify and effects of various cutting tooling geometry and clamping method on the onset of chatter vibration. Acquired knowledge from this study will apply the optimal geometry design of cutting tooling and adjusting of machining process.