• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.362-365
• /
• 2010

실시간 운영체제 iRTOS는 타이머의 관리 기법으로 시간결정성을 위한 델타 프로세싱을 사용하고 있다. 델타 프로세싱은 타이머들 사이의 시간차로써 타이머를 관리하기 때문에 타이머의 삽입 시 해당 타이머가 삽입 될 위치를 찾는 데 있어 오버헤드가 발생한다. 이 오버헤드를 줄이기 위한 방법으로 타이머들 간의 상대적인 시간이 아닌 각 타이머의 절대적인 시간으로써 타이머들을 관리하는 방법이 있다. 본 논문에서는 절대적인 시간을 이용하여 타이머들을 관리하는 기법인 타이밍 휠을 설계 및 구현하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.103-110
• /
• 2000

Shaft encoder which encodes the rotational angle of a shaft becomes more important recently due to factory automation and office automation. Although an absolute type encoder is more dsirable due to its convenience an incremental encoder is commonly used because of its cost and technical difficulties Fabricating a high resolution absolute encoder is very diff-cult because the physical size is limited by currently available technology. In order to overcome this difficulty Moire fringe can be used incorporated with gray code. In order to measure the position of fringes which move as the code disk rotates a neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software which needs a little long calculation time. However using nerual network method can eliminate such calculation time even though it needs learning job The pro-posed method is verified through several experiments.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.696-697
• /
• 2015

In this paper, the shape of the slit to provide a view of the sensor in such a manner as to encode the rotor position information using a single sensor for studies of economic rotor position and speed detection method for electric motor drive has a special electronic commutator bar-and proposes a robust encoder can produce a rotor position information for each of the woman, and reads out the location information by using the position detection method of the proposed new method compared to traditional DSP Capture function of incremental encoder that its validity was verified through experiments.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.320-325
• /
• 1999

An absolute type shaft encoder which utilized moire fringe will be presented in this paper. Linear moire fringe is commonly used to measure the displacement of the linear motion. However, an absolute encoder which measure the rotation angle of a shaft is operated usually with a code disk which the gray code pattern is printed on. Such encoder has inherently resolution limit because of the patterning mechanism and sensing mechanism. In order to measure the position of fringes which move as the code disk rotates, neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software, which needs a little long calculation time. However, using neural network method can eliminate such calculation time, even though it needs learning job. The proposed method is verified through several experiments.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.103-105
• /
• 2010

우리나라는 지리적 메커니즘을 고려할 때 지각판 거동에 의한 지진발생 가능성을 가지고 있으며, 최근들어 지진 횟수가 증가됨에 따라 지진에 대한 우려와 관심이 커지고 있다. 이에 본 연구에서는 지진 발생 가능성이 높은 단층지역에 위치하고 있는 양산 상시관측소로부터 수신한 GPS 자료를 정밀절대측위 방법으로 처리하고, 양산지역의 지각변동량을 계산하였다. 연구결과 양산지역은 방위각 약 $131^{\circ}$의 4cm/year 속도로 이동하고 있음을 알 수 있었으며, 이러한 결과는 양산단층지역에 대한 지구 물리 해석의 기초자료로 활용이 가능할 것으로 기대된다.

• Progress in Medical Physics
• /
• v.26 no.3
• /
• pp.143-152
• /
• 2015

In this study, we aim to design the architecture of the kV imaging system for tumor tracking in the dual-head gantry system and analyze its accuracy by simulations. We established mathematical formulas and algorithms to track the tumor position with the two-pair kV imaging systems when they are in the non-orthogonal positions. The algorithms have been designed in the homogeneous coordinate framework and the position of the source and the detector coordinates are used to estimate the tumor position. 4D XCAT (4D extended cardiac-torso) software was used in the simulation to identify the influence of the angle between the two-pair kV imaging systems and the resolution of the detectors to the accuracy in the position estimation. A metal marker fiducial has been inserted in a numerical human phantom of XCAT and the kV projections were acquired at various angles and resolutions using CT projection software of the XCAT. As a result, a positional accuracy of less than about 1mm was achieved when the resolution of the detector is higher than 1.5 mm/pixel and the angle between the kV imaging systems is approximately between $90^{\circ}$ and $50^{\circ}$. When the resolution is lower than 1.5 mm/pixel, the positional errors were higher than 1mm and the error fluctuation by the angles was greater. The resolution of the detector was critical in the positional accuracy for the tumor tracking and determines the range for the acceptable angle range between the kV imaging systems. Also, we found that the positional accuracy analysis method using XCAT developed in this study is highly useful and will be a invaluable tool for further refined design of the kV imaging systems for tumor tracking systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.165-170
• /
• 2015

The topic of this paper is the advanced absolute altitude determination for 3-D positioning using barometric altimeter and the reference station. Barometric altimeter does not provide absolute altitude because atmosphere pressure always varies over the time and geographical location. Also, since Global Navigation Satellites system such as GPS, GLONASS has geometric error, the altitude information is not available. It is the reason why we suggested the new method to improve the altitude accuracy. This paper shows 3-D positioning algorithm using absolute altitude determination method and evaluates the algorithm by real field tests. We used an accurate altitude from RTK system in Seoul as a reference data and acquired the differential value of pressure data between a reference station and a mobile station equipped in low cost barometric altimeter. In addition, the performance and advantage of the proposed method was evaluated by 3-D experiment analysis of PNS and CNS. We expect that the proposed method can expand 2-D positioning system 3-D position determination system simply and this 3-D position determination technique can be very useful for the workers in the field of fire-fighting and construction.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.304-313
• /
• 2016

It is necessary to receive telegrams transmitted by transponder tags installed along the track in order to detect the exact position of a high-speed train. In a high-speed railway environment, telegrams can be corrupted by the electromagnetic interference that comes from onboard electric train power equipment or wayside devices. In this study, we verified the railway environment compatibility of a high-speed transponder system developed as a train position detection system. We installed transponder tags on the Honam high-speed line and measured the number of error-free telegrams received from the transponder tag while the HEMU-430X was running at 268km/h~334km/h. Based on the measurement, we estimated the length of the contact zone formed between the transponder reader and tag. Field test results allow us to estimate how many error-free telegrams can be received when HEMU-430X is at speeds up to 400km/h.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.106-112
• /
• 2017

In the paper, we propose a levitation and a propulsion controller for the magnetic levitation logistic transportation system. The levitation controller is designed considering the mutual influence of the electromagnets to minimize roll and pitch movements. In order to solve the structural disadvantages of the magnetic levitation transportation system, we improve the problem of the existing controller by applying the exponential filter to the reference input. DSP-based control hardware is developed and the levitation control method is verified by levitation experiments to the air gap goal. The propulsion controller uses the space vector voltage modulation method. The propulsion controller is designed to follow the position and velocity profile by detecting the absolute position from the bar code information attached to the rail. The position control result shows satisfactory performance through the propulsion control reciprocating motion experiment.

• Information and Communications Magazine
• /
• v.25 no.4
• /
• pp.5-10
• /
• 2008

지능형 로봇은 자율적으로 이동할 수 있어야 한다는 것이 PC와 기본적으로 다른 점이다. 이동 로봇이 자율 주행할 때 꼭 필요한 기술이 위치 인식 기술과 장애물 감지 기술이다. 장애물 감지 기술은 이동 로봇이 다른 물체와 충돌하지 않도록 하기 위해 필요한 기술이지만 위치 인식 기술은 로봇이 현재 위치를 알고 목적지로 주행하기 위해 매우 중요한 기술이다. 지능형 로봇의 자율 주행 측면에서 위치 인식 기술은 필수적 핵심 기술이다. 위치 인식 센서는 로봇의 절대 위치 및 방향각 정보를 획득하여 실시간으로 관련 데이터를 지능형 로봇에 전달한다. 이로써 지능형 로봇의 이동 경로와 방향 제어가 가능해지고, 로봇을 보다 안정적으로 제어할 수 있다. 즉 로봇이 자기 위치를 인식한 후에야 안정적이고 지속적인 자율 주행이 가능해진다. (주)나인티시스템은 네트워크 기반 위치 파악용 indoor GPS 개념으로 로봇 위치 파악 센서 iGS를 개발하여 공급하고 있다. (주)나인티시스템이 개발한 iGS는 지능형 로봇의 거리, 위치, 방향을 파악하기 위해 초음파 송/수신부 및 RF 모듈로 Handware가 구성되어 있고 위치 추정 알고리즘, 장애물에 강건한 알고리즘 등이 Firmware를 구성하고 있다. 로봇 시장의 잠재적 성장 가능성을 고려할 때 로봇의 자율 운용에 필수적인 위치 파악 요소 기술을 선개발하여 상업화하는 것은 경제적으로도 큰 의미를 갖는다. 뿐만 아니라 위치 파악 요소 기술의 선도적 개발에 의해 미래 지능형 로봇시장을 주도할 수 있는 계기도 기대할 수 있다. Robot에 적정 가격대의 위치 인식 기술이 접목되면 Robot 산업의 활성화가 가능하다. 현재 청소용 Robot은 충돌 방지정도의 인식을 하고 있지만 위치 인식 기술이 접목되면 청소용 Robot이 더 많은 Service를 제공할 수 있다. 더 많은 Service의 실행으로 Robot 산업이 활성화되면 관련 요소기술 산업이 활성화된다. Robot 산업과 부품 산업이 활성화되면 Robot 관련 산업의 수익 Model이 다양해 진다. 위치 인식 기술은 Robot 산업뿐 아니라 산업 전반의 활성화에도 크게 기여할 것이다. 위치 인식 기술은 지능형 Robot의 자율 주행뿐 아니라 다양한 분야에 응용이 가능하다. 또한 위치 인식 기술을 국산화하면 기존 수입품을 대체할 뿐아니라 수출 시장의 진출에도 크게 기여할 수 있다.