• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.419-429
• /
• 2009

This study focuses on the effect of the cutting order of prestressing strands on the strain change in the strands and on the state of stress of concrete, experimentally and numerically. In the experiment, strain of strands and of transversal reinforcement were measured for three different cutting orders during detensioning process by using flame-cutting procedure. The experimental results were compared with those obtained from the FE analysis. As a results of the experiment, it is confirmed that the cutting order of prestressing strands affected on the strain of strands as well as of transversal reinforcement. The FE analysis gave similar results to those obtained from the experiment. Therefore, the cutting order should be chosen appropriately to when the strands get detensioned.

• Journal of the Korean Data Analysis Society
• /
• v.20 no.6
• /
• pp.2813-2827
• /
• 2018

Progressive censoring schemes have become quite popular in reliability study. Under progressive censored data, however, some units can be failed between two points of observation with exact times of failure of these units unobserved. For example, loss may arise in life-testing experiments when the failure times of some units were not observed due to mechanical or experimental difficulties. Therefore, multiply progressive censoring scheme was introduced. So, we derives a maximum likelihood estimator of the parameter of exponential distribution. And we introduced the goodness-of-fit test statistics using order statistic and Lorenz curve. We carried out Monte Carlo simulation to compare the proposed test statistics. In addition, real data set have been analysed. In Weibull and chi-squared distributions, the test statistics using Lorenz curve are more powerful than test statistics using order statistics.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.341-344
• /
• 2008

In this paper, the effect of flame cutting order of tendons on the concrete stress was investigated experimentally. For this, the three slab specimens with 14 tendons were cast and tested. During the detensioning, the longitudinal and transversal strain were measured. Test results showed that the measured strains of transversal stirrups were varied by the cutting order.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.09a
• /
• pp.406-414
• /
• 1995

자재절단문제를 일반적인 알고리즘을 사용하여 해결하였을 경우 패턴이 형 성되었을 때 계속되는 패턴에서 부품들이 연속하여 절단되 나오지 않게 된 다. 이와같이 부품이 연속되어 나오지 않는 경우를 부품이 단락 (discontinuity)되어진다고 이야기 한다. 이럴 경우 각 부품들은 원하는 주문 량만큼 절단되어 나올 때까지 생산라인에서 대기하고 있어야 한다. 따라서 생산라인에서는 절단된 모든 부품들을 임시적으로 적재해 놓아야 하므로 공 종소요가 증가하게 되고 절단공정이 혼잡해 지게 된다. 이를 볼때 절단되어 나오는 부품들이 계속되는 패턴에서 연속적으로 절단되어지게 하는 것이 중 요하다. 이와같이 부품들이 단락되어지지 않고 연속적으로 생산되면 공정소 요를 줄일수 있게 될 뿐 아니라 생산성의 향상을 기할수 있게 될 것이다.

• IE interfaces
• /
• v.9 no.2
• /
• pp.83-94
• /
• 1996

본 논문에서는 자동차용 전기배선 제조공정 중 절압공정을 대상으로 기계별 작업순서결정에관한 개선된 방법에 관하여 연구한다. 기계별 작업순서에 대하여 작업자들이 현장에서 느끼는 불편한 점들을 개선하려는 목적에서 연구를 진행하였음 개선된 방법을 통하여 자재교환과 치구교환횟수를 감소시킬 수 있었다. 그 결과 기계가동율이 향상되었고 계획된 작업순서에 대한 작업준수율을 높일 수 있었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.90-98
• /
• 2000

Nesting and cutting path optimization have a great effect on price competitions and improvement of productivity in various industries such as the shipbuilding, the auto, the clothing, and so on. But the theoretical approach on the development of cutting path optimization algorithm, which can be applied effectively in the shipbuilding, has not been performed enough because parts are so complex and various. In this study, a new solution has been presented to solve the cutting path problem in 2-D cutting by using improved genetic algorithm. The presented optimization algorithm can search not only the cutting sequence of parts but also the position of piercing point by applying the effective neighborhood solution generating method

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.206-208
• /
• 2018

울산신항의 활발한 개발로 인하여 기존에 설치되어 있던 온산항북방파제는 원래의 목적인 방파제로서의 기능은 사라지고, 울산항 3항로에 간섭된 지장물이 됨에 따라, 기존방파제의 철거를 수행하였으며 철거순서는 상치 콘크리트 깨기, 속채움 제거, 케이슨 절단 및 천공, 인양 및 제거, 케이슨 파쇄의 순서로 진행되었다. 특히, 파쇄한 콘크리트는 크라싱 작업을 통해 재생골재로 생산하였으며, 향후 신설케이슨의 속채움 재료로 재활용하는 것으로 하여 경제적 자원재활용에도 기여하고 있다.

• Korean Journal of Microbiology
• /
• v.24 no.2
• /
• pp.79-85
• /
• 1986

We have determined the sequence of $tRNA^{Arg}$ of A. nidulans partially by enzymatic rapid RNA sequencing technique. The sequence was 5'GGCCGGCUGGCCCAAXUGGCAAGGXUCUGAXUACGAAXCAGGAGAUUGCACXXXXXGAGCXXUXXGUCGGUCACCA3' The cloverleaf structure was made from above data. As a result, the anticodon sequence was identified as ACG. This result was confirmed with charging test. The complete sequence was proposed by supplementing the DNA sequence to and by assigning the position of minor bases to this RNA sequence.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.180-191
• /
• 2013

The purpose of this research was to find an optimal quarrying for marble by analyzing the applicability and the work efficiency of a chain saw machine newly introduced in the underground Baekwoon mine. From the test results of the physical properties of Baekwoon marble, which affects the efficiency of rock cutting, it was found to have similar physical characteristics as the ones which are now being produced in the other areas in Korea. And especially it shows isotropic property, which can be thought to be advantageous as a dimensional stone. To check the long-term quality of the marble as a stone material, several tests such as corrosion resistance test and abrasion test were carried out. It was found to be vulnerable to acid rain with decrease of weight and seismic wave velocity after applying artificial rain at pH 5.6 for 50 times. The percentage of wear from abrasion test was 22.67%. The working time and cutting speed of the chain saw machine were recorded and analyzed during the test-run at the quarry. The overall work cycle was assorted into 9 unit operations and the operating time per each unit was drawn. The operating times for the two cutting patterns, which could be possibly applicable to the work site, were compared. The results indicated that the pattern B, that the cutting sequence was set to minimize the movement of the machine, showed 6% less working hours than the pattern A, which first cuts the outer boundary. With cutting pattern analysis, the ore body in the Baekwoon mine was 3 dimensionally modeled and a quarrying plan considering the existing conditions of the marble was suggested.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.143-152
• /
• 2013

Given weighted graph G=(V,E), n=|V|, m=|E|, the minimum cut problem is classified with source s and sink t or without s and t. Given undirected weighted graph without s and t, Stoer-Wagner algorithm is most popular. This algorithm fixes arbitrary vertex, and arranges maximum adjacency (MA)-ordering. In the last, the sum of weights of the incident edges for last ordered vertex is computed by cut value, and the last 2 vertices are merged. Therefore, this algorithm runs $\frac{n(n-1)}{2}$ times. Given graph with s and t, Ford-Fulkerson algorithm determines the bottleneck edges in the arbitrary augmenting path from s to t. If the augmenting path is no more exist, we determine the minimum cut value by combine the all of the bottleneck edges. This paper suggests minimum cut algorithm for undirected weighted graph with s and t. This algorithm suggests MA-merging and computes cut value simultaneously. This algorithm runs n-1 times and successfully divides V into disjoint S and V sets on the basis of minimum cut, but the Stoer-Wagner is fails sometimes. The proposed algorithm runs more than Ford-Fulkerson algorithm, but finds the minimum cut value within n-1 processing times.