• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.75-80
• /
• 2003

The electromagnetic wave absorption ability of natural ceramics(NC), natural lacquer, and rubber was investigated. The natural ceramics showed absorption ability above 2.5dB at 2.5GHz~4.5GHz and natural lacquer showed better electromagnetic wave absorption ability than that of rubber. The simulation results of electromagnetic wave absorber ability in a absorber composed of natural lacquer and ferrite showed the reflection coefficient of -16dB at 0.5GHz~10GHz. It was shown that from the simulation results, the electromagnetic wave absorber composed of lacquer as a backing material have better absorption ability than that of the electromagnetic absorber composed of rubber.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.290-295
• /
• 2003

In this study, we investigated the effect of particle size of Mn-Zn ferrite which is used as a material of electromagnetic wave absorber on electromagnetic wave properties. With increasing the particle size, the matching frequency is shifted toward lower frequency and the absorption ability of electromagnetic wave is decreased. We suggest that a sheet-type ferrite absorber composed of Mn-Zn ferrite with large particle is useful to compare with it composed of small particle size for mobile phone.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.193-197
• /
• 2009

In this paper, the EM wave absorber was designed and fabricated for improvement of Wireless LAN environment at 2.4 GHz. We fabricated several samples in different composition ratios of Sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Sendust and CPE was searched as 80: 20 wt.% by experiments and simulation Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the EM wave absorber was fabricated based on simulated data. Simulated and measured results agreed well. As a result, the developed EM wave absorber with thickness of 3.25 mm has absorption ability of 19 dB at 2.4 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.296-304
• /
• 1998

A design method of an electromagnetic wave absorber with ferrite fins in the second layer, which has very wide band frequency characteristics and is used for single-polarized wave absorption such as TV wave etc, has been designed. To examine the effectiveness of the Equivalent Material Constants Method$(EMCM)^{[1]}$ which is approximate method, the effective complex permittivity calculated by the Hashin-Strikman formulas and the EMCM are compared. Since, furthermore, the reflectivities by the EMCM in space and the FDTD method in an rectangular waveguide agreed well each other, it has been confirmed that the proposed electromagnetic wave absorber has excellent absorption characteristics in the frequency range of 30 MHz to 5830 MHz. Thus, it can be concluded that the EMCM is usefull to design and analyze the electro-magnetic wave absorber proposed here.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.349-353
• /
• 2008

In this paper, the EM wave absorber was designed and fabricated for preventing Reader Interference of RFID communication system in UHF band We fabricated several samples in different composition ratios of Amorphous and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Amorphous and CPE was searched as 80 : 20 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has a thickness of 4 mm and absorption ability was over 20 dB in frequency range of $860\;MHz{\sim}960\;MHz$. Therefore, it was confirmed that the developed absorber can be used for suppressing RFID reader interference in UHF band.

• Composites Research
• /
• v.24 no.2
• /
• pp.38-45
• /
• 2011

In this paper, we present an optimization method for the single Dallenbach-layer type microwave absorbers composed of E-glass fabric/epoxy composite laminates. The composite prepreg containing carbon nanotubes (CNT) was used to control the electrical property of the composites laminates. The design technology using the genetic algorithm was used to get the optimal thicknesses of the laminates and the filler contents at various center frequencies, for which the numerical model of the complex permittivity of the composite laminate was incorporated. In the optimal design results, the content of CNT increased in proportion to the center frequency, but, on the contrary, the thickness of the microwave absorbers decreased. The permittivity and reflection loss are measured using vector network analyzer and 7 mm coaxial airline. The influence of the mismatches in between measurement and prediction of the thickness and the complex permittivity caused the shift of the center frequency, blunting of the peak at the center frequency and the reduction of the absorbing bandwidth.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.40-46
• /
• 1994

Design and microwave absorbing properties of ferrite plate are investigated for the application to the radiowave absorbers used in anechoic chamber. The required frequency-dependence of complex permeability is determined on the basis of wave-impedance-matching relationship. The plate thickness and matchingfrequency are determined from the complex permeability and dielectric constant, and then compared with the directly measured reflection loss. A systematic variation of material constants and their influence on the microwave absorbing properties are demonstrated.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.43-50
• /
• 2003

전자산업과 전파통신기술이 고도로 발전함에 따른 전파 이용의 증대로 인해 전자파환경 EMI/EMS이 사회적 문제를 야기하고 있다. 이에 따라, CISPR(Comite Internationale Special des Perturbations Radioelectrique), FCC (Federal Communications Commissions) ANSI (American National Standards Institute)등의 기구는 EMI/EMC 대책을 위해 전파환경의 규정을 제정하고 있다. 또한 EMI/EMC 측정을 위한 전파무향실(anechoic chamber)용 전파흡수체는 20 dB 이상의 전파흡수능이 요구된다. 종래의 EMI 측정 주파수 범위는 30 MHz～l,000 MHz 이었으나 1998년 11월, CISPR11은 1 GHz~18 GHz를 추가하는 안을 받아들였다. 본고는 새로운 형태의 다층형 페라이트 전파흡수체를 제안하고 등가재료정수법을 사용하여 광대역 설계를 시도한 것이다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.343-343
• /
• 2001

최근 전자산업과 전파통신산업의 발달에 따라 불요전자파에 의한 전자파장해가 심각한 수 준에 이르게 되었다. 그 결과 국 . 내외 전자파환경은 나날이 악화되고 있으며, 이로 인한 사 회적 문제가 점차 증가되고 있는 실정이다. 이에 대한 대책으로 CISPR(Comite Internationale S Special des Perturbations Radioelectrique), FCC (Federal Communications Commissions) A ANSI(Amercian National Standards Institute) 둥이 주축이 되어 국제 규정이 제정되어 각종 전자기기들에 대해 방사(EMI) 및 내성(EMS)의 규제가 강화되고 있다. 그러나 국제규정이 요구하는(30 MHz - 18 GHz) 주파수 범위에서의 EMIjEMS 측정을 하기 위해 광대역(Broad-band) 전파무향실(Anechoic Chamber)이 필요하지만1 기존의 Ferrite T Tile 또는 그리드형 전파홉수체는 20 dB 이상 전파를 홉수할 수 잇는 주파수 대역이 30 M MHz - 400 MHz 또는 780 MHz에 불과하기 때문에 상기의 조건을 만족하는 전파무향실 을 구성하기에는 곤란한 실정이다. 본 논문에서는 국제 규격을 만족하는 전파무향실을 위한 광대역 전파홉수체를 개발하기 위해, 다충형으로 구성하고, 전파흡수체의 형상을 변화시켜 등가재료정수법을 사용하여 설계하고 그 특성을 평가함을 그 목적으로 하였다. 따라서 본 논문에서는 본 연구실에서 기폰에 제안한바 있는, 금속판 위에 타일형 페라이 트 충, 그 위에 원추절단형 페라이트 층과 원통형 페라이트 층을 적층시칸 형상의 전파홉수 체는 30 MHz - 6 GHz 정도까지 커버할 수 있으나, 1 GHz 부근의 주파수 대에서 16 dB 정도의 홉수능 밖에 가지지 못하였다. 이를 개선하기 위해, 금속판 위에 타일형 페라이트 층 을 형성하고 그 위에 원통형 페라이트 충, 원추절단형 페라이트 충I 원통형 페라이트 충, 타 원형 페라이트 충을 형성한 새로운 형태의 전파홉수체를 제안하였다. 본 논문에 제안한 새로운 형태의 전파흡수체의 시물레이션 결과 30 MHz - 20 GHz의 주파수 범위에서 전반적으로 25 dB이상의 전파흡수능을 가짐을 확인하였으며/ 특히 기폰에 제안한 전파홉수체와 비교하면,1GHz 부끈에서의 전파홉수능을 10 dB 이상 개선하였다. 나아가서/ 실재로 제작한 전파흡수체의 측정된 주파수특성이 시율레이션에 의한 이론치와 3 30 MHz - 6 GHz의 범위에서 잘 일치함을 확인하였다. 또한y 전파 홉수체의 전체 높이는 2 27 mm 밖에 되지 않으므로 본 연구에서 제안한 전파 홉수체를 사용할 경우 전파무향실의 유 효공간 확보에 매우 유리한 이점을 가진다

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1329-1334
• /
• 2003

We prepared EM wave absorbers by using recycled Ba ferrite far GHz frequency, and investigated the effects of carbon additions and preparation temperatures on their EM wave absorption properties. We clarified that it is very important to consider carbon amounts in Ba ferrite and preparation temperature for Ba ferrite EM wave absorbers with high quality.