• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1501-1509
• /
• 2001

Recently, the use of wireless communication systems has been rapidly increasing, which results in a difficult problem in efficient control of limited frequency resources. As a way of solving this problem, the ultra wideband time hopping impulse radio system attracts much attention. The impulse radio system communicates pulse position modulated data using Gaussian monocycle pulses of very short duration less than 1 nsec. Thus the transmitted signal has very low power spectral density and ultra wide bandwidth from near D.C. to a few GHz. It is blown that it hardly interferes with the existing communication systems because of its very low power spectral density. The purpose of this paper is to characterize multipath propagation of the impulse radio signal and to evaluate the performance of the correlator-based receiver for the multipath environments. In this paper, we consider the deterministic two-path model and the statistical indoor multipath model of Saleh and Valenzuela. For the two-path model the output of the correlator with the ideal reference waveform varies according to the relative difference between the indirect path delay and the time interval of PPM, and to the indirect path gains. In addition, the characteristics of bit error rates is measured for the two models through computer simulation. The simulation results indicate that the performance of the impulse radio system depends both on the relative difference between the indirect path delay and the time interval of PPM, and on the indirect path gains. Furthermore, it is observed that the reference signal designed for the AWGN channel can not be applied to the multipath channels.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.315-324
• /
• 2012

This paper presents a numerical investigation of the deflagration-to-detonation transition (DDT) of flame acceleration by a shock wave filled with an ethylene/air mixture as the combustible gas, considering geometrical changes by using obstacles and bent tubes. The model used consists of the reactive compressible Navier-Stokes equations and the ghost fluid method (GFM) for complex boundary treatment. Simulations with a variety of bent tubes with obstacles show the generation of hot spots through flame and strong shock-wave interactions, and restrained or accelerated flame propagation due to geometrical effects. In addition, the simulation results show that the DDT occurs with a nearly constant chemical heat-release rate of 20 MJ/($g{\bullet}s$) in our numerical setup. Furthermore, the DDT triggering time can be delayed by the absence of unreacted material together with insufficient pressures and temperatures induced by different flame shapes, although hot spots are formed in the same positions.

• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.337-344
• /
• 2008

Underwater acoustic sensor networks exhibit characteristics such as high propagation delay and low data rates, which are different from those of terrestrial wireless networks. Therefore, the conventional protocols used in wireless networks can be restrictive and inefficient when applied to underwater acoustic sensor networks. In this paper, we propose a medium access control protocol (MAC) to enhance the energy efficiency and throughput in underwater acoustic sensor networks. The proposed protocol employs a slot-based competition mechanism that reserves a time slot to send a data packet in advance. In the proposed protocol, collision between nodes can occur due to competition to obtain a slot. However, the proposed protocol minimizes the collisions between nodes because the nodes store the reservation information of the neighboring nodes, this reduces unnecessary energy consumption and increases throughput. We perform a simulation to evaluate the performance of the proposed protocol with regard to the energy consumption, the number of collision, channel utilization, throughput and transmission delay. We compare the proposed protocol with the conventional protocol, and the performance results show that the proposed protocol outperforms the conventional protocol.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.259-270
• /
• 2010

In this paper, a Location Information-based Gradient Routing (LIGR) algorithm is proposed for setting up routing path based on physical location information of sensor nodes in wireless ad-hoc networks. LIGR algorithm reduces the unnecessary data transmission time, route search time, and propagation delay time of packet by determining the transmission direction and search range through the gradient from the source node to sink node using the physical location information. In addition, the low battery nodes are supposed to have the second or third priority in case of forwarding node selection, which reduces the possibility of selecting the low battery nodes. As a result, the low battery node functions as host node rather than router in the wireless sensor networks. The LIGR protocol performed better than the Logical Grid Routing (LGR) protocol in the average receiving rate, delay time, the average residual energy, and the network processing ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.605-612
• /
• 2008

This paper researches the estimating location using repeater effect adjustment method in CDMA based system. Repeaters are commonly used by commercial and amateur radio operators to extend signals in the radio frequency range from one receiver to another. The repeater signals are increasing arrival time from base station to mobile station. So if we calculates the mobile station using repeater signals, the estimating position error is increased. However nobody researched about adjusting repeater effects. This paper proposes repeater effect adjustment algorithm. For adjusting repeater effects, we make the triangle using mobile station, reference base station and neighbor base station, and then detect the repeater effects using the triangle characteristic. The proposed method system showed the improved performance in estimating parameters and locating positions by computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.310-317
• /
• 1993

This paper presents a mechanism for improving performance of the IEEE 802.6 MAN(Metropolitan Area Network), a dual-bus structured high-speed communication network, by a more efficient use of bandwidth. The MAN protocol is able to handle various traffic and offers better transmission speed than the conventional LAN, but the unidirectional bus structure and propagation delay of request bits results in unfairness since higher nodes use more bandwidth. As the number of stations and the distances between them are increased, the problem becomes mere serious. As a solution, this paper presents a method that every station enables to identify the used slots, and that a specified class denoted 'erasure station' has with the functions of destination release, slot reuse. As a result, it is export to improve network bandwidth values of each station and the throughput and delay time was analytically analyzed, and it is shown that according to computer simulation results, this mechanism improves the network performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.121-127
• /
• 2016

Satellite communication is a communication method using a satellite as a repeater communication on the air and have a communication range is wide and is possible to transmit high-speed data, so Satellite communication has been highlighted as the next generation communication. However, because the distance between the ground and the satellite is far away, there is a disadvantage that propagation delay time is very long and packet is damaged. Therefore, this study was applied to Link Relay H-ARQ system in order to complement the damage to the packet. Furthermore, we propose the Modified Link Relay H-ARQ scheme is a new scheme to supplementation the delay time. By applying the Markov channel for implementing a channel of satellite communications, the results of analyzing the performance, when applying the Link Relay HARQ scheme, BER and PER performance was improved, when applying the Modified Link Relay H-ARQ scheme, Throughput performance was confirmed improvement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.333-340
• /
• 2018

This paper introduces a BCH code decoder using parallel CRC(: Cyclic Redundancy Check) generation. Using a conventional parallel syndrome generator with a LFSR(: Linear Feedback Shift Register), it takes up a lot of space for a short code. The proposed decoder uses the parallel CRC method that is widely used to compute the checksum. This scheme optimizes the a syndrome generator in the decoder by eliminating redundant xor operation compared with the parallel LFSR and thus minimizes chip area and propagation delay. In simulation results, the proposed decoder has accomplished propagation delay reduction of 2.01 ns as compared to the conventional scheme. The proposed decoder has been designed and synthesized in $0.35-{\mu}m$ CMOS process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10C
• /
• pp.921-926
• /
• 2006

The Presence of a line-of-sight(LoS) blockage can degrade the UWB positioning accuracy for two reasons. Firstly, it makes estimation of the time of arrival(ToA) of the direct path signal difficult by complicating the multipath structure of the propagation channel. Secondly, the higher dielectric constant of the LoS blocking material than that of free space introduces excess propagation delay which will bias the range estimation. In this paper, methods based on ray tracing to reduce the ranging error resulting from the second reason are Posed. We take two different approaches; a statistical approach and a map-aided method. In the statistical approach, we establish a conditional distribution of the excess propagation delay caused by LoS blockages using a ray tracing technique. The lo6wer bound of the ranging performance based on this model is estimated. Ine ray tracing method is also used for the map-aided ToA positioning approach. UWB propagation measurement data taken in an office environment is used to examine the performance of this method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.664-674
• /
• 1996

In high speed multi-wavelength networks, retransmission overhead due to desination conflict or control packet collision is one factor of performance degration because signal prpagation delay is much larger than the transmission time of data packet. In this paper, an efficient WDMA protocol with a collision avoidance mechanism is proposed for high speed WDM single-hop network with a passive star topology. In proposed protocol, each node has cource queues and routing table to store souting informatio. This architecture makes is possible to avoid any kind of collision when a node reserves the channel to transmit a data packet. High system thoughput and channel utilization can be achieved by proposed protocol since there are no discarded packets caused by any collision at transmission time. The performance of proposed protocol is evaluated in term of throughput and delay with variations in offered load. Simulation results show that the proposed protocol has superior performance to convertional protocols under nonuniform traffic as well as uniform traffic.