• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.10a
• /
• pp.112-113
• /
• 1998

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.131-131
• /
• 2002

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.95-98
• /
• 2007

In this paper, we make an analysis of electromagnetic wave absorption properties of $TiO_2$ in W-band. Therefore, we fabricated some samples in different composition ratio of $TiO_2$ and CPE. And the material properties of samples are calculated from S-parameter of samples using $\ell-2\ell$ method. We analyze absorption properties and complex relative permittivitis of samples. As a result, it has verified that absorption properties of sample containing $TiO_2:CPE=70:30wt.%$ have been excelled in W-band.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.111-112
• /
• 2022

자율운항 선박, 무인선 개발과 동 분야 디지털트윈 구현을 위해서는 선박 내부 데이터의 수집을 담당할 고신뢰성 선내 통신망 확보가 필수적이다. WiFi와 같은 전파 기반의 무선통신 시스템은 금속 구조물로 구성되는 선박 내 환경 자체가 원활한 통신의 장애 요소이다. 이러한 극한 환경 극복을 위해 자기장을 금속 표면에 유기하여 비 전파 기반으로 무선통신을 가능하게 하는 표면파 통신이 대안이 될 수 있다. 선박 전체의 일반 배치 관점에서 표면파 통신은 상갑판을 통해 크게 거주구역, 화물구역, 선수구역 및 기관구역 간 백본 통신망을 구성할 수 있으며 각 구역 별로는 부재의 개구부를 통해 금속 표면의 연속면을 확보하여 통신할 수 있다. 수밀 격벽의 표면파 통신 관통을 위해 비 도전체로 수밀은 유지한 채 아주 미세한 구멍을 확보하는 것으로도 금속 표면의 연속성을 확보할 수 있다. 이러한 표면파 통신을 활용하면 전파 기반의 무선통신, 비 전파 기반의 무선통신을 통합적으로 구성하여 선박 전체로는 선내 무선 백본망 구성, 그리고 각 구역 별로는 IoT 센서 네트워크 등의 선박 내부 고신뢰성 무선통신 확보가 가능하다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.1002-1008
• /
• 2001

The absorbing structure composed of multi-layered fiber reinforced composite materials was designed and microwave absorbing properties are investigated. On the basis of transmission line theory, the theoretical equations to predict the reflection loss and the appropriate composite material for each functional layer are suggested. The most significant result of this study is the successful design and fabrication of triple-layered composite laminates which has the superior microwave absorbing porperties (more than 10 dB in 4∼12 GHz range), without using the ferrite filler in the impedance transforming layer. In the two-layered composite laminate (absorber/substrate), however, the use of ferrite filler (about 40 wt %) in the absorbing layer is necessary to obtain the certain level of microwave absorbance. By combining the glass-fiber composite with ferrite filler and carbon-fiber composite substrate, the microwave absorbing properties more than 10 dB in 4∼12 GHz frequencies than be obtained.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.561-571
• /
• 2017

Radio navigation systems are already used as important national infrastructures in various fields such as air traffic, land transportation, geodetic survey, broadcasting communication and national defense, and are used in various industries. Since these systems are fusion of various technologies, it takes much time and cost in the development stage. In the early stages of development of the system, developed countries are establishing a national mid-term plan that meets international compatibility and standards. Korea did not develop the system due to the lack of national mid- and long-term plan, and it is not contributing effectively to industries. This paper analyzes the technical principles and technology trend of radio navigation system in the aviation sector to establish mid - and long - term plan. Based on the analyzed technology trends, the future prospect of technological development of the domestic navigation system and the development of related industries will be presented.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.78-83
• /
• 2016

The characteristics of flame spread under similar atmospheric conditions to those inside the first stage of launch vehicles were investigated to provide fundamental knowledge to prevent fires and explosions of vehicles during launching operations. To this end, the rate of flame spread on the solid fuel was measured at elevated oxygen concentrations and reduced atmospheric pressures. A 0.18 mm diameter optical fiber was used as a solid fuel. The experimental results indicated that elevated oxygen concentrations can increase the rate of flame spread while increasing the atmospheric pressures to 1 atm can lead to decreases in the rate of flame spread. The increases in the rate of flame spread with pressure is due mainly to reductions in the convective heat loss that are clarified through an analysis of the pressure dependence on the convective heat transfer coefficient.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.243-253
• /
• 1997

In land mobile communications, incident waves to mobile antenna com mostly from directions having low elevation angles about $60^{\circ}$ down from the vertical plane. In order to receive this waves effectively, planar type antenna was fabricated and its characteristics were analyzed. This type of antenna is achieved using superstrate effect criteria which are derived for a nonzero radiation field extending down to the substrate layer surface plan. A small planar type microstrip antenna which can receive incident waves having low elevation angle was fabricated. Experimental results show that the band width of the fabricated antenna is 70 MHz at 1.2 GHz and have nonzero field down to the layer surface.

• Composites Research
• /
• v.17 no.5
• /
• pp.68-77
• /
• 2004

The electromagnetic (EM) absorption or shielding characteristics of a material is an important issue not only for military purpose but also for commercial purposes such as radar, electric or telecommunication devices. In order to design the effective electromagnetic wave absorber, the electromagnetic characteristics of the constituents of the material should be available in target frequency band. Also, it must be possible to predict the electromagnetic properties of absorbers with respect to the content of lossy ingredients. In this study, the dielectric properties of unsaturated polyester resins containing nano-size conductive carbon black powder were measured with a free space method in the X-band frequency range and analyzed with respect to the content of carbon black. Finally, the method for estimating the dielectric properties of polymeric resin containing conductive carbon black with respect to the EM frequency was developed and verified.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1058-1064
• /
• 2000

연속슬립캐스팅 및 상압소결법으로 $Al_2$O$_3$/ZrO$_2$적층복합체를 제조하였으며, 적층복합체에서 ZrO$_2$층을 단사정, 정방정 및 입방정으로 각각 달리 적층하여 균열생성 및 전파 거동에 미치는 ZrO$_2$상의 영향을 고찰하였다. 균열 생성은 냉각시 $Al_2$O$_3$층과 ZrO$_2$층 간의 열팽창 계수의 차이에 의한 열적불일치응력이 가장 큰 요인으로 작용하였다. 적층체 내에 존재하는 균열은 tetra-ZrO$_2$의 경우 적층두께 조절로 가능하였으며, cubic-ZrO$_2$의 경우는 냉각속도 조절로 균열밀도로 크게 낮출 수 있었다. $Al_2$O$_3$/ZrO$_2$적층체를 구성하는 세가지 ZrO$_2$상(mono, tetra, cubic)들 중에서 cubic-ZrO$_2$가 포함된 적층체의 경우 $Al_2$O$_3$와 ZrO$_2$계면에 형성된 잔류압축응력으로 인한 균열굴절 효과를 얻을 수 있었다.