• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.878-882
• /
• 2019

XOR(exclusive-OR)-XNOR(exclusive NOR) circuit is a basic component of 4-2 compressor for high performance arithmetic operation. In this paper we propose an energy efficient XOR-XNOR circuit. The proposed circuit is reduced the internal parasitic capacitance in critical path and implemented with 8 transistors. The circuit produces a perfect output signals for all input combinations. Compared with the previous circuits, the proposed circuit has a 14.5% reduction in propagation delay time and a 1.7% increase in power consumption. Therefore, the proposed XOR-XNOR is reduced power-delay- product (PDP) by 13.1% and energy-delay-product (EDP) by 26.0%. The proposed circuits are implemented with standard CMOS 0.18um technology and verified through SPICE simulation with 1.8V supply voltage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.426-435
• /
• 2002

In this paper we present an indoor propagation model for indoor wireless LAN service in the ISM band. We primarily use a 3D ray tracing as well as a patch scattering model in order to take into account the indoor fixtures. Therefore input parameters such as indoor environment parameters and antenna's types, polarizations are considered. As the results, we present fading characteristics and rms delay spread from time delay spread. In order to investigate the accuracy of the presented model, comparisons of predictions with measurement and simulations are performed in indoor wireless LAN service environments. The results show that measurements and simulations are very similar. Therefore in this paper, the effect of presented indoor propagation model is confirmed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.103-107
• /
• 2003

현재 관측점간의 3차원 상대위치를 구하고 기준점의 측지학적 좌표ㆍ표고를 결정하는 작업을 수행하는 GPS(Global Positioning System) 측량은 신호가 전파인 관계로 대기권의 전파지연 오차를 포함하게 되며, 전리층 지연은 주파수에 반비례하는 특성이 있으므로 지역의 대소에 구분 없이 이주파수 수신기(dual-frequency GPS receiver)를 사용하여 정확하게 지연시간을 측정하고 그로 인한 측위정밀도의 정확성을 확보하고 있다. 본 연구는 비교적 낮은 가격인 일주파 수신기를 사용하여 기선거리별로 삼각점을 선점한 후 동일 시간에 관측을 실시하고 취득한 데이터 값을 추출한 후 기선거리에 따른 허용오차를 분석하고, 그 활용성 및 경제성과 일주파 수신기의 기선에 대한 사용 가능성을 분석하였다. 그 결과, 100km이내의 지역에서는 일주파 수신기 만으로도 충분히 만족스러운 결과를 얻을 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.68-71
• /
• 2018

In this paper, we propose a synchronization protocol for underwater acoustic networks which aims to minimize the effects of long propagation delay and uncertain delay variations and employs packet train scheme with considering low data rate. The proposed protocol uses an one-way delay measurement method by transmitting consecutive packets and acquires synchronization only considering propagation delay variations by calculating packet arrival time differences. We perform simulations under various network conditions, such as node mobility, time interval for packet transmission, network range, and elapsed time after synchronizing. The simulation results shows the superiority of our protocol, compared with a previously proposed protocol.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.98-100
• /
• 2012

모바일 웜의 전파 속도는 시간이 지날수록 급격히 빨라진다. 급속도로 전파하는 웜을 억제하기 위한 연구가 계속 진행되어 왔다. 기존 연구 중 하나로 소셜 네트워크를 그래프(Graph)로 표현하고 분할한 뒤 각 파티션의 대표노드(Key Node)를 선택해 웜 패치를 전파하는 기법이 있다. 이 기법은 패치 전파 속도를 웜 전파 속도보다 빠르게 해서 웜을 억제 시킨다. 하지만 이 기법에서는 대표노드에 가중치(Weight)가 낮은 간선(Edge)이 연결 될 수 있거나 대표노드가 없는 파티션이 생길 수 있다. 잘못된 대표노드 선정은 패치 전파속도를 저하시키고 웜 억제를 지연시킬 수 있다. 본 논문에서는 페이지랭크를 이용해서 대표노드를 선정하는 개선된 소셜 네트워크 기반의 웜 패칭 기법을 제안한다. 제안 기법은 웜 패칭 전략에 사용할 수 있도록 수정한 페이지랭크를 각 파티션에 적용해서 대표노드를 선정한다. 파티션마다 전파 능력이 가장 높은 노드가 대표노드로 선정되기 때문에 웜 패치 전파 속도를 향상시킬 수 있다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.04a
• /
• pp.202-206
• /
• 1991

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.44-48
• /
• 2002

본 논문에서는 한국형 디지털 서명 표준인 KCDSA에서 사용할 목적으로 개발된 국내 해쉬 함수 표준인 HAS-160 알고리즘을 VLSI 설계하였다. 하나의 단계연산을 하나의 클럭에 동작하고 단계연산의 핵심이 되는 4개의 직렬 2/sup 3/ 모듈러 가산기를 CSA(Carry Save Adder)로 구현하여 캐리 전파시간을 최소로 하고 HAS-160 해쉬 알고리즘의 특징인 메시지 추가생성을 사전에 계산하여 지연시간을 줄이는 설계를 하였다. 설계된 해쉬 프로세서를 0.25 urn CMOS 스탠다드 셀 라이브러리에서 합성한 결과 총 게이트 수는 약 21,000개이고 최대 지연 시간은 5.71 ns로 최대 동작주파수 약 175 MHz서 약 1,093 Mbps의 성능을 얻을 수 있었다.

• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.6-11
• /
• 2011

This paper describes the design of new method of propagation delay measurement in micro and nanostructures during characterization of ASIC standard library cell. Providing more accuracy timing information about library cell (NOR, AND, XOR, etc.) to the design team we can improve a quality of timing analysis inside of ASIC design flow process. Also, this information could be very useful for semiconductor foundry team to make correction in technology process. By comparison of the propagation delay in the CMOS element and result of analog SPICE simulation, we can make assumptions about accuracy and quality of the transistor's parameters. Physical implementation of phase error accumulation method(PHEAM) can be easy integrated at the same chip as close as possible to the device under test(DUT). It was implemented as digital IP core for semiconductor manufacturing process($0.11{\mu}m$, GL130SB). Specialized method helps to observe the propagation time delay in one element of the standard-cell library with up-to picoseconds accuracy and less. Thus, the special useful solutions for VLSI schematic-to-parameters extraction (STPE), basic cell layout verification, design simulation and verification are announced.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.1
• /
• pp.40-50
• /
• 1994

Through the low orbit GPS satellite a 3-dimensional real time position detection can be achieved anywhere. Utilizing the GPS satellite detection values an analysis of the varing characteristics of the iono- sphere can be achicved, and by calculating the correlation relationship of the position detection error and the ionospheric time delay characteristics, an advanced algorithm technique can be developed. Computer simulation of the developed algorithm for defining the correlation between the position detec- tion error and the varing ionospheric time delay characteristics has been proceeded. The results of simulation reveal the fact that the varing characteristics of the ionosphere nearly match the actual ionospheric time delay characteristics.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.7
• /
• pp.45-51
• /
• 2009

We have presented a routing mechanism that selects a route by considering channel statuses in order to fast transfer delay-sensitive data in WSNs (Wireless Sensor Networks). The existing methods for real-time data transfer select a path whose latency is the shortest or the number of hops is the smallest. An algorithm to select a real-time transfer path based on link error rates according to the characteristic of wireless medium was also suggested. However, the propagation delay and retransmission timeout affected by link error rates are shorter than channel assessment time and backoff time. Therefore, the mechanism proposed in this paper estimated the time spent in using a clear channel and sending out a packet, which is based on channel backoff rates. A source node comes to select a route with the shortest end-to-end delay as a fast transfer path for real-time traffic, and sends data along the path chosen. We found that this proposed mechanism improves the speed of event-to-sink data transfer by performing experiments under different link error and channel backoff rates.