• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.173-181
• /
• 2014

The propagation behavior and structural variation of a premixed propane/air flame with frequency change in an ultrasonic standing wave at various equivalence ratios were experimentally investigated using Schlieren photography and pressure measurement. The propagating flame was observed in high-speed Schlieren images, allowing local flame velocities of the moving front to be analyzed in detail. The study reveals that the distorted flame front and horizontal splitting in the burnt zone are due to the ultrasonic standing wave. Vertical locations of the distortion and horizontal stripes are intimately dependent on the frequency of the ultrasonic standing wave. In addition, the propagation velocity of the flame front bounded by the standing wave is greater than that of the flame front without acoustic excitation. As expected, the influence of the ultrasonic standing wave on premixed-flame propagation becomes more prominent as the frequency increases.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.204-209
• /
• 2003

In an urban area telecommunication using wireless system, the accurate prediction and analysis of wave propagation characteristics are very important to determine the service area, optimized selection of base station, and cell design, etc. In the stage of these analyses, we have to present the propagation prediction model which is varied with the type of antenna, directional angle, and configuration of the ground in our urban area. In addition we need to perform an analysis of the conventional model which is similar to ours and dig out the parameters to evaluate the wave environment before the cell design for the selected area. In this paper, we propose a wave propagation prediction model concerning the topography and obstacles in our urban area. We extract the parameters and apply them to the proposed wave environment for the simulation analyzing the propagation characteristics. Throughout these analyzing procedure, we extracted the essential parameters such as the position of the base station, the height of topography, and adequate type and height of the antenna with our preferable correctness.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.201-207
• /
• 2009

Recently effective spectrum resource technologies have been studied using a game theorectical approach for cognitive radio networks. Radio resource management is required an effective scheme because the performance of a radio communication system much depends on it's effectiveness. In this paper, we suggest a game theoretical algorithm for adaptive power control which is required an effect scheme in cognitive radio networks. It will be a distributed network. In the network distributed cognitive radio secondary users require an adaptive power control. There are many results which are suggested some possibility of game theoretical approaches for communication resource sharing. However, we suggest a practical game algorithm to achieve Nash equilibrium of all secondary users using a Nash equilibrium theorem in this paper. Particularly, a game model was analyzed for adaptive power control of a cognitive radio network, which is involved in DSSS (Direct Sequence Spread Spectrum) techniques. In case of K=63 and N=12 in the DSSS network, the number of iteration was less than maximum 200 using the suggested algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2465-2471
• /
• 2012

For the steel structures those are used in harsh sea environments, corrosion fatigue is a challenging issue in connection with design life. In this research, in order to investigate the influence of cathodic overprotection on the corrosion fatigue crack propagation behavior, corrosion fatigue crack propagation test under the condition of -950mV vs SCE was conducted by using of high tensile TMCP steel plate and the relationships between da/dN-${\Delta}K$ were obtained. At this test, when ${\Delta}K$ is low, the crack propagation rates were accelerated compared to those of seawater condition, however, when ${\Delta}K$ is high, the crack propagation rates were lower than those of seawater condition. As the cause for the acceleration and deceleration of corrosion fatigue crack propagation rates under the condition of cathodic overprotection, the role of hydrogen and calcareous deposits are discussed.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.705-709
• /
• 2009

Based on experimental study of lycopodium dust particles' behavior, we suggest the flame propagation model through dust clouds. With dust concentration, flame velocity reaches a maximum value at $170g/m^3$ to exceed the stoichometric concentration for lycopodium-air mixture combustion and decreases slightly in the richer side of $500g/m^3$. At $47{\sim}200g/m^3$, mean velocity of particle increases in proportion to flame velocity. As the sum of burning rate and particle velocity is approximate in flame velocity, the flame propagation velocity with lycopodium dust concentration can be estimated by the calculation and it was found that behavior of particles is useful for better understanding of dust flame propagation velocity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1422-1432
• /
• 2011

Recently, wireless network has been playing an important role in communication system and the applications have become wider with its big technological leap. In defence sector, there are some attempts to use wireless networks to go beyond the wire system. Especially, most internal space of the warships have the wired communication system, which are complicated and inefficient. In this paper, we measure and make a channel model about the internal parts of the warship which contain compartments and corridors including many differences from general indoor environment for establishing wireless networks in warship's internal space. In the unique environment made of metal, we measure 2.4GHz signals using continuous wave(CW) and analysis the environment to present indoor path-loss model for comparing with results from the ray-tracing tool. Moreover, we draw the conclusion that the environment of warships has a wide difference from conventional environments and put the results to practical use in warship's internal space.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.147-174
• /
• 2010

This paper aims to analysis sectoral innovation patterns of technological innovation and localized knowledge spillover in Korean manufacturing sector. Sectoral innovation system approach proposed that the specific pattern of innovative activity and knowledge spillover in an industry can be explained as the outcome of different technological regimes. Technological regime is defined by the particular combination of technological opportunities, appropriability of innovations, cumulativeness of technical advances and properties of the knowledge base. Based on a sample of 2,882 firms in manufacturing sector, this paper provides empirical estimates of the relationships between firm's product innovation and localized knowledge spillover. Results of the analysis provide considerable support to the hypothesis that firm's product innovation and localized knowledge spillover are related to the nature of the underlying technological regime. In the industry based on the tacit and specific knowledge, firm's product innovation is positively related to the localized knowledge spillover. This paper also shows that high stability in the ranking of innovators are related to high degrees of cumulativeness and appropriability.

• Journal of the Korean Magnetics Society
• /
• v.19 no.2
• /
• pp.62-66
• /
• 2009

The soft magnetic FeSiCr were processed the ball-mill for 30 hours and the shape of FeSiCr particles was changed from sphere to flake type, which was observed using scanning electron microscope. The complex permittivity and permeability spectra and reflection loss of FeSiCr-rubber composite was measured using Network Analyzer in order to investigate the relationship between the microwave absorption and the material constants. The matching frequency shifted toward lower frequency range with microwave absorber thickness, and microwave absorber with FeSiCr-rubber composite showed a maxium reflection loss of -8.3 dB at 1.86 GHz for a 1.3 mm thickness.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.1003-1013
• /
• 2009

In the domestic environments, there are many tunnels since most of terrains have mountains. To ensure the quality of wireless network service in NLOS environment like tunnels which differ from indoor or outdoor wireless channels, researches on wave-propagation characteristics. through such channel are necessary. Especially, in such environment the ground repeater called Gap-Fillers are usually used for satellite mobile services. To make sure that mobile service using satellites in tunnels is available, the research about Gap Filling method is essential. This research is focus on the characterising the wave-propagation through tunnels, to find the appropriate frequency, HPBW of the Gap-Filler antennas, the number of Gap-Fillers, etc. In this paper, we present the effective Gap Filling method in tunnels for ISM band, based on analysis of ray tracing and measurement results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.379-388
• /
• 2020

The contents and scope of this study are to analyze the problems of the current radio service and radio station classification system, and to investigate the radio wave management cases in the United States to provide a reasonable and efficient radio wave management method. The results of this study can be used as basic data when revising the legal system regarding radio wave enforcement regulations, radio service and radio station classification standards. It is expected that in the future, a detailed commentary on the definition and classification system of new radio / radio stations will be prepared to increase policy compliance in practice, while contributing to enhancing the consistency and efficiency of radio station licensing and inspection.