• RED RIBBON
• /
• 통권1호
• /
• pp.26-29
• /
• 1994

에이즈의 전파는 사회 문화적 배경에 따라 다른 양상을 띄고 있으며, 전파의 유형은 물론 전파속도에도 이러한 속성은 지대한 영향을 미치고 있다.

• RED RIBBON
• /
• 통권48호
• /
• pp.14-15
• /
• 2002

외국인이 많이 상주하는 지역의 주민이 그곳에서 일어나는 폭력과 이로 인한 에이즈 전파를 우려하여 장문의 편지를 보내왔다. 지면이 부족하여 에이즈 전파 부분만 발췌하여 게재한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제24권6호
• /
• pp.637-643
• /
• 2011

The bond-based peridynamic model is able to capture many of the essential characteristics of dynamic brittle fracture observed in experiments: crack branching, crack-path instability, asymmetries of crack paths, successive branching, secondary cracking at right angles from existing crack surfaces, etc. In this paper we investigate the influence of the stress waves on the crack branching angle and the velocity profile. We observe that crack branching in peridynamics evolves as the phenomenology proposed by the experimental evidence: when a crack reaches a critical stage(macroscopically identified by its stress intensity factor) it splits into two or more branches, each propagating with the same speed as the parent crack, but with a much reduced process zone.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제16권8호
• /
• pp.842-847
• /
• 2005

In this paper, we fabricated sheet-type EM wave absorbers for mobile phones by using sendusts and tested EM wave absorption of it. The band-width of EM wave absorbers coated with $Al_2O_3$ were larger than non-coated EM wave absorbers. Particle size decreased with increasing milling time, which made the result of increasing of EM wave absorption. The fabricated EM wave absorbers show a reflection coefficient 17.4 dB at 946 MHz for a 4 mm sample and 5 dB at 1.8 GHz for a 1 mm sample.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.153-156
• /
• 2000

The remarkable progress of electronics and radio communications technology has made our life abundant. On the other hand, the countermeasure of EMC becomes more important socially according to the increased use of electromagnetic waves. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band from 30 MHz to 18 GHz in the bandwidth of EMI measurement. In this paper, we proposed the cutting com-shaped type satisfying the above requirments and carried out broadband design using the equivalent material constants method. Moreover, we have fabricated it and compared its characteristics with simulated one.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.17-22
• /
• 2004

We prepared EM wave absorbers by using recycled Ba and Sr ferrites for GHz frequency, and investigated the effects of carbon additions, thickness and preparation temperatures on their EM wave absorption properties. We clarified that it is very important to consider carbon amounts in Ba and Sr ferrites and preparation temperature for Ba and Sr ferrite EM wave absorbers with high quality. In this study, the developed a EM Wave absorber satisfying over 20 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제10권1호
• /
• pp.133-141
• /
• 1999

In this paper, we present an indoor propagation prediction model which is based on a three-dimensional ray-tracing technique. In this model, instead of considering all obstacles such as furnitures and fixtures, etc., only main obstacles to the propagation such as walls, ceiling and floors are modeled as slabs with finite thickness and conductivity, and the significant phenomena of propagation are considered, so we can calculate simply and predict accurately the propagation losses. The propagating rays are considered to be reflected and transmitted specularly at the boundaries of obstacles, and diffracted at edges. The reflection and transmission losses on flat obstacles are calculated by using ray tracing method, and the diffraction losses at edges are calculated by using the uniform theory of diffraction (UTD) for finite conductivity media. The results simulated for some cases by this propagation model good agree with the measured value of pathloss.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제30권6호
• /
• pp.452-466
• /
• 2019

As the spectrum demand increases, securing spectrum resources in a timely manner becomes necessary. This paper proposes a spectrum-band prioritization scheme for establishing an efficient spectrum-use policy. The criteria for spectrum-band prioritization are derived from articles of the Radio Waves Act, and a four-level matrix for priority evaluation is proposed, considering both demand urgency and supply ease. The prioritization processes and items to consider for measuring each criteria are also proposed in order to implement the proposed prioritization scheme. It is expected that the proposed scheme can help secure the spectrum in a timely manner, protect incumbent users properly, and promote new spectrum-based businesses.

• Journal of Navigation and Port Research
• /
• 제31권8호
• /
• pp.671-674
• /
• 2007

In this paper, the EM wave absorber was designed and fabricated for ETC system, because ETC system has some problems including signal error and system-to-system interference. We fabricated some samples in different composition ratio of MnZn-ferrite, Carbon and CPE, confirmed that optimum composition ratio of Mn2n-ferrite, Carbon, CPE was 40 : 15 : 45 wt%. Complex relative permittivity and complex relative permeability was calculated by the measured data. And absorption abilities were simulated according to different thickness of the EM wave absorbers using complex relative permittivity and permeability. The EM wave absorber was fabricated based on simulated data Simulated and measured values agree well. As a result, the developed EM wave absorber has a thickness of 3.38 mm and absorption ability over 20 dB at 5.8 GHz.

• Journal of Korea Multimedia Society
• /
• 제9권11호
• /
• pp.1410-1420
• /
• 2006

In this paper, a replica update propagation method for cost optimization of request forwarding in the Grid database is proposed,. In the Grid database, the data is replicated for performance and availability. In the case of data update, update information is forwarded to the neighbor nodes to synchronize with the others replicated data. There are two kinds of update propagation method that are the query based scheme and the log based scheme. And, only one of them is commonly used. But, because of dynamically changing environment through property of update query and processing condition, strategies that using one propagation method increases transmission cost in dynamic environment. In the proposed method, the three classes are defined from two cost models of query and log based scheme. And, cost functions and update propagation method is designed to select optimized update propagation scheme from these three classes. This paper shows a proposed method has an optimized performance through minimum transmission cost in dynamic processing environment.