• Title/Summary/Keyword: 전치왜곡기

Search Result 70, Processing Time 0.031 seconds

Design and Analysis of 4D-8PSK-TCM System Considering the Nonlinear HPA Environment (비선형 HPA 환경을 고려한 4D-8PSK-TCM 시스템의 설계 및 분석)

  • An, Changyoung;Ryu, Sang-Burm;Lee, Sang-Gyu;Ryu, Heung-Gyoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.29 no.4
    • /
    • pp.299-307
    • /
    • 2018
  • Considering a nonlinear high power amplifier(HPA) and a predistorter, we have designed a four-dimensional 8-ary phase shift keying trellis-coded modulation(4D-8PSK-TCM) system, which is recommended for X-band satellite communications. Subsequently, we have evaluated and analyzed the spectrum, constellation characteristics, and BER performance of the system. In satellite communications, owing to the limited power, nonlinear characteristics that determine the operating point of the HPA must be analyzed because the HPA consumes high power. We herein report the design of the 4D-8PSK-TCM system, with efficiencies of 2 and 2.25 bits/channel-symbol. The simulation results confirmed that a 0.35 roll-off value is effective, considering the low peak-to-average power ratio(PAPR) characteristic and the narrow occupation bandwidth of the spectrum. It also confirmed that approximately 15~20 dB of output backoff(OBO) value is required at the HPA when the predistorter is not used, and approximately 1 dB of the OBO value is required when the predistorter is used.

A Design of Predistortion Linearizer Using Second Harmonic Signals (2차 고조파 신호를 이용한 전치 왜곡 선형화기 설계)

  • Kim Sung-Yong;Kim Young
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.12 s.103
    • /
    • pp.1239-1245
    • /
    • 2005
  • In this paper, a new predistortion linearizer using second harmonic components feedforwarding is proposed. The harmonic generator of the proposed predistorter that consists of a small signal amplifier extracts second harmonic signals. A vector modulator that modulate fundamental signal with second harmonic signals, generates the inverse third order intermodulation distortion signals and controls amplitude/phase of them with modulation factors. As a result, this linearizer is suppressed IMD3 signals of power amplifier effectively. The test results show that the third order IMD of power amplifier is suppressed more than 20 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 5 dB for CDMA(IS-95) 4FA signals.

A Design of Predistorter for Controlling the Amplitude of Low-Frequency IM Signals (저주파 혼변조 신호의 크기 조절에 의한 전치 왜곡 선형화기 설계)

  • Jang Mi-Ae;Kim Young
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.1 s.104
    • /
    • pp.45-51
    • /
    • 2006
  • In this paper, a new predistortion linearizer for controlling the amplitude of low frequency intermodulation distortion signals is proposed. The low frequency intermodulation distortion(IMD) components are generated by harmonic generator. A vector modulator, modulate fundamental signal with low frequency IMD signals, generates predistortion IMD signals and controls amplitude and phase of them with modulation factors. As a result, this predistorter is suppressed IMD signals of power amplifier effectively. The predistortion linearizer has been manufactured to operate in cellular base-station transmitting band($869{\sim}894\;MHz$). The experimental results show that IMD3 of power amplifier are improved more than 20 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 10 dB for IS-95 CDMA IFA signals.

Improved 20Mb/s CMOS Optical Receiver for Digital Audio Interfaces (디지털 오디오 인터페이스용 개선된 20Mb/s CMOS 광수신기)

  • Yoo, Jae-Tack;Kim, Gil-Su
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.3 s.357
    • /
    • pp.6-11
    • /
    • 2007
  • This paper proposes CMOS optical receivers to reduce effective area and pulse width distortion (PWD) in high definition digital audio interfaces. To mitigate effective area and PWD, proposed receivers include a frans-impedance amplifier (TIA) with dual output and a level shifter with threshold convergence, respectively. Proposed circuits are fabricated using $0.25{\mu}m$ CMOS process and measured result demonstrated the effective area of $270\times120{\mu}m^2$ and PWD of ${\pm}3%$ for the receiver with a dual output TIA, and the effective area of $410\times140{\mu}m^2$ and PWD of ${\pm}2%$ for the receiver with a threshold convergence level shifter.

Linearity Improvement of Doherty Amplifier Using Analog Predistorter with Phase-Controlled Error Generator (위상조절 왜곡기발생기를 가진 아날로그 전치왜곡기를 이용한 Doherty Amplifier의 선형성 개선)

  • Lee, Yong-Sub;Jeong, Yoon-Ha
    • Proceedings of the IEEK Conference
    • /
    • 2006.06a
    • /
    • pp.211-212
    • /
    • 2006
  • This paper represents a Doherty amplifier with analog predistorter to improve the linearity of the Doherty amplifier while preserving the high efficiency. A $3^{rd}$-order predistorter cancels $5^{th}$-order intermodulation (IM5) as well as $3^{rd}$-order intermodulation (IM3) components by their same phase difference in the predistorter and Doherty amplifier. This is accomplished by independently controlling their phase by using the phase-controlled error generator in the predistorter. For experimental verification, a $3^{rd}$-order predistorter has been implemented and tested in a 180-W Doherty amplifier at the wide-band code division multiple access (WCDMA) band. The measured results show good performance with the predistortion Doherty amplifier.

  • PDF

New Analog Predistorter for Independent Control of IM3 Components (3차 상호변조왜곡성분의 독립적인 조절을 위한 새로운 전치왜곡기)

  • Lee, Yong-Sub;Lee, Mun-Woo;Jung, Sung-Woo;Jeong, Yoon-Ha
    • Proceedings of the IEEK Conference
    • /
    • 2007.07a
    • /
    • pp.159-160
    • /
    • 2007
  • Two analog predsitorters (PDs) using the mixing operation are proposed to compensate for the memory effects of the power amplifier and then significantly cancel IM3 components with the independent control of IM3 terms. In the first PD, IM3 terms are generated by using mixing operation of low frequency terms. In the second PD, the double mixing operation of the fundamental components is used. For a two-tone signal with 20-MHz tone spacing, the notable IM3 suppression is achieved over a whole output power range.

  • PDF

A Design of Predistortion HPA using Frequency Up-Conversion Mixing Operation (주파수 상향 변환을 이용한 전치왜곡 전력 증폭기 설계)

  • Jeong, Yong-Chae;Kim, Young;Kim, Chul-Dong
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.15 no.5
    • /
    • pp.480-485
    • /
    • 2004
  • In this paper, a new predistortion linearizing method using frequency up-conversion operation of mixer is proposed. This linearizing method doesn't require any additional signal sources in spite of frequency up-conversion mixing operation. This method extracts the 2nd low frequency intermodulation distortion signal from input signals and uses the extracted 2nd low frequency intermodulation distortion signal as mixing signal source. To show validation of the proposed predistortion method, we made K-PCS power amplifier. On 2-tone signals amplification process, the (C/I) ratio of amplifier is improved 26 ㏈ (@Po=22 ㏈m/tone), where two tones are 1.8544 ㎓ and 1.8556 ㎓, respectively. And (C/I) ratio is improved more than to 20 ㏈ for 17 ㏈ output signal dynamic range. On IS-95A CDMA 1FA amplification process, the improvements of adjacent channel power ratio(ACPR) are 10.8 ㏈ and 6.4 ㏈ at ${\pm}$885 ㎑ and ${\pm}$1.25 ㎒ offset points, respectively.

Design and Performance Evaluation of SSD (Simultaneous Single Band Duplex) System with HPA Nonlinearity (HPA 비선형 특성을 고려한 SSD(Simultaneous Single Band Duplex) 시스템의 설계와 성능 분석)

  • Keum, Hong-Sik;An, Changyoung;Ryu, Heung-Gyoon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.40 no.1
    • /
    • pp.23-31
    • /
    • 2015
  • In this paper, we design a SSD(simultaneous single band duplex) system using RF cancellation and digital cancellation. And then, we analyze performance of the SSD system using pre-distorter with HPA non-linearity. Also, we analyze digital cancellation performance of the SSD system using pre-distorter with HPA non-linearity. Additionally, digital cancellation cancels residual self-interference. In linear conditions, digital cancellation can cancel self-interference of 40dB. Therefore, the SSD system has good BER performance because most of self-interference is canceled. But, in HPA non-linearity conditions, digital cancellation cancels residual self-interference of 25dB. In this conditions, self-interference is greater than desired signal. Therefore, bit informations of distant station can not be received. But, we confirm that if the proposed system uses pre-distorter then bit information of distant station can be received by HPA non-linearity compensation. Also, we confirm that even though the proposed system uses pre-distorter, if HPA non-linearity increases then digital cancellation performance is degraded by imperfect compensation of HPA non-linerity.

Modulation and Pre-equalization Method to minimize time delay in Equalization Digital On-Channel Repeater (등화형 디지털 동일채널 중계기의 시간지연을 최소화하기 위한 변조 및 전치등화 방법)

  • Park Sung-Ik;Kim Heung-Mook;Seo Jae-Hyun;Eum Ho-Min;Lee Yong-Tae;Lee Jae-Young;Lee Soo-In
    • Journal of Broadcast Engineering
    • /
    • v.11 no.2 s.31
    • /
    • pp.229-241
    • /
    • 2006
  • In this paper we propose and analyze a novel modulation and pre-equalization method to minimize signal processing time delay for the Equalization Digital On-Channel Repeater (EDOCR) in ATSC (Advanced Television Systems Committee) terrestrial digital TV system. The proposed modulation method uses Equi-Ripple (ER) filter coefficients instead of conventional Square Root Raised Cosine (SRRC) after coefficients for VSB (Vestigial Side Bands) pulse shaping. And the proposed pre-equalization method calculates pre-equalizer filter coefficients by using baseband signal as reference signal and demodulated repeater output signal, then generates a new VSB pulse shaping filter coefficients by convolutioning ER filter coefficients and pre-equalizer filter coefficients. The newly generated pulse shaping filter does not have minimized time delay by adjusting the number of pre-taps of the filter, but also compensates linear distortions caused by ER filter and mask filter.

The Design of Predistortion Linearizer with Polar Function Generator for Cellular Band Using Even Order Harmonic Signals (2차 고조파 신호를 이용한 극 함수 발생기를 갖는 셀룰라 밴드용 전치 왜곡 선형화기 설계)

  • Kim, Ell-Kou;Jeon, Ki-Kyoung;Kim, Young;Kwon, Sang-Keun;Yoon, Young-Chul
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.11 s.114
    • /
    • pp.1050-1057
    • /
    • 2006
  • This paper proposes a new predistortion linearizer with amplitude modulator and PFG(Polar Function Generator) using second order harmonic signals. This linearizer consists of PFG that combine with in-phase and quadrature-phase of second harmonic signals and amplitude modulator in main path. The predistorted third order intermodulation distortion(IMD3) signals that are generated by amplitude modulator with fundamental and PFG signals, improve a amplifier nonlinear characteristics. The proposed linearizer and amplifier have been manufactured and tested to operate in cellular base-station transmitting band$(869\sim894MHz)$. The test results show that IMD3 can be removed by more than 22.5 dB in case of CW 2-tone signals ${\Delta}f=1$ MHz, and the adjacent channel power ratio(ACPR) also can be improved by more than 8.4 dB for CDMA IS-95 1FA signals.