• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.161-166
• /
• 2000

Classified handmade Korean paper which has been commonly used as the material for the paper cultural assets divide into four classes. We irradiated xenon arc lamp, which has almost the same spectrum distribution as natural sunlight, to test photo-induced of discoloration according to PEG molecular weight and concentration. So, we reach the followings. 1) Unbleached handmade Korean paper with PEG showed rapid decrease of brightness for 10 hours after photo-irradiation, regardless of molecular weight of PEG, but, after 10 hours, it showed gradual increase of brightness. From this, it proved that there was an effect of preventing discoloration of photo-irradiation. 2) Chemical bleached handmade Korean paper showed increase of brightness after 20 hours. Though time was delayed in increase of brightness, there was also an effect of preventing discoloration of photo-irradiation in chemical bleached paper. 3) Handmade Korean paper made with abet-mosk showed the lowest of brightness when it was tested on 400-20% PEG. Before photo-irradiation, the brightness of paper, applied it, was the lowest, but it showed the least difference of brightness after photo-irradiation. From this, it proved that there was the greatest effect of preventing discoloration in this paper. 4) Preventing yellowish, the first phenomena by photo-irradiation ageing with applying PEG was proved that there was the decrease of value of $b^*$ +, and increase value of $L^*$, which could fairly prevent decrease of brightness.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1480-1486
• /
• 2011

After installation of platform screen door (PSD) in subway stations, particulate matters (PMs), which are originally ventilated through the platform, are accumulated inside the tunnel of the subway system. It deteriorates an air quality inside the tunnel. To ventilate the accumulated PMs inside the tunnel, the natural ventilator which are located inside the tunnel (namely, tunnel ventilation system) are used as only one circulation system. In addition, the installation of PSD can affect to the aerodynamic variations inside the tunnel, since the PSD system was not considered factor when the tunnel ventilation system was designed. However, the researches about the tunnel ventilation system have not been adequate. Therefore, this study is carried out with two objectives: 1) to measure the velocity of air current by the train-induced wind, when the train passes through the tunnel, and 2) to investigate the typical patterns of air current by quantitatively evaluating the characteristics of inflow/outflow of air current which passes through the natural ventilation system. This study can suggest the basic standard to newly design the tunnel of the subway system as well as the ventilation system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11A
• /
• pp.912-923
• /
• 2011

In this paper, we propose a routing protocol for WMNs to provide passengers in public transportation vehicles (e.g., bus and tram) with Internet access service. In order to support end users with a reliable Internet connection despite the mobility of vehicles, we assume that mesh router, called mobile mesh router (MMR), is installed in a vehicle and manages a route to Internet Gateway (IGW). We therefore propose an efficient routing protocol and its routing metric, called ETT-TR, considering trajectory information of vehicle as well as link quality in order to find a route between them. Using NS-2 simulations, we observe that our proposed routing protocol reduces the end-to-end delay and improves throughput performance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.355-365
• /
• 1991

New definition for the interaction of flames is introduced and interacting turbulent diffusion flames issuing from two rectangular nozzles are investigated on the basis of the definition. Theoretical study through numerical model is carried out and experiment for validation is conducted. The characteristics of interaction due to the variation of major parameters such as nozzle spacing, Reynolds number and nozzle aspect ratio are studied. Results show that strong interaction occurs for small nozzle spacing, small Reynolds number and large aspect ratio. In order of their magnitude, the intensity of interactions on the individual transport mechanism is momentum, heat and mass. It is also found that interaction makes flames longer, tilted and finally merged. Increase of velocities and temperature, decrease of oxygen concentration and depression of turbulence are occurred in the region between flames.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.214-220
• /
• 2008

세계적인 화석연료사용의 급증으로 인해 지구온난화와 자원고갈의 문제가 크게 대두되어지고 있다. 이를 해결하기 위해 많은 국가와 연구기관이 재생 가능한 에너지로서 바이오연료의 개발과 사용에 관심을 기울이고 있다. 바이오에탄올은 자동차용 휘발유와 혼합하여 사용할 수 있는 연료로서 많은 국가에서 상용화하고 있다. 우리 연구그룹은 혼합비율에 따른 자동차용 휘발유의 품질특성시험(상분리 모사실험, 금속류 부식실험, 고무류 침지실험 등)을 한 결과 국내 최적의 혼합량(E3, E5)을 도출하였다. 이로부터 현재 전국 4개 시범주유소를 운영하면서 바이오에탄올 실증평가를 수행 중에 있다. 본 논문에서는 바이오에탄올 혼합연료유 도입을 위한 실증평가 연구를 통해 국내 바이오에탄올의 도입 활성화 가능성과 최적의 유통인프라 구축방안에 대해 논의하고자 한다.

• New & Renewable Energy
• /
• v.3 no.4
• /
• pp.98-103
• /
• 2007

국제 원유가의 지속적인 상승에 따라 화석연료 고갈을 대비한 대체에너지 및 온실가스배출 감소를 위하여 바이오연료의 시용 및 상용보급은 전세계적인 추세이다. 우리나라의 경우 바이오디젤은 2002년부터 시범보급사업(Demonstration & disseminatio을 거쳐 2000년 7월부터 전국주유소를 통하여 경유 중에 바이오디젤 0.5%를 혼합한 BD0.5를 수송용 연료로 도입하여 아시아 최초로 상용보급화를 시행하고 있다. 또한 휘발유 중 바이오에탄올 혼합 연료유 도입을 위한 실증평가연구를 2006년 8월부터 2008년 7월까지 수행중이다. 자동차용 휘발유의 옥탄가 향상을 위해 함산소 기재로 사용되는 MTBE(Methyl Tertiary Butyl Ether)를 바이오에탄올로 대체한 바이오에탄올 혼합연료유는 수분 혼입에 의한 상 분리(Phase separation)와 금속에 대한 부식성 문제를 야기 시킬 수 있다. 바이오에탄올을 서브옥란가솔린(Sub-octane gasoline)에 혼합하여 상 분리 모사실험, 금속류 부식시험, 고무류 침지실험 등 다양한 품질특성평가를 수행하였으며, 이런 결과들을 바탕으로 국내실정에 알맞은 최적의 혼합량(E3, E5)을 도출하였다. 또한 전국에 4개 시범주유소를 운영하여 바이오에탄올 혼합 연료유의 유통 및 보급을 통해 최적의 유통인프라(Distribution infrastructure) 보완 및 구축 방안을 도출 하고자 한다.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.139-146
• /
• 2010

In this study, a new equivalent modeling technique of rollingstock for 1-D collision dynamics was proposed using crash analysis of 3-D finite element model in some detail. To obtain good simulation results of 1-D dynamic model, the force-deformation curves of crushable structures should be well modelled with crash analysis of 3-D finite element model. Up to now, the force-deformation curves of the crushable structures have been extracted from crash analyses of sectionally partitioned parts of the carbody, and integrated into 1-D dynamic model. However, the results of the 1-D model were not satisfactory in terms of crash accelerations. To improve this problem, the force-deformation curves of the crushable structures were extracted from collision analysis of a simplified train consist in this study. A comparative study applying the suggested technique shows in good agreements in simulation results between two models for KHST.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.355-367
• /
• 2017

The decommissioning of Kori unit 1, which was permanently shut down in June of 2017, will be the first instance of the dismantling of a commercial nuclear power plant in Korea. The disposal of waste during the dismantling process accounts for a large part of the total decommissioning cost. Therefore, structures consisting of activated and contaminated concrete must be economically and safely dismantled by establishing a proper dismantling strategy. This study focuses on optimized dismantling and disposal scenarios pertaining to a biological shield. Several dismantling cases, regulations and technologies related to waste treatment as these practices pertain to nuclear power plants are analyzed. To minimize the amount of waste from the biological shield dismantling process, an optimized dismantling scenario is presented and disposal alternatives for dismantled concrete waste are proposed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.649-653
• /
• 2007

국제 원유가의 지속적인 상승에 따라 화석연료 고갈을 대비한 대체에너지 빛 온실가스배출감소를 위하여 바이오연료의 사용 및 상용보급은 전세계적인 추세이다. 우리나라의 경우 바이오디젤은 2002년부터 시범보급사업(Demonstration & dissemination)을 거쳐 2006년 7월부터 전국주유소를 통하여 경유 중에 바이오디젤 0.5%를 혼합한 BDO.5를 수송용 연료로 도입하여 아시아 최초로 상용보급화를 시행하고 있다. 또한 휘발유 중 바이오에탄올 혼합 연료유 도입을 위한 실증평가연구를 2006년 8월부터 2008년 7월까지 수행중이다. 자동차용 휘발유의 옥탄가 향상을 위해 함산소 기재로 사용되는 MTBE(Methyl Tertiary Butyl Ether)를 바이오에탄올로 대체한 바이오에탄올 혼합연료유는 수분 혼입에 의한 상 분리(Phase separation)와 금속에 대한 부식성 문제를 야기 시킬 수 있다. 바이오에탄올을 서브옥탄가솔린(Sub-octane gasoline)에 혼합하여 상 분리 모사실험, 금속류 부식시험, 고무류 침지실험 등 다양한 품질특성평가를 수행하였으며, 이런 결과들을 바탕으로 국내실정에 알맞은 최적의 혼합량(E3, E5)을 도출하였다. 또한 전국에 4개 시범주유소를 운영하여 바이오에탄올 혼합 연료유의 유통 및 보급을 통해 최적의 유통인프라(Distribution infrastructure) 보완 및 구축 방안을 도출 하고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.54-60
• /
• 2003

Feeding traction loads from the public power system may lead to some current and voltage unbalance and consequently affects the operation of its energy-supply system and other equipment connected with it. This paper introduces an analysis of the current unbalance caused by the demands of an electric railway on a public power system. And the results with compensator and without compensator are simulated, and eventually the formula about the current unbalance is suggested. The Scott-connected transformer is adopted in Korea National Railway System. So Scott-connected transformer among the various transformer connection schemes is analyzed in this paper. Also, the formulas about the unbalance and compensating current can be derived by using two parameters(M-phase and T-phase current) of secondary Scott-connected transformer. So, the practical and accurate simulation can be done through dynamic models by using scheduling of traction.