• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.711-717
• /
• 2017

The railway is a public transportation system that provides large-scale passenger transportation and service, whose reliability and safety is the top priority. The wiring of railway vehicles is classified into train control lines (train lines) and communication lines. The train lines are used for input / output signals related to vehicle driving and safety functions, and the communication lines are used for the input / output signals for passenger services such as broadcasting. In order to measure the reliability of railway vehicles, a train line is applied to the input / output interface of the control signals between the electric control devices in the vehicle, and there are many electromechanical devices such as relays and contactors for the control logic. In fact, since the vehicle control circuit is composed of several thousand contacts, it is difficult to check for errors such as contact failure, and it is impossible to check the real-time status, so a lot of manpower and time is required for regular maintenance. Therefore, we analyze the current state of the train line design of the electric equipment used for driving and services in domestic railway cars and propose three wiring reduction methods to improve it. Based on the analysis of domestic electric vehicles, it was confirmed that the wiring reduction effect is 35% or more.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.638-641
• /
• 1997

This paper describes the electrical design, characteristic and test results of both VVVF Inverter system and a auxiliary power supply system for UTM-01. As the propulsion system for SLIMs, GTO type VVVF inverter is used. IGBT 3 level inverter is adopt in Auxiliary Power Supply system. The control of two systems is fully digitalized by DSP TMS320C31. So a performance of two systems is more improved.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.628-631
• /
• 2009

본 논문에서는 당사인 경신공업(주)와 스미토모전장(주)와의 기술제휴를 통한 신제품 개발 프로젝트를 통하여 진행 한 연구 내용이다. 현재 자동차의 주요 부품 중 하나인 Dash-Grommet는 실외에서 실내부로 직부되는 부분으로 방수성이 주요한 성능이다. 이에 따라 현재 방수성 향상을 위해 볼팅으로 씰링을 하는 구조로서 브라켓트를 적용하고 있으며, 볼팅 툴 사용에 따른 홀 위치가 센터로 이동함에 따라 와이어 하네스 성형성을 위해 프로텍터를 적용하고 있다. 이와 관련하여 작업자의 툴 사용에 따른 산업재해(근골격계)요인 및 원가 상승의 원인이 되고 있다. 이에 본 연구에서는 그로멧 씰링구조를 최적화하여 브라켓트를 삭제시키고, 인간 공학적 구조 검토를 통한 저삽입력 구조의 Dash-Grommet 개발에 그 목적을 두었다. 그로멧 3중 씰링 구조를 이용하여 주요 성능인 방수(침수/살수) 성능에 대한 문제를 해결하였으며, 내부 파이프 구조를 이용하여 와이어를 통한 수분 유입에 대한 수밀 대책이 마련 되도록 하였다. 또한, 돌기부 구조를 이용하여 차량 장착시 판넬 접촉면을 최소화 함으로써 실제차량 장착 작업시 저삽입력을 가능하게 하였으며, 이와 더불어 홈부 구조를 이용하여 차량 장착시 그로멧의 수축을 용이하게 함으로써 새로운 그로멧 삽입 메커니즘을 구현하여 기존 대비 40~50%의 저 삽입력 그로멧을 개발할 수 있었다.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.1-7
• /
• 2022

Recently, satellites equipped with high-performance electronics have required higher power consumption because of the advancement of satellite missions. For this reason, the size of the solar panel is gradually increasing to meet the required power budget. Increasing the size and weight of the solar panel is one of the factors that induce the elastic vibration of the flexible solar panel during the highly agile maneuvering of the satellite or the mode of vibration coupling to the satellite or the mode of vibration coupling to the micro-jitter from the on-board appendages. Previously, an additional damper system was applied to reduce the elastic vibration of the solar panel, but the increase in size and mass of system was inevitable. In this study, to overcome the abovementioned limitations, we proposed a high -damping yoke structure consisting of a superplastic SMA(Shape Memory Alloy) laminating a thin FR4 layer with viscoelastic tape on both sides. Therefore, this advantage contributes to system simplicity by reducing vibrations with small volume and mass without additional system. The effectiveness of the proposed superelastic SMA multilayer solar panel yoke was validated through free vibration testing and temperature testing using a solar panel dummy.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.1-12
• /
• 2023

In the current era of the global mobile smart device revolution, electronic devices are required in all spaces that people interact with. The establishment of the internet of things (IoT) among smart devices has been recognized as a crucial objective to advance towards creating a comfortable and sustainable future society. In-mold electronic (IME) processes have gained significant industrial significance due to their ability to utilize conventional high-volume methods, which involve printing functional inks on 2D substrates, thermoforming them into 3D shapes, and injection-molded, manufacturing low-cost, lightweight, and functional components or devices. In this article, we provide an overview of IME and its latest advances in application. We review biomimetic nanomaterials for constructing self-supporting biosensor electronic materials on the body, energy storage devices, self-powered devices, and bio-monitoring technology from the perspective of in-mold electronic devices. We anticipate that IME device technology will play a critical role in establishing a human-machine interface (HMI) by converging with the rapidly growing flexible printed electronics technology, which is an integral component of the fourth industrial revolution.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.241-249
• /
• 2018

The military purpose vehicles are developed by using the platform of civil vehicles according to the commercial vehicle expansion plan and military supplied product commercialization policy. But the information related to the military purpose vehicle which adopts the same platform with the civil vehicle is forced to be exposed because its information is revealed by containing into the maintenance manual and electric circuit diagram. Especially, the information disclosure should be blocked by reviewing the application of technology protection because the military vehicle becomes combating purposed mixed equipment when the missile and radar are mounted. The mixed equipment means the one configured with more than 2 types of equipment, and it is categorized into the main and sub equipment. This study was performed to derive the problems in Korean system for vehicle part test evaluation on the mixed equipment and the defense industry technology protection system, and to derive the methods for improving through interviews with the specialists. The conflicts between the civil laws and army regulation were reduced by adding a clause that the engine reflected with the newest emission gas standard should be mounted based on the time of force integration, and the commercialized military supplies were designated as element technology of defense industry technology in consideration of its roles and functions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.698-705
• /
• 2010

A vehicle antenna for AM, FM, TDMB, GPS systems was designed and implemented. Omnidirectional AM antenna was designed by ferrite turn style antenna. For the FM and TDMB antenna, folded monopole antenna which helical is folded was applied. GPS antenna for the bandwidth achievement was designed by trapezoidal microstrip patch that has air substrate. Receiving signal strengths by the measurement were presented for the AM, FM and TDMB antenna. AM signal strength was -65.7 dBm, this strength is almost as same conventional pole antenna as -63.4 dBm. It can be replaced conventional pole or glass antenna by the studied antenna. Signal strengths for FM and TDMB were -55.66 and -43.50 dBm at center frequency, they are 5~10 dB higher than conventional antenna. Measurements of bandwidth and gain for the GPS antenna showed 135 MHz under VSWR 2 : 1 and 4.31 dBi, gains over GPS band were 3~5 dB higher than ceramic patch antenna.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.352-359
• /
• 2005

Uncertainty involved during determination of vitamin C content in infant formula was quantified by indophenol titration method. Uncertainty sources in measurand, such as purity, weight, final volume of standard, volume of standard solution used for titration, sample weight, final volume of sample, extraction solution used for titration, titration of extraction solution and standard solution by indophenol solution were identified and used as parameters for combined standard uncertainty based on Guide to the expression of uncertainty in measurement (GUM) and Draft EURACHEM/CITAC Guide. Uncertainty parameters of each source in measurand were identified as resolution, reproducibility and stability of chemical balance, standard material purity, repeatability, reproducibility, end point of titration, 1 mL pipet, 5 mL autopipet, and 100 mL mass flask. Each uncertainty component was evaluated by types A and B and included to calculate combined uncertainty. Analytical test result for traceability under laboratorial conditions using Certified Reference Material (CRM) test was certified as $108.4{\pm}1.7mg/100g$, which was within CRM certification range of $114.6{\pm}6.6mg/100g$. Uncertainty test result of vitamin C content of 5 g sampling was $56.7{\pm}2.44mg/100g$. Uncertainty could be reduced by identification of uncertainty sources and components related with vitamin C determination by indophenol titration method and by decreasing uncertainty sources and components.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.332-345
• /
• 2011

As weapon systems are evolving into more advanced and complex ones, the role of the software is becoming heavily significant in their developments. Particularly in the war field of today as represented by the network centric warfare(NCW), the reliability of weapon systems is definitely crucial. In this context, it is inevitable to develop software reliably enough to make the weapon systems operate robustly in the combat field. The reliability engineering activities performed to develop software in the domestic area seem to be limited to the software reliability estimations for some projects. To ensure that the target reliability of software be maintained through the system's development period, a more systematic approach to performing software reliability engineering activities are necessary from the beginning of the development period. In this paper, we consider the software reliability in terms of the development of a weapon system as a whole. Thus, from the systems engineering point of view, we analyze the models and methods that are related to software reliability and a variety of associated activities. As a result, a process is developed, which can be called the software reliability engineering process for weapon systems (SREP-WS), The developed SREP-WS can be used in the development of a weapon system to meet a target reliability throughout its life-cycle. Based on the SREP-WS, the software reliability could also be managed quantitatively.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.3
• /
• pp.261-270
• /
• 2019

With the advent of the Fourth Industrial Revolution, multi-variety production in the up-to-date manufacturing environment is proceeding more rapidly whereby production planning and management have been getting more complicated. Moreover, the need to improve production efficiency through effective operation sequencing is further heightened. Fundamentally, the effective operation sequencing can reduce the set-up of the equipment, efficiently utilize the equipment, shorten the set-up time, and ultimately contribute to productivity improvement. This study deals with the problem of efficient operation sequencing in a situation where a single machine performs multiple operations. The complexity of the problem is very high when compared to the case where only one operation is performed on one machine, which is covered in most existing studies. In this paper, we propose an integer programming model to minimize the number of setups. This study aims at minimizing the number of mold replacement times in the process of processing a given production order for the wiring harness manufacturing process, which is one of the components of automobile electric field. In addition, brief case studies are presented to verify the validity of the proposed mathematical model.