• Title/Summary/Keyword: 전자 전달

Search Result 2,175, Processing Time 0.037 seconds

Hospital Medicine Delivery System Design applied RFID (전자태그(RFID)를 적용한 병원 약물전달 시스템 설계(HMDS))

  • Lim Keun;Ju Jin-Sun;Lee Hye-Sun
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2006.05a
    • /
    • pp.581-584
    • /
    • 2006
  • 병원에서는 RFID를 적용하여 병원종사자의 동선관리 및 의료 장비 등의 활용성을 개선함으로서 의료환경에 많은 변화가 일어나고 있으며 의료 서비스 향상에 크게 기여하고 있다. 그러나 의료 서비스에 앞서 더욱 중요한 의료 안전분야 에서는 여러 문제점 등이 내재되어 있다. 감염된 혈액의 수혈사고, 수술환자의 이동사고, 약물전달사고 등이 있다. 이러한 문제는 의료서비스 향상에도 불구하고, 의료 안전에 대한 부분이 상대적으로 배재되기 때문에 나타나는 것으로 판단된다. 본 논문에서는 특히 약물전달에 RFID를 적용하여 약물 전달사고를 최소화 하고자 한다.

  • PDF

액체추진기관의 복사열전달 분석

  • Ahn, Won-Geun;Park, Hee-Ho;Hwang, Su-Kwon;Kim, Yoo
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2002.04a
    • /
    • pp.2-3
    • /
    • 2002
  • 일반적으로 연소과정에서 발생한 고온고압의 연소가스로 인하여 액체추진기관의 연소실 및 노즐 벽면 그리고 추진기관 후방부위에 대류열전달(Convective heat transfer)과 복사열전달(Thermal radiative heat transfer)이 발생하는 것으로 알려져 있으며, 액체추진기관에서 발생하는 복사열전달 현상은 재생냉각장치의 열입력량 예측 및 발사체의 추진기관 후방부위에 탑재되는 전자장이 및 구조물의 열적환경(Thermal environmental phenomena)을 분석하는데 매우 중요하다. 이에 본 연구에서는 노즐 후방부위에서 발생하는 복사열전달량(Radiative heat transfer rate)을 측정하고 연소압(Chamber pressure)과 혼합비(Mixture ratio)에 따른 영향을 파악하였다.

  • PDF

SMX-1 신호링크기능 S/W설계 및 구현

  • Lee, Geun-U;Baek, Yeong-Sik
    • ETRI Journal
    • /
    • v.14 no.4
    • /
    • pp.236-248
    • /
    • 1992
  • 본 고에서는 국내 신호망에 사용될 NO.7 신호방식을 채택한 신호중계교환기 SMX-1 시스팀의 메시지전달부(MTP)중 레벨2 신호링크 기능에 대한 소프트웨어의 설계 및 구현에 대하여 기술하였다. SMX-1 시스팀내에서 요구하는 레벨2 신호링크의 기능은 NO.7 신호방식-메시지전달부 국내기준안에서 제시한 신호링크 고유기능, 고신뢰도가 만족되도록 설계된 SMX-1 시스팀의 유지보수기능, SMX-1 시스팀 운용시 망상태 파악 및 가용도 등을 파악하기 위해 필요한 측정 및 감시 기능들이 구현되었다. 또한 신호링크 고유기능중에서도 설계자 구현 의존 사항들인 신호 전송로 차단때의 감지 기능, 신호링크 폭주 기능, 옥텟계수 모드 처리기능, 긴 메시지 수신처리 기능 등이 구현되었다. 구현 완료된 신호링크기능이 NO.7 신호방식-메시지전달부 국내기준안에서 요구하는 메시지전달부 신호전송성능의 신호트래픽 처리용량을 만족하는지를 확인하기 위하여 NO.7 프로토콜 분석기를 통하여 시험하였으며 그 결과를 분석 및 기술하였다.

  • PDF

Effect of Terephthalaldehyde to Facilitate Electron Transfer in Heme-mimic Catalyst and Its Use in Membraneless Hydrogen Peroxide Fuel Cell (테레프탈알데하이드의 전자전달 강화효과에 따른 헴 단백질 모방 촉매의 성능 향상 및 이를 이용한 비분리막형 과산화수소 연료전지)

  • Jeon, Sieun;An, Heeyeon;Chung, Yongjin
    • Korean Chemical Engineering Research
    • /
    • v.60 no.4
    • /
    • pp.588-593
    • /
    • 2022
  • Terephthalaldehyde (TPA) is introduced as a cross liker to enhance electron transfer of hemin-based cathodic catalyst consisting of polyethyleneimine (PEI), carbon nanotube (CNT) for hydrogen peroxide reduction reaction (HPRR). In the cyclic voltammetry (CV) test with 10 mM H2O2 in phosphate buffer solution (pH 7.4), the current density for HPRR of the suggested catalyst (CNT/PEI/hemin/PEI/TPA) shows 0.2813 mA cm-2 (at 0.2 V vs. Ag/AgCl), which is 2.43 and 1.87 times of non-cross-linked (CNT/PEI/hemin/PEI) and conventional cross liker (glutaraldehyde, GA) used catalyst (CNT/PEI/hemin/PEI/GA), respectively. In the case of onset potential for HPRR, that of CNT/PEI/hemin/PEI/TPA is observed at 0.544 V, while those of CNT/PEI/hemin/PEI and CNT/PEI/hemin/PEI/GA are 0.511 and 0.471 V, respectively. These results indicate that TPA plays a role in facilitating electron transfer between the electrodes and substrates due to the π-conjugated cross-linking bonds, whereas conventional GA cross-linker increases the overpotential by interrupting electron and mass transfer. Electrochemical impedance spectroscopy (EIS) results also display the same tendency. The charge transfer resistance (Rct) of CNT/PEI/hemin/PEI/TPA decreases about 6.2% from that of CNT/PEI/hemin/PEI, while CNT/PEI/hemin/PEI/GA shows the highest Rct. The polarization curve using each catalyst also supports the superiority of TPA cross liker. The maximum power density of CNT/PEI/hemin/PEI/TPA (36.34±1.41 μWcm-2) is significantly higher than those of CNT/PEI/hemin/PEI (27.87±0.95 μWcm-2) and CNT/PEI/hemin/PEI/GA (25.57±1.32 μWcm-2), demonstrating again that the cathode using TPA has the best performance in HPRR.

An Implementation of Smart Network for High-Quality Media Contents Delivery (고품질 미디어 콘텐츠 전달을 위한 스마트 네트워크 구현)

  • Park, Choon-Gul;Lee, Young-Seok;Joo, Young-Do
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.8 no.1
    • /
    • pp.85-91
    • /
    • 2013
  • Recently, the weight of high-quality multimedia contents is explosively growing out of the network total traffic. This steep increase of media contents to require huge traffic does not contribute to the generation of revenue streams and it leads to the situation of dumb pipe to trouble network providers into the big burden of investment on the network expansion. Accordingly, the transfer to the smart network to enable the effective delivery of large-scale media is imminently challenging issue to the network providers to seek the profitable business. The smart network revolves around the technologies to enhance end-to-end quality and fair usage with network resources and to optimize the traffic for the contents delivery over the concept of Content-Centric Network. In this paper, we propose an architecture and fundamental functions suitable for the smart network and suggest improved test results through the construction of an experimental network.