• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.63-73
• /
• 1993

In this paper, fuzzy control algorithm for the speed ratio control of the electro-hydraulic rig type continuously variable transmission(CVT) was proposed and the CVT performance tests were carried out for the optimal operation of the engine simulator. The experimental results for the constant throttle and the acceleration modes showed that the engine can be run on the optimum operating line, representing the power and economy mode, by the fuzzy control of the CVT speed ratio. Comparing the PID control with the fuzzy control, it was found that the fuzzy control showed better performance with the faster rising time and smaller steady state error. The result of this study can be used as basic design materials for developing the transmission control unit of the CVT.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.4
• /
• pp.288-294
• /
• 2001

In this study, a new PWM method considering the actuation delay of high speed solenoid valves is proposed to improve the response characteristics of electro hydraulic servo systems controlled by high speed solenoid valves. In addition, the decision method for the system gain, the basic period of PWM, and the sampling time is proposed, Since the conventional system controlled by high speed solenoid valves is too slow to apply this method, a high speed driving circuit(Quick-Drive) which enables rapid switching of the high speed solenoid valve at a high speed sampling mode is applied to realize this method. The experimental result shows that it is possible to achieve precision and quiet control without occurrence of limit cycle and wide range dead band.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.83-90
• /
• 1999

The prevalence of microprocessor-based controllers in automotive system has greatly increased the need for tools which can be used to validate and test control system over their full range of operation. The objective of this paper is to develop a real time simulator of an anti-lock braking system and traction control system by the methodology of using hardware-in-the-loop simulation based on a personal computer. By use of this simulator, the analyses of commercial electronic control units and components for ABS/TCS were performed successfully. The simulator of this research can be applied to development of more advanced control system(such as vehicle dynamic control system) and other automotive system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.192-201
• /
• 1997

The feedback control scheme of the pressure control system of the rear wheel steering gear which has relatively large volume and sprung load was built up in order to improve th response characteristic of the system. The control algorithm chosen was a feedback compensator joined by a feedfoward compensator and the model matching method was used in the process of control system design. The structures and properties of the reference models were inspected and the parameters of the controller were decided. The improvement of the response characteristic of the pressure control valve by means of the feedback control is affirmed. Particularly, when the order of the system model is higher than the 2nd order, the effectiveness of the feedback control on the improvement of the response characteristic of the valve is distinct. And the convenience of the model matching method is the process of control system design is confirmed as well.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.968-969
• /
• 2006

환경 친화적인 자동차, 안전한 자동차, 편리하고 편안한 자동차 등에 대한 다양한 요구에 효과적으로 대응하기 위해 기존의 기계/유압식 자동차 부품들을 전기장치로 대체하기 위한 연구가 꾸준히 진행되고 있으며, 특히 반도체 기술의 발전에 의한 가격경쟁력 강화에 힘입어 신규부품 개발 분야를 중심으로 자동차 부품의 전기/전자화가 급격히 진행되고 있다. 이에 따라 자동차에서 사용되는 전기에너지의 소요도 지속적으로 증가하여 새로운 차량용 전원체계에 대한 연구, 개발의 필요성이 대두되었고, 1990년대 중반 미국의 MIT/Industry Consortium 등을 중심으로 선행연구가 진행되어 자동차용 42V 전원체계가 새로운 대안으로 제시되었으며, 아울러 연비개선을 위한 마일드 하이브리드 기능의 채용이 검토되었다. 본 논문에서는 42V 전원체계 및 마일드 하이브리드 시스템 성능 구현에 핵심적인 역할을 하는 에너지 저장시스템에 관해 소개하고, 마일드 하이브리드 운용에 적합한 에너지 관리장치 개발에 대해 간략히 소개하고자 한다.

• 기계와재료
• /
• v.25 no.3
• /
• pp.40-53
• /
• 2013

본 고에서는 산업용 제어장치로 그 응용범위가 확장되고 있는 서보시스템의 기술발전과정과 전동력 출력용량을 기준으로 적용가능 한 산업분야를 도시했고 시장으로부터 서보시스템에 요구되는 내용과 이에 대응하는 기술개발방향을 설명하였다. 관련기술 발전추이 코너를 통해 단위 자동화시스템을 구성하는 요소 주제인 서보드라이브, 영구자석모터 및 정밀센서분야의 기술발전 동향을 설명하였으며, 특히 대용량형 영구자석모터 개발과정에서 요구되는 기술상의 특징을 정리했고, 세부 설계기술인 전자기해석, 구조설계, 발열억제 및 시험평가분야에 대해 설명과 적용 사례를 나타냈다. 사출성형기를 대상으로 대형 서보모터의 실증사례를 보였고 유압하이브리드 방식과의 차별성을 소개했다. 향후 서보모터와 드라이브에 있어서의 기술 발전 방향에 대해 간략히 기술하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.236-243
• /
• 1999

This study deals with the application of high speed on-off valves to an electro-hydraulic servo indexing system incorporated electro-hydraulic servo valces. Comparing with the electro-hydraulic servo valve the high speed on-off valve has some merits. Which included low price robustness to the oil contamination and dircect control without D/A converter. The considered sys-tem of this study is controlled by pulse width modulation(PWM) of the control law which is pro-duced by a PID controller which is used broadly in industrial equipments. The dynamic character-istics corresponding to variations of system parameters such as inertia moment system gain and supply pressure are investigated by computer simulation and experiment. Consequently the availability of the application of high speed on-off valve to servo indexing system instead of electro-hydraulic servo valve is confirmed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.550-552
• /
• 2014

차량 내부 네트워크는 LIN, CAN, FlexRay와 같은 제어 네트워크와 MOST와 같은 멀티미디어 네트워크가 있으며 이 내부 네트워크와 연결해 서비스를 사용하는 RF 통신으로는 대표적으로 블루투스, GSM, NFC가 있다. 그러나 능동 안전 시스템과 같은 지능형 기술의 지속적인 도입과 기계, 유압식 기기의 전자화에 따른 네트워크상의 통신량이 급격히 증가하면서 네트워크의 규모 및 통신 복잡도 등이 증가하고 있다. 따라서 차량 내/외부 네트워크의 최적화, 최소화 문제가 반드시 해결되어야하는 문제로 떠오르고 있다. 또한 이러한 통신환경이 갖추어진 이후에도 무선통신 기술의 성능향상 및 통신기술과 응용 서비스 분야와의 연계, 그리고 통신서비스를 위한 사업 모델 개발이 요구되는 등 앞으로 해결 해야하는 문제는 여전히 많이 남아 있다고 할 수 있다. 본 논문에서는 지능형 자동차의 RF 통신서비스에서 발생할 수 있는 지능형자동차의 보안위협 요소를 분석하고자 한다.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.3
• /
• pp.10-15
• /
• 2009

The major system of an agricultural power-shift tractor is the transmission, using power-shift. Because the transmission performance depends on the hydraulic control system, the most important aspect of the optimization is the design of the hydraulic control system. This study was conducted to improve a pressure modulation characteristics of the power-shift transmission hydraulic system. It has been tried to replace an existing pressure modulation method with a digital control by using HSSV(High Speed Solenoid Valve). The performance of the PWM control system in power-shift hydraulic transmission has been evaluated by means of experiment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1229-1240
• /
• 1997

The purpose of this study is to build up control scheme that promptly control pressure in a hydraulic cylinder having comparatively small control volume, using a PCV (proportional control valve) and a digital computer. Object pressure control system has the character to be unstable easily, because the displacement-flow gain of the PCV is too large considering the small volume of the hydraulic cylinder and the time delay of response of the PCV is comparatively long. Considering the above-mentioned characteristics of the object pressure control system, in this study, control system is designed with two degree of freedom control scheme that is composed by adding a feed-forward control path to I-PDD$^{2}$ control system, and a reference model is used on the decision of control parameters. And through some experiments on the control system with FF-I-PDD$^{2}$ controller, the validity of this control method has been confirmed.