• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.479-488
• /
• 2003

Dual-band microstrip antenna is designed for industrial-scientific-medical(ISM) band of 2.4 GHz and 5.8 GHz using finite-difference time-domain method(FDTD). Cross patch 130 by aperture in the ground plane of microstrip line is proposed as radiation element of antenna which is 2 rectangular patch is overlapped. To design antenna, change of input impedance is examined by length change of aperture and stub. And center frequency and - 10 dB bandwidth are investigated by change of length and width in radiation element. Measured result about reflection loss confirm that agree well with simulation results of FDTD and IE3D. And 3 dB beam width, front to back ratio and maximum gain is presented by measuring radiation pattern of antenna in frequency 2.43 GHz and 5.79 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.603-607
• /
• 2009

In this paper, a GPS antenna is designed by using metal film which can be attached on the case of battery without additional space for antenna in GPS band operation. The proposed metal film has a half-wavelength slot radiator. The slot radiator is fed by th electromagnetic field coupled from the GSM850/PCS band antenna. The proposed GPS antenna obtains about 20 MHz bandwidth(VSWR<3) which can cover entire GPS band. The antenna has an average gain of -3.8 dBi.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.253-259
• /
• 2003

This paper presents the basic characteristics of a 5 element dipole array antenna which has a four parastic element and one driving element at the center of the circular array. The coupled integral equations for the unknown current distributions on dipole elements are derived and solved by applying Galerkin's method of moments. The numerical results show that the highest power gain of 7.8 dBi is obtained at radius of d = 0.3lλ when two short circuited parastic element neighbors. In order to verify the theoretical analysis, the radiation pattern is compared with Preston's results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1272-1278
• /
• 2009

The cancellation method of P/G(power/ground) plane resonances which are generated between the power plane and the ground plane in a 4-layer PCB(Printed Circuit Boards) with a via-hole for the improvement of the RE(Radiated Emission) characteristic is presented. The validity of the proposed method was confirmed from simulation and measurement of performances of signal transmission characteristic, intensities of edge-radiation and radiated emission of PCB with a via-hole.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.163-169
• /
• 2017

This paper proposed a method of broadband method of dual polarized dipole antenna for 700 MHz band base station. The proposed antenna has a structure that PCB feeder is mounted on the metallic radiator. The design of radiator and feeder is optimized by using 3D EM simulation. The proposed antenna(bandwidth 31.6 %) is broadened over 12.2 % through the lower frequency band than reference antenna(bandwidth 19.4 %), however the size is not increased. Measured results of S-parameters, radiation patterns, and gain have a good agreement with simulation ones.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.6
• /
• pp.694-701
• /
• 2016

According to revolutionary developments in automobile technologies, eco-friendly advanced vehicles (hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc.) are rapidly increasing. The electromagnetic compatibility is getting more important for development of a vehicle because those advanced vehicles are driven by electric energy and equipped with more electric systems. In general, electromagnetic compatibility tests consist of an electromagnetic interference(EMI) test and an electromagnetic susceptibility(EMS) test. EMI test of the electric vehicles are needed not only in driving mode but also in charging mode because they must be recharged by much electric energy for driving. Depending on vehicle manufacturers, the charging device type and the location of charging device inlet in electric vehicles are various. In this paper, in order to investigate EMI of electric vehicles in charging mode in consideration of the direction of measuring antenna and the location of charging device inlet, a series of electromagnetic emission tests are conducted using three electric vehicles (neighborhood electric vehicle, electric vehicle and electric vehicle-bus). The test results show that electromagnetic emission measurements in charging mode are dependent on the direction of measuring antenna and the location of charging device inlet.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.627-633
• /
• 2000

In this paper, new printed-type inverted F antenna is designed and fabricated to gain the ideal radiation pattern of a rocket-borne antenna which is expected to show the omni-directional pattern characteristic in rear direction. The radiation pattern of this antenna is measured in condition that the antenna is mounted on the side of the fin which is located on the tail of a rocket or a missile. Measurement result shows that the improved symmetrical radiation pattern is obtained with respect to the radiation pattern of the existing inverted F antenna. Besides parasite element which can be operated as reflector is attached in front of the antenna with the distance between the antenna and the parasite element $\lambda$/8. The result shows that the ratio of the front to the rear radiation level is improved by 8 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1122-1130
• /
• 2001

In this paper, by applying the spectral domain wavelet concept to Green function, a fast spectral domain calculation of scattered fields is proposed to get the solution for the radiation integral. The spectral domain wavelet transform to represent Green function is implemented equivalently in space via the constant-Q windowing technique. The radiation integral can be calculated efficiently in the spectral domain using the windowed Green function expanded by its eigen functions around the observation region. Finally, the same formulation as that of the conventional fast multipole method (FMM) is obtained through the windowed Green function and the spectral domain calculation of the radiation integral.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.1004-1011
• /
• 2016

In this paper, we suggested the methodology of analyzing and reconstructing of measured electromagnetic emanations from the Micro Controller Unit(MCU) chip of Universal Serial Bus(USB) keyboard. By analyzing electromagnetic emanations, entered information is found at keystroke and furthermore, information security problems such as personal information leakage and eavesdropping can be arisen. USB keyboards make the radiated signal according to the signal transmission mechanism. Electromagnetic emanations were measured by log periodic antenna and wideband receiver and were analyzed by signal processing algorithm.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.241-244
• /
• 2005

본 논문에서는 UHF 대역 수동형 RFID 태그 안테나의 최적 설계에 필요한 요소들과 전파 음영 문제를 최소화 할 수 있는 다중 리더 안테나 방식에 대하여 분석하였다. 또한, 칩 설계시 RCS 특성이 우수한 칩 임피던스 범위를 설정해 보았으며, 등방성 방사패턴을 갖는 태그 안테나의 필요성과 설계 예를 보였다.