• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.651-658
• /
• 2001

A novel multi-section power divider configuration is proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a planar multi-section three-ports hybrid and a waveguide transformer design procedures. The multi-section power divider is based on design theory of the optimum quarter-wave transformer. Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Thus, each section of the designed waveguide transformer should be operated with evanescent mode over the whole design frequency band of the proposed microwave broadband power divider. This paper presents several simulations and experimental results of multi-section power divider to show validity of the proposed microwave broadband power divider configuration. Simulation and experiment show excellent performance of multi section power divider.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.387-396
• /
• 2004

A scheme to evaluate the number of users and cell coverage of a WCDMA supporting multi-rate traffic is newly presented through calculation of the realizable Erlang capacity from a derived blocking probability and the path loss from the COST231 Walfisch-Ikegami(W) model. We evaluate the voice-data Erlang capacities at various data rates of 15 kbps to 960 kbps and it is shown that they have a linear relationship to each other. When the E$\_$b//N$\_$o/ is low from 4 ㏈ to 3 ㏈ in case of voice capacity of 50 Erlang at 8 kbps, the result shows the increase for the data capacity of 10 Erlang and the enlargement of 100 m for the cell coverage at low rate of 15 kbps, and the increase of 0.11 Erlang and the enlargement of 40 m at high rate of 960 kbps. The increase of the blocking probability results in the increase of the Erlang capacity, but not an effect on the cell coverage, and the increase of active users in a cell results in the decrease of the coverage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.613-624
• /
• 2002

Electrical characteristics of two types of 20 GHz Push-Push GaAs MESFET dielectric resonator oscillators having Wilkinson and T-junction power combiners for the output stage have been investigated and compared. So we have explained that the output power and phase noise properties of the Push-push FET DRO are depending on return loss and isolation characteristics of power combiner at the fundamental and the second harmonic frequencies. A Push-push oscillator for suppressing the fundamental frequency of 10 GHz and enhancing the second harmonic of 20 GHz has been designed and fabricated in microstrip configuration on 20 mil thick RT-Duroid($\varepsilon$$_{r}$ = 2.52) Teflon substrate. Return loss and isolation characteristics of T-junction and Wilkinson have been measured at the fundamental frequency of 10.2 GHz and the second harmonic frequency of 20.5 GHz. At the fundamental frequency, -12 dB return loss and -3.7 dB isolation have been measured for the T-junction power combiner, and -14 dB return loss and -11 dB isolation fur the Wilkinson power combiner. At the second harmonic frequency, -10 dB return loss and -7.5 dB isolation have been obtained for the T-junction power combiner, and -23 dB return loss and -22 dB isolation for the Wilkinson power combiner. As a result, we have confirmed that the oscillator based on the Wilkinson power combiner with better retrun loss and isolation characteristics produces more output power and better phase noise characteristics..

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.716-725
• /
• 2002

In this paper, we showed the applicability of power symmetric MSSI(Mid-Span Spectral Inversion) to the long-haul WDM system with the channel interference due to FWM(Four Wave Mixing). And we showed the degree of performance improvement. We used 1 dB EOP(Eye-Opening Penalty) criterion so as to evaluate the degree of compensation dependent on the variation of chirp parameter of optical pulse for the various input power in high speed tansmission system. And we evaluated the maximum input power of channel be able to be the signal to crosstalk noise (SNR) above 20 dB in the transmission link with the channel interference due to FWM. Consequently the proposed MSSI compensation method is capable to transmitting the total 68 WDM channels simultaneously with a 0.4 nm channel spacing and 5.3 dBm maximum input power in a 10 Gbps transmission link. Therefore the proposed power symmetric MSSI compensation method may be very useful for the implementation of long-haul wideband WDM transmission systems with relatively high power and improved performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.391-400
• /
• 2001

In this paper, the performance of a multicarrier CDMA system applying M-ary orthogonal signaling and adaptive subchannel allocation scheme is analyzed for forward links in Rayleigh fading channel. Also, the effect of error caused by subchannel allocation is analyzed. In the proposed system, each DS waveform is transmitted over the subchannel having the biggest fading among L subchannels. Considering M-ary orthogonal signaling and 4 subchannels, the BER of $10^{-3}$ is satisfied if SNRs are 7.33 dB, 5.33 dB, and 4.47 dB for k = 1, 2, and 3, respectively. Therefore, SNR is decreased as k is increased. If the error of subchannels exists, the BER of $10^{-3}$ is met if SNR is 8.18 dB in the absence of M-ary orthogonal signaling. So, a required SNR is declined about 0.85 dB. Adding the M-ary orthogonal signaling with k = 4, it is observed that the multicarrier CDMA system has performance improvement because a required SNR is 5.44 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.208-213
• /
• 2011

This paper analyzes potential interference effects of Ultra Wide Band(UWB) on Global Positioning System(GPS) which is providing safety service. For the interference analysis, positioning error method is used to determine the minimum protection distance to meet positioning error of 2.5 m below and Minimum Coupling Loss(MCL) method is used to determine the required protection ratio(I/N) from the protection distance of UWB transmitter and GPS receiver to meet positioning error of 2.5 m below. In a result, the minimum protection distance to meet positioning error of 2.5 m below was about 10 m and the protection ratio to meet positioning error 2.5 m below was -20 dB. The protection ratio proposed in this paper is the same value of the protection ratio of safety service proposed by ITU-R. The obtained protection ratio can be used for the protection standard of domestic GPS system for the safe of life service.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1307-1314
• /
• 2012

To reduce the effects of clutters with subsurface inhomogenities in ground-penetrating radar(GPR) images, an eigenimage based signal-processing technique is presented. If the conventional eigenimage filtering technique is applied to B-scan images of a GPR survey, relatively homogeneous clutters such as antenna ringing, direct coupling between transmitting and receiving antennas, and soil-surface reflection, can be removed sufficiently. However, since random clutters of subsurface inhomogenities still remain in the images, target signals are distorted and obscured by the clutters. According to a comparison of the eigenimage filtering results, there is different coherency between subsurface clutters and target signals. To reinforce the pixels with high coherency and reduce the pixels with low coherency, the pixel-by-pixel geometric-mean process after the eigenimage filtering is proposed here. For the validity of the proposed approach, GPR survey for detection of a metal target in a randomly inhomogeneous soil is numerically simulated by using a random media generation technique and the finite-difference time-domain(FDTD) method. And the proposed signal processing is applied to the B-scan data of the GPR survey. We show that the proposed approach provides sufficient enhancement of target signals as well as remarkable reduction of subsurface inhomogeneous clutters in comparison with the conventional eigenimage filtering.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.98-105
• /
• 2013

This paper presents a finite-difference time-domain(FDTD) simulation and a data processing technique for radar sensing of the internal structure of a wall using an ultra-wide band antenna. We first designed an ultra-wide band anti-podal vivaldi antenna with a frequency range of 0.3~7 GHz which is chosen to be relatively low after considering the characteristics of wave attenuation, wall penetration, and range resolution. In this study the two-dimensional FDTD technique was used to simulate a wall-penetration-radar experiment under practical conditions. The next, the measured radiation pattern of the practical antenna is considered as an equivalent source in the FDTD simulation, and the reflection data of a concrete wall and targets are obtained by using the simulation. Then, a data processing technique has been applied to the FDTD reflection data to get a radar image for remote sensing of the internal structure of the wall. We compared the two different source excitations in the FDTD simulation; (1) commonly-used isotropic point sources and (2) polynomial curve fitting sources of the measured radiation pattern. As a result, when we apply the measured antenna pattern into the FDTD simulation, we could obtain about 2.5 dB higher signal to noise level than using a plane wave incidence with isotropic sources.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.987-993
• /
• 2013

Chaos communication system has characteristics of non-periodic, non-predictability, broadband signal and easy implementation. Also, chaos communication system is sensitive to the initial value, because completely another signal is generated when initial value of chaos equation is changed subtly. By these characteristics, security of chaos communication system is generally evaluated better than other digital communication systems. However, BER(Bit Error Rate) performance is worse than other digital communication systems, because transmitter and receiver of existing chaos communication system are strongly influenced by reference signal and noise. So, studies in order to improve the BER performance of chaos communication system is continuously performed. In this paper, We will propose a new CDSK (Correlation Delay Shift Keying) receiver in order to improve the BER performance. After we compare to the performance of existing receiver and proposed receiver, BER performance of proposed receiver evaluate. A novel receiver has characteristic that BER performance is better than existing receiver. However, if existing transmitter is used, existing receiver is possible to recover information bits even though BER performance is bad. Therefore, we propose a novel CDSK transmitter in order to improve the security of proposed receiver. When information bits are transmitted by using proposed transmitter, existing receiver is impossible to recover information bits, and proposed receiver is possible to recover information bits.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.6
• /
• pp.435-443
• /
• 2017

In this study, we analyzed the effects of the common-gate transistor bias of a switching mode CMOS power amplifier. Although the most earier works occured on the transistor sizes of the cascode structure, we showed that the gate bias of the common-gate transistor also influences the overall efficiency of the power amplifier. To investigate the effect of the gate bias, we analyzed the DC power consumption according to the gate bias and hence the efficiency of the power amplifier. From the analyzed results, the optimized gate bias for the maximum efficiency is lower than the supply voltage of the power amplifier. We also found that an excessively low gate bias may degrade the output power and efficiency owing to the effects of the on-resistance of the cascode structure. To verify the analyzed results, we designed a 1.9 GHz switching mode power amplifier using $0.18{\mu}m$ RF CMOS technology. As predicted in the analysis, the maximum efficiency is obtained at 2.5 V, while the supply voltage of power amplifier is 3.3 V. The measured maximum efficiency is 31.5 % with an output power of 29.1 dBm. From the measureed results, we successfully verified the analysis.