• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.141-144
• /
• 2000

PRML (partial response maximum-likelihood) 과 FDTS/DF (fixed-delay tree search with decision feedback)는 기록 저장 시스템에서 준최적의 성능을 보임이 잘 알려져 있다. 그러나, 위와 같은 정보열 검출 기법은 피할 수 없는 복잡도 문제를 가지고 있다. 본 논문은 최소 run 길이 제한조건 d=2를 가진 광기록 채널을 위한 다양한 저복잡도 검출 기법을 다룬다. 우선, 결정 궤환 기법을 이용한 이산 정합 여파기 (discrete matched filter with decision feedback：DMF/DF)가 기존의 PRML로부터 유도된다. 유도된 시스템은 PRML보다 결정 궤환에 의한 성능 이득을 갖는다. 또한, 메트릭 계산을 사용하지 않는 저복잡도 FDTS/DF가 유도된다. 모의실험 결과에 의하면, 유도된 저복잡도 검출 기법들은 기록 밀도 S>=5.5에서 P(D)=1+D+D/sup 2/+D/sup 3/의 target을 갖는 PRML보다 우수한 성능을 보인다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.205-208
• /
• 2004

본 논문에서는 직접 변환 방식의 가장 큰 문제점 중 하나인 DC 오프셋 문제를 개선하기 위한 방안으로, 서브 하모닉 저항성 믹서를 GaAs FET 소자를 이용하여 제작하였다. 측정된 결과 LO 주파수의 2 차 하모닉 성분을 이용하는 특성상 변환이득은 일반 믹서보다 큰 -15.0dB의 특성을 얻었다. 또한 별도의 대역통과 여파기를 사용하지 않고도 LO-IF 및 LO-RF 분리도 특성은 최소 48.2dB와 77.8dB의 양호한 특성을 나타내었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.387-390
• /
• 1998

We propose comb-line filter using SIR(Stepped Impedance Resonator) with two transmission line. The coupling structure of the filter is double coupled line where two coupled lines are linked with cascade. We find out the inverter function of the filter. using even and odd mode impedance. The merits of the filter are that first, we can design transmission zero point at any frequency that we wanted without using lumped elements : chip capacitors and inductors. Second, we can design small size filters. To validate the inverter function of the filter with double coupled line we designed and fabricated two-pole band pass filter with the proposed filter structure.

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.16-26
• /
• 1998

This paper presents a design methodology for magnetically tunable X-band E-plane type waveguide filters. The proposed design is based on using of quarter wavelength transmission line for compensating the negative length transmission line of end K-inverters of E-plane type waveguide filters. The derived formulae are applied for initial design and the correction method is also provided for final design by considering the frequency dependent characteristic of K-inverters. The analysis results of E-plane pype waveguide structure loaded with ferrite slab are obtained using the edge based finite element method including higher order mode effecets. It is shown that the unilateral finline E-plane type waveguide filter as well as the bilateral finline E-plane type waveguide filter achieves the the manetically tunable characteristic. The X-band experimantal results for bilateral and unilateral finline E-plane type waveguide filters agree well with the simulated data.

• 대한전자공학회논문지
• /
• 제27권8호
• /
• pp.1260-1264
• /
• 1990

A voltage controlled CMOS operational transconductance amplifier (OTA), whose transconductance is directly proportional to the DC bias voltage, has been designed for many electronic circuit applications. It consists of a differential pair and three ourrent mirrors. The SPICE simulation shows that the conversion sensitivity of the OTA is 41.817 \ulcornerho/V and the linearity error is less than 0.402% over a bias voltage range from -2. OV to 1. OV. Electrically tunalble filters based on voltage controlled impedances, which are realized with OTA's, also have been designed. The SPICE simulation shows that a second-order bandpass filter, whose center frequency is 23KHz at -1. OV, has the conversion sensitivity 6.6KHz/V and the linearity error less than 0.822% over a voltage range from -2.OV tp 1.OV, Tne OTA has been laid out with the 3\ulcorner n-well CMOS design rule adopted in ISRC (inter-university semiconductor research center). The chip size was about $0.756x0.945mm^2$.

• 전자공학회논문지A
• /
• 제31A권1호
• /
• pp.33-38
• /
• 1994

In this paper, waveguide banpass filters using H-plane step discontinuities are designed based on the field theory analysis and optimization of the resonator lengths as well as dimensions of discontinuities, instead of the conventional synthesis method based on the equivalent circuit. The waveguide inductive obstacles introduced by H-plane step discontinuities analyzed using mode-matching method and the generalized scattering parameters are derived. Using the derived scattering parameters of the discontinuities as well as those of resonators, waveguide bandpass filters are designed through optimization method, modified Razor search method proposed by J.H.Bandler. Using this design procedures, waveguide bandpass filters are designed and tested at X-band(center frequency 10GHz) as well as Ka-band(center frequency 35GHz).

• 전자공학회논문지D
• /
• 제34D권10호
• /
• pp.53-59
• /
• 1997

In this paper, we present a 20 GHz low-loss dual-mode channel filter designed by using mode matching method. The performance of dual-mode channel filter mainly depends on iris characteristics. Therefore the exact design of iris is the key point to get good frequncy response of the filter. MOde matching technique is widely used ot design several kinds of waveguide filters because it is simple in theory and can easily calculate the scattering matrices at the discontinuities with simple structure like iris coupled filters. Additionally the effect for finite thickness of the iris in the dual-mode cavity iflter is analyzed by te full-wave method, providing the exact filter implementation without trial and error.

• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.19-28
• /
• 1995

In this paper, measured iris transmission loss data and simulated data by using 3-dimension full-wave analysis S/W are presented and compared with Marcuvitz's theory. And by using measured iris data, dual-mode narrow-band channel filters can be successfully implemented. This paper shows that there is severe difference between the transmission loss of iris calculated by using Marcuvitz's equation to calculate iris dimension, if the length of slot iris is longer than .lambda./.pi., and in the long urn the response of channel filter is distorted. Experimental result shows that the characteristic response of implemented channel filter by using the iris transmission loss graph presented here matches well the design specfications. In conclusion, iris transmission loss measurement method will be very useful to design channel filter.

• 대한전자공학회논문지
• /
• 제22권4호
• /
• pp.33-38
• /
• 1985

방향성예파기의 상보적 주파수특성을 이용하여 마이크로밧믹서에서 RF와 IF를 서로 분리시킬 수 있는 방법을 구하고, 그것에 의하여 5-Band에서 결랭마이크로스트립 여파기를 제작하여 실험적으로 확인하였다. 3.7∼4.2GHz의 평형믹서에 적용시켰을 때 사리도가 전상량에서 20dB 이상을 얻었으며 이것은 DBS 수신기에 직접 이용할 수 있음을 알았다.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.62-71
• /
• 1996

In this paper, we design tripel-mode channel filter using iris optimization technique and investigate its response. The cavity diameter is determined to resonate three orthogonal modes coincidently and inter-cavity iris is optimized in which one slot control one TE-TE mode and other TM-TM mode couplings simultaneously. Since the electric/magnectic field is variable due to slot position, the center position of the slot which handle coupling coefficients of two modes should be designe dwith optimizatin technique presented here. The implemented triple-mode filter in this paper saves its mass and volume upto 33% relating to the dual-mode filter, caused by the reduced number of cavities.