• Journal of Adhesion and Interface
• /
• v.13 no.1
• /
• pp.17-23
• /
• 2012

A fragrant microcapsule was prepared for use by students to reduce the stress of taking examinations. Rosmarinic acid was used as a fragrant oil which had the effect of relaxing stress, polycaprolactone (PCL) was used as a capsule wall material, and poly(vinyl alcohol) (PVA) as a stabilizer. The solvent evaporation method was used to form the microcapsule. The microcapsules were prepared by changing the stirring rate, the concentration of the stabilizer, and the molecular weight of PCL. The shape of the microcapsule was characterized by scanning electron microscopy (SEM). The size of the microcapsule was reduced by increasing the stirring speed. The release rate of rosmarinic acid was decreased when the higher molecular weight PCL was used. When the prepared microcapsule was tested in an aromatherapy class, the microencapsulated fragrant oil had a longer release time than the original fragrant oil. The study data showed that this fragrant oil was effective for increasing concentration ability, reducing stress, increasing digestive power, and increasing memory for the students.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.783-789
• /
• 2011

Recently, auto-thermal thermophilic aerobic digestion (ATAD) has a great attention for destruction of wasted sludge biomass in wastewater treatment plant. Reduction of sludge concentration has been successfully achieved with pilot scale ATAD and ceramic filtration process in field condition. However, high concentration of COD, total nitrogen (TN) and total phosphorus (TP) was observed in filtrate, which should be treated before recirculation of filtrate to biological wastewater treatment plant. This study was focused on removal of nitrogen and phosphorus contained in the filtrate of ATAD, using struvite crystallization method. The effect of operational and environmental parameters (such as, N, P and Mg ion concentration and molar ratio, pH, reaction time, agitation strength, seed dosage, and reaction temperature) on the treatment of TN and TP with struvite crystallization were evaluated. Magnesium (as $MgCl_26H_2O$) and phosphorus (as $K_2HPO_4$) ions were, if necessary, added to increase nitrogen removal efficiency by the crystal formation. Average concentration of $NH_4^+-N$ and $PO_4^{3-}-P$ of the filtrate were 1716.5 mg/L and 325.5 mg/L, respectively. Relationship between removal efficiencies of nitrogen and phosphorus and molar ratios of $Mg^{2+}$ and $PO_4^{3-}-P$ to $NH_4^+-N$ was examined. Crystal formation and nitrogen removal efficiencies were significantly increased as increasing molar ratios of magnesium and phosphorus to nitrogen. As molar ratio of $Mg^{2+}:PO_4^{3-}-P:NH_4^+-N$ were maintained to 2 : 1 : 1 and 2 : 2 : 1, removal efficiencies of nitrogen and phosphorus were 71.6% and 99.9%, and 93.8% and 98.6%, respectively. However, the effect of reaction time, mixing intensity, seed dose and temperature on the struvite crystallization reaction was not significant, comparing to those of molar ratios. Settled sludge volume after struvite crystallization was observed to be reduced with increase of seed dose and to be increased at high temperature.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.488-490
• /
• 2010

최근 심각한 환경오염 문제와 화석 에너지 고갈로 차세대 청정 에너지 개발에 대한 중요성이 증대되고 있다. 그중에서 태양정지는 공해가 적고, 자원이 무한적이며 반 영구적인 수명을 가지고 있어 미래에너지 문제를 해결할 수 있는 에너지원으로 기대되고 있다. 본 연구에서는 P3HT(regioregular poly(3-hexylthiophene))와 PCBM(fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester)을 전자 도너와 억셉터 물질을 하나의 브랜드로 광 활성층을 형성하는 BHJ(bulk hetero junction)구조를 갖는 고분자 유기 박막 태양전지를 각각 Toluene, Mono-Chlorobenzene, Dichlorobenzene에 $60^{\circ}C$, 200rpm으로 약 12시간동안 1wt%로 교반(Stirring)한 후에 중량비(1:1 wt%)로 혼합하여 스핀코팅(Spin-coating)으로 제작하였고, 완성된 소자의 광활성층 면적은 0.04cm2이며, $150^{\circ}C$에서 후속 열처리 공정을 통해 특성 향상이 측정 되었다. 태양전지 소자 구조는 Glass / ITO / PEDOT:PSS / P3HT : PCBM / Al이다. 전류-전압, FF(Fill Factor), 변환효율 측정을 위해 solar simulator를 AM1.5 조건(100 mW/cm2)으로 이용하였으며, 소자의 최대 전류밀도는 12mA/$cm^2$, 개방전압은 0.566V이고 F.F(Fill Factor)는 55.2%이고 변환효율은 3.7%이다. 후속 열처리후 더욱 좋은 성능을 갖게 되었고, 최대 효율은 Dichl orobenzene일 때 이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.71-71
• /
• 2011

ZnO 반도체가 넓은 에너지띠와 큰 엑시톤 결합에너지를 가지기 때문에 가진 투명 전극, 태양전지, 발광소자 및 메모리와 같은 다양한 전자 및 광전자 소자의 응용에 대한 많은 연구가 활발히 진행되고 있다. 본 논문에서는 절연성 고분자인 폴리스티렌 박막에 분산되어 있는 ZnO 나노 입자를 기억 매체로 사용하는 write-once-read-many times (WORM) 메모리 소자를 제작하고 전기적 성질과 안정성에 대하여 관찰하였다. 화학적 방법으로 형성한 ZnO 나노입자와 폴리스티렌을 N,N-dimethylformamide 용매에 녹인 후 초음파 교반기를 사용하여 나노 복합 소재를 형성하였다. 하부 전극으로 indium-tin-oxide가 증착되어 있는 유리 기판 위에 나노 복합 소재를 스핀코팅 방법으로 도포한 후 열을 가해 잔류 용매를 제거하였다. ZnO 나노입자가 분산되어 있는 폴리스티렌 나노 복합 소재로 구성된 박막위에 상부 전극으로 Al을 열증착하여 메모리 소자를 제작하였다. 전류-전압 측정 결과에서 저전압에서는 전도도가 낮은 OFF 상태를 유지하다 약 1.5 V에서 전도도가 갑자기 증가하여 높은 전도도의 ON 상태로 전이되는 쌍안정성이 관찰되었다. 전류의 ON/OFF 비율은 약 103이며 ON 상태에서 OFF 상태로 전환되지 않는 전형적인 WORM 메모리 소자의 전류-전압 특성을 나타났다. 두 전극 사이에 폴리스티렌 박막으로만 제작된 소자를 제작하여 전류-전압 측정을 하였으나 메모리 특성이 나타나지 않았다. 그러므로 WORM 메모리 특성은 폴리스티렌 박막안의 ZnO 나노입자에 기인함을 알 수 있었다. 제작된 소자에 대해 기억 시간 측정 결과는 ON과 OFF 상태의 전류가 장시간에도 변화가 거의 없는 소자의 안정성을 보여주었다. 이 실험 결과는 ZnO 나노입자가 분산된 폴리스티렌 나노 복합 구조체를 사용하여 안정성을 가진 WORM 메모리 소자를 제작할 수 있음을 보여주고 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.368-368
• /
• 2012

무기물 나노입자를 포함하는 유기물/무기물 나노복합체는 플렉시블 전자 소자에 적용이 가능하기 때문에 차세대 비휘발성 메모리 소자에 대한 응용연구가 활발히 진행되고 있다. 본 논문에서는 $CuInS_2$ (CIS)/ZnS 코어-쉘 나노 입자를 포함한 poly(N-vinylcarbazole) (PVK) 고분자 박막을 기억 매체로 사용하는 유기 쌍안정성 소자(organic bistable devices, OBD) 메모리 소자를 제작하고 전기적 성질에 대하여 관찰하고 전하 수송 메카니즘에 대하여 규명하였다. 화학적 방법으로 형성한 CIS/ZnS 코어-쉘 나노 입자와 PVK를 toluene 용매에 녹인 후 초음파 교반기를 사용하여 나노 복합 소재를 형성하였다. 하부 전극으로 indium-tin-oxide (ITO)가 증착되어 있는 유리 기판 위에 나노 복합 소재를 스핀코팅 방법으로 도포한 후 열을 가해 잔류 용매를 제거하였다. CIS/ZnS 코어-쉘 나노 입자가 분산되어 있는 PVK 나노 복합 소재로 구성된 박막위에 상부 전극으로 Al을 열증착하여 메모리 소자를 제작하였다. 전류-전압 (I-V) 측정 결과에서 저전압에서는 전도도가 낮은 OFF 상태를 유지하다 어느 특정 양의 전압에서 전도도가 갑자기 증가하여 높은 전도도의 ON 상태로 전이되는 쌍안정성이 관찰되었다. 전류의 ON/OFF 비율은 약 $10^3$이며 역방향 바이어스를 가해주었을 때 특정 음의 전압에서 전도도가 ON 상태에서 OFF 상태로 전환되는 전형적인 OBD 메모리 소자의 I-V 특성을 나타났다. 메모리 전하 수송 메커니즘 분석 결과 쓰기 과정은 thermionic emission (TE), space-charge-limited-current (SCLS) 모델과 지우기 과정은 Fowler-Nordheim (FN) 터널링 모델로 설명이 되었다. 제작된 소자에 대해 기억 시간 측정 결과는 ON과 OFF 상태의 전류가 장시간에도 변화가 거의 없는 소자의 안정성을 보여주었다. 이 실험 결과는 CIS/ZnS 코어-쉘 나노 입자가 분산되어 있는 PVK 나노 복합 소재를 사용하여 안정성을 가진 OBD 메모리 소자를 제작할 수 있음을 보여주고 있다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.1
• /
• pp.41-50
• /
• 2010

We have developed an in-situ benthic chamber (BelcI) for use in coastal studies that can be deployed from a small boat. It is expected that BelcI will be useful in studying the benthic boundary layer because of its flexibility. BelcI is divided into three main areas: 1) frame and body chamber, 2) water sampler, and 3) stirring devices, electric controller, and data acquisition technology. To maximize in-situ use, the frame is constructed from two layers that consist of square cells. All electronic parts (motor controller, pA meter, data acquisition, etc.) are low-power consumers so that the external power supply can be safely removed from the system. The hydrodynamics of BelcI, measured by PIV (particle image velocimetry), show a typical "radial-flow impeller" pattern. Mixing time of water in the chamber is about 30 s, and shear velocity ($u^*$) near the bottom layer was calculated at $0.32\;cm\;s^{-1}$. Measurements of diffusivity boundary layer thickness showed a range of $180-230\;{\mu}m$. Sediment oxygen consumption rate, measured in-situ，was $84\;mmol\;O_2\;m^{-2}\;d_{-1}$, more than two times higher than on-board incubation results. Benthic fluxes assessed from in-situ incubation were estimated as follows: nitrate + nitrite = $0.18\;{\pm}\;0.07\;mmol\;m^{-2}\;d^{-1}$ ammonium $23\;{\pm}\;1\;mmol\;m^{-2}\;d^{-1}$ phosphate = $0.09\;{\pm}\;0.02\;mmol\;m^{-2}\;d^{-1}$ and silicate = $23\;{\pm}\;1\;mmol\;m^{-2}\;d^{-1}$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.706-712
• /
• 1999

PSD (particle size distribution) for 2,000 mg/$\ell$ natural loess in seawater showed normal distribution cure at 0 minute settling time, accompanying with very large particle distribution range with its mean particle diameter of 31.6 $\mu$m and coencient of variance of $72.6\%$, With elapsed time it showed that the PSD was rapidly changed from normal distribution cure to abnormal distribution curve, steepened the right-hand side of it and its coefficient of variance was getting increased because of rapid settling of large size particles, Cumulative weight distribution showed that 2,000 mg/$\ell$ natural loess in seawater was almost $100\%$ constituted of particles bigger than 20 $\mu$m in diameter. Ratio of $V_s/(D_{bm})^{1/2}$ for loess particles in seawater was increased with increase of particle size in geometrical progression. Almost all loess particles in seawater had Stokes settling velocity not less than 2,255 times of Brownian diffusion coefficient, There was almost to EDL (about 0.4 nm) around natural loess particles in seawater, Thus, there was always LVDW attractive force between loess particles approaching each other in seawater, and almost no EDL repulsive force. Loess particles were not always in the condition of easy floe formation. Concentration of natural loess in seawater increasing from 400 mg/$\ell$ to 10,000 mg/$\ell$, characteristics of the settling was changed from Type I settling (discrete settling) to Type II settling (flocculation settling). PVD (particle volume distribution) showed that natural loess particles in seawater were largely constituted of two types of particles, such as rapidly settling particles and suspended and dispersed particles for a long time. Amount of the latter was much less than that of the former.

• Journal of the Korean Society of Radiology
• /
• v.10 no.4
• /
• pp.255-261
• /
• 2016

In this study, among various factors having influence on SUV, we intended to compare and analyze the change of SUV using CT(4 type) and MRI(3 type) contrast agents which are commercialized now. We used Discovery 690 PET/CT(GE) and NEMA NU2 - 1994 PET phantom as experimental equipment. We have conducted a study as follows; first, we filled distilled water to phantom about two-thirds and injected radioisotope(18F-FDG 37 MBq), contrast agent. Second, we mixed CT contrast agent with distilled water and MRI contrast agent with that water separately. And then, we stirred the fluid and filled distilled water fully not to make air bubble. In emission scan, we had 15minutes scanning time after 40 minutes mixing contrast agent with distilled water. In transmission scan, we used CT scanning and its measurement conditions were tube voltage 120 kVp, tube current 40 mA, rotation time 0.5 sec, slice thickness 3.27 mm, DFOV 30 cm. Analyzing results, we set up some ROIs in 10th, 15th, 20th, 25th, 30th slice and measured SUVmean, SUVmax. Consequently, all images mixed 3 types of MRI contrast agent with distilled water have high SUVmean as compared with pure FDG image but there was no statistical significance. In SUVmax, they have high score and there was statistical significance. And other 4 images mixed 4 types of CT contrast agent with distilled water have significance in both SUVmean and SUVmax. Attenuation correction in PET/CT has been executed through various methods to make high quality image. But we figured out that using CT and MRI contrast agents before PET/CT scanning could make distortion of image and decrease diagnostic value. In that reason, we have to sort out the priority of examination in hospital not to disturb other examination's results. Through this process, we will be able to give superior medical service to our customers.