• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.16-23
• /
• 2006

This paper presents a novel single-stage high frequency resonant inverter link type DC-DC converter using zero voltage switching with high power-factor. The proposed topology is integrated half-bridge boost rectifier as power factor corrector(PFC) and half-bridge high frequency resonant converter into a single-stage. The input stage of the half-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. Simulation results have demonstrated the feasibility of the proposed high frequency resonant converter. Characteristics values based on characteristics analysis through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, fluorescent lamp and DC-DC converter etc.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.29-29
• /
• 2010

건물일체형 태양전지 (BIPV; building integrated photovoltaics)나 야외 태양광 발전 차양 등의 태양광 발전에는 기존의 유리 기판 태양전지보다 가볍고 유연한 flexible 박막 태양전지가 설치하고 운영하는데 적합하다. 이러한 flexible 박막 태양전지는 자동차나 휴대기기의 전원이나 배터리의 충전기기로도 쓰이며 그 수요가 증가 추세에 있다. 특히, flexible Cu(In, Ga)$Se_2$(CIGS) 박막 태양전지는 기존의 flexible 실리콘 박막 태양전지보다 효율이 높아서 앞으로 성장 잠재력이 매우 높다. 세계적으로도 많은 기업이 상용화를 추진하고 있으며, 2007년부터 시장에 진입하고 있다. 그러나 현재의 flexible CIGS 박막 태양전지는 유리 기판 CIGS 박막 태양전지보다 효율이 낮고 패키지를 유리에서 플라스틱으로 대체하기 때문에 수명이 짧다. 또한, 아직도 완전한 양산 체제로 전환이 이루어지지 않았기 때문에 해결해야 할 문제점이 많이 있다. Flexible 기판으로는 스테인리스 스틸이나 폴리머 기판이 사용되는데, 유리 기판에 비해 저가 태양전지를 제조할 수 있을 뿐만 아니라 roll-to-roll 공정을 적용할 수 있어 가격 경쟁력을 확보할 수 있다. 특히, 금속 유연기판을 사용할 경우, 유리 기판에 비해 상대적으로 고온 공정이 가능한 장점이 있다. 그러나, 금속 기판을 사용할 경우 해결해야 할 두 가지 이슈가 있다. 첫째, CIGS 흡수층 형성에 도움을 주는 Na의 공급 문제이다. 유리 기판의 경우 기판에 포함되어 있는 Na이 확산을 통해 공급되지만, 금속 기판의 경우 별도의 Na 공급 방법을 고려해야 한다. 둘째, 불순물 확산 방지막 및 전기 절연층으로 사용되는 유전체 박막의 문제이다. 현재 다양한 금속 산화물 유전체 박막을 사용한 연구가 진행되고 있다. 본 논문에서는 flexible CIGS 박막 태양전지의 기술적 이슈 및 현재 연구 현황을 살펴보고, 스테인리스 스틸 기판을 이용한 CIGS 박막 태양전지에서 유전체 확산 방지막에 따른 특성을 비교하고자 한다. 스테인리스 스틸 기판의 불순물로부터의 확산을 방지하기 위하여 두 종류(intrinsic ZnO와 SiOx)의 유전체 박막을 각각 Na가 도핑된 Mo층과 스테인리스 스틸 기판 사이에 삽입하여 소자를 제작하였다. 확산 방지막이 없는 경우, SiOx층을 사용한 경우, 그리고 intrinsic ZnO 층을 사용한 경우에, 효율은 각각 7.47, 11.64, and 13.95%로 나타났다. 셀의 크기는 $0.47\;cm^2$이고, 반사방지막은 사용하지 않았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5464-5468
• /
• 2011

This paper deals with the development of the safety lancet and the electric lancing device. The safety lancet, in which a needle and a protective cap become one body, is designed. It is to prevent the secondary contamination by needlestick injury because the needle is always in the protective cap except for a moment of blood-gathering. The electric lancing device powered by batteries is devised to be operated by the moving rod of solenoid hitting the lancet. and to be used after selecting the repeat or the single hitting mode. The impact force by a hitting rod, the expected life of battery and etc. are measured for product development. This lancing device can be also used for the bloodletting device of the oriental medicine.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.101-112
• /
• 2018

This study was carried out to enhance the competitiveness of blackbox design for domestic and international companies, based on the explosive growth of the blackbox market due to development of blackbox design for vehicle accident prevention and post-treatment. In the past, the blackbox market has produced products indiscriminately to meet the ever-increasing demand of consumers. Therefore, we thought a new design method was necessary to effectively investigate the needs of rapidly changing consumers. In this study, we aimed to identify the best-selling blackbox to understand the design flow, and the optimum area for a blackbox, considering the uniqueness of associated vehicle. Based on discussion with blackbox design experts, we studied the direction of design and the problems with blackbox use, which were reflected in blackbox development. Through this research, two types of design - leading blackbox (A type) and mass production blackbox (B type) - were proposed for compatibility of the blackbox with the car. The leading type of blackbox was positioned so that it was wrapped with the room mirror hinge before the screw was fastened, in order to achieve an integrated design. Therefore, we designed an integrated form and resolved the placement problem of an adhesive blackbox. To blend, the mass production blackbox implemented material and surface processing in the same way with the car, and adopted the slide structure to automatically turn off the main body power when removing the SDcard, reflecting consumer needs. This study considers evolving consumer needs through a case study and collective intelligence and deals with implementation of the whole design process during mass production. In this study, we aimed to strengthen the competitiveness of the blackbox design based on design method and its realization.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.67-76
• /
• 2005

This paper proposes a compact-sized surface myoelectric sensor for the myoelectric hand prosthesis. To fit the surface myoelectric sensor in the socket for the myoelectric hand prosthesis, the sensor should be a compact size. The surface myoelectric sensor is. composed of a skin interface and a single processing circuit that are mounted on a single package. The skin interface has one reference and two input electrodes, and the reference electrode is located in the center of two input electrodes. In this paper we propose two types of sensors with the circle- and bar-shaped reference electrode, but all input electrodes are the bar-shaped. The metal material of the electrodes is the stainless steel (SUS440) that endures sweat and wet conditions. Considering the conduction velocity and the median frequency of the myoelectric signal, we select the inter-electrode distance (IED) between two input electrodes as 18mm, 20mm, and 22 mm. The signal processing circuit consists of a differential amplifier with a band pass filter, a band rejection filter for rejecting 60Hz power-line noise, amplifiers, and a mean absolute value circuit. We evaluate the proposed sensor from the output characteristics according to the IED and the shape of the reference electrode. From the experimental results we show the surface myoelectric sensor with the 18mm IED and the bar-shaped reference electrode is suitable for the myoelectric hand prosthesis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.628-636
• /
• 2018

Because large buoys are mainly made of steel, they are heavy and vulnerable to corrosion by sea water. This makes buoy installation and maintenance difficult. Moreover, vessel collision accidents with buoys and damage to vessels due to the material of buoys (e.g., steel) are reported every year. Recently, light buoys adopting eco-friendly and lightweight materials have come into the spotlight in order to solve the previously-mentioned problems. In Korea, a new lightweight buoy with a 7-Nautical Mile lantern adopting expanded polypropylene (EPP) and aluminum to create a buoyant body and tower structure, respectively, was developed in 2017. When these light buoys are operated in the ocean, the visibility and angle of light from the lantern installed on the light buoys changes, which may cause them to function improperly. Therefore, research on the performance of light buoys is needed since the weight distribution and motion characteristics of these new buoys differ from conventional models. In this study, stability estimation and motion analyses for newly-developed buoys under various environmental conditions considering a mooring line were carried out using ANSYS AQWA. Numerical simulations for the estimation of wind and current loads were performed using commercial CFD software, Siemens STAR-CCM+, to increase the accuracy of motion analysis. By comparing the estimated maximum significant motions of the light buoys, it was found that waves and currents were more influential in the motion of the buoys. And, the estimated motions of the buoys became larger as the sea state became worser, which might be the reason that the peak frequencies of the wave spectra got closer to those of the buoys.