• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.486-489
• /
• 2004

대용량의 직류 전원을 연속적으로 얻기 위한 가장 손쉬운 방법은 상용 교류전력을 정류하여 사용하는 것이다. 이렇게 얻어진 직류 전압 원은 리플을 포함하는 문제와 허용된 법위에 있지만 전압 변동율이 존재하게 된다. DC-DC 컨버터나 인버터 제어에서 이러한 문제를 해결하기 위하여 많은 연구가 행해지고 있다. 그러나 보상제어시간이 길거나 제어나 제어 이론이 복잡하여 시스템이 복잡하게 되는 등 각각의 문제점을 가지고 있다. 본 연구에서는 아나로그 적분기의 적분시간이 적분기 입력전압의 크기에 반비례하는 원리를 이용하여 이 펄스 변조 스위칭 컨버터를 순시 추종 제어하는 방법을 제시한다. 제안된 제어방법의 주요 특징은 정주촉수로 동작한다. 보상제어시간은 스위칭 주기를 기본단위로 추종제어 한다. 제어결과는 한 주기의 평균치로 추종 제어한다. 정상상태는 물론 과도 상태에서도 정확하게 지령치에 추종하여 제어됨을 알 수 있다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.100-103
• /
• 2004

This paper presents the aspect and distribution of voltage and current harmonics being made at low voltage power systems. The voltage and current harmonics in power systems supplying various loads were monitored and analyzed. We have examined the results compared to advanced countries' harmonics control standards. As a result, the current harmonics were significantly greater than the voltage harmonics. In particular, the harmonics of currents flowing through loads with power switching electronics was pronounced. Also, the contents of current harmonics of street lamp circuits was about 30%, and it was decreased to 12.3% with the installation of series reactor. On the whole, The measured results of voltage and current harmonics exceeds the regulation limits recommended by IEEE 519-1992.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.99-105
• /
• 2010

This paper discussed the theoretical simulation results for developing the blumlein pulsed power source and showed the circuit configuration and the discharge characteristics of the realistic manufactured pulsed power system. In the simulation, the output voltage characteristics at a load resistor showed the general impulse shape when the impedance of a single coaxial cable is matched with the that of a load resistor. In addition, it is confirmed that output values of the pulsed power can be easily controlled by the duplication of coaxial cables and the pulsed waveform showed the general impulse characteristics. Specifically, the inception discharge voltage in the gap distance of 5[mm] between needle and plane electrodes is about 20[kV] and which is lower than about 29[kV] in 9[mm] due to the difference of the reaching time of the inception voltage. Therefore, this paper showed that the output voltage of the blumlein pulsed power source can be easily controlled.

• 조명전기설비학회논문지
• /
• 제15권3호
• /
• pp.18-24
• /
• 2001

본 연구에서는 단상 PWM 컨버터와 3상 PWM 전압형 인버터 유도전동기 운전으로 나누 어져 있다. 단상 시스템의 교류 전원의 주파수에는 순시전력의 맥동성분을 가진다. 컨버터의 직류 맥동전압은 맥동성분을 발생시킨다. 결과적으로 인버터의 출력전압과 전류의 파형은 왜곡된다 시스템의 정상상태는 상태공간법으로 해석된다. 이러한 모든 사항은 시뮬레이션과 실험을 통하여 그 타당성을 확인하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.249-253
• /
• 2006

Because of the high cost for the active power filter, passive filters have been widly used to absorb harmonic currents of nonlinear loads and can also improve the power factor. They are not often optimal filters because the passive filters are designed with the fixed load conditions. In this paper we proposed the method which only the necessary harmonic filters are operated by detecting the various harmonic current components. By the experimental results using the proposed system for the 500VA rectifier load, we concluded that the researched hybrid filter is cost effective and the performance is better than the passive filter.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.397-401
• /
• 2003

A resonant type voltage source and power device and a control method using Pulse Density Modulation(PDM) power control and Pulse Width Modulation(PWM) voltage control for plasma sterilization are described. For the stability of discharge in the generating tube, it is desirable that the peak apply voltage is constant The PDM power control is employed for sustaining the voltage constant at any generating tube input power. Moreover, to avoid the influence of input AC voltage fluctuation etc., PWM voltage control with generating tube peak voltage feedback is used. Both functions were confirmed by the experiment with 6.5[㎑], 1.8[㎾] inverter and generating tube. The effect of input synchronous PDM method for input current stabilizing is confirmed also.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.462-465
• /
• 2009

This study described the design and construction of uninterruptible power supply(UPS) system for supercomputering system. KISTI's supercomputer system is served for all 24 hours, and power be achieved in stable voltage and frequency range. We analyzed the electric power usage for 4 years, and we considered cost and stability and we contructed UPS for supercomputer system.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.321-323
• /
• 2009

When power failure occurs at multi-housing complex, auxiliary generator or emergency generator starts to provide power to households. This power is connected to emergency power ELB(Earth Leakage Breaker) at home distribution panel board and supplies power only for emergency light in living room but for heating system, refrigerator and other inevitable apparatuses that are in need of uninterruptible power. Since those domestic appliance are fed from common power line, they are inoperable during power failure. Our research is to resolve this problem by developing compatible relay-drive common/emergency-power ATS (automatic transfer switch) for home distribution panel board. In case of power failure, it transfers automatically and commences to provide power from emergency generator. Through this, Consumers can reach satisfaction where common power loads operate without any problem under both ordinary and power failure condition.

• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.40-48
• /
• 2015

In this paper, battery charging and discharging circuit with a single voltage power supply is proposed. The proposed circuit has the separated current path and charging-monitoring sequence control scheme. In the charging sequence, the proposed 2-level comparator combined with control signal of the micro-processor can control the constant charging current to protect the over current of the battery. Furthermore, the proposed circuit uses a periodic main power switch control to detect the discharging characteristics to estimate the approximated battery life-time. In the experiments, the proposed emergency power supply for emergency call system has 89% efficiency with 98% power factor. And the proposed sequence control scheme is well operated in the designed emergency power system.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.125-128
• /
• 2008

In this paper, the Transport Protocol Experts Group(TPEG) transmission and reception system based on Digital Radio Mondiale(DRM) is implemented for traffic information services. DRM stands for the European radio broadcasting standard to bring AM radio into digital radio, designed to work at frequencies below 30MHz. DRM can offer various data services such as text messages and a slide show service as well as audio services. In spite of low datarate, the TPEG system on DRM has an advantage that the traffic information service system for whole country can be established because DRM can offer wider service ranges than terrestrial-digital multimedia broadcasting(T-DMB) and simply archive a single frequency network.