• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.280-284
• /
• 1992

캠은 별다른 제어기 없이 제어가 쉽고 신뢰성이 높으며, 또한 고장이 적고 보수가 용이하기 때문에 자동선반과 같은 전용기계에서 많이 사용되고 있는 중요한 기계요소이다. 최근 정밀 고기능 부품에 대한 요구가 늘어남에 따라 자동선반의 캠 형상도가 정밀 복잡해지고 있다. 이에 따라 수동 캠 제작기로는 더 이상 정밀도나 생산성을 만족할 수 없게 되고, 캠 제작을 위해서 CAD/CAM기술을 도입하지 않을 수 없게 되었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.106-112
• /
• 2008

In this paper, It does the profile measurement of the cam of diesel engine SOHC of the actual object. It uses the measurement of run-out method. This method is that the surface of the object is measured by the sensor when the object rotate, and calculated and displayed by the computer the signal which acquired by sensor. When we acquire the signals, we have two error because of motion and contacting between cam and probe. In this paper, we compensate the motion error while simply liner equation. And we have a solution that we change the figure of probe when we have a contacting error. We compared the data measuring on developed automatic cam profile measuring system with the data measured on CMM.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.7-10
• /
• 2001

We have developed a prototype dedicated CAM system for machining a human bust that is not a relief. The input is STL file format, and the output is NC-codes for machining on a 3-axis general purpose CNC milling machine with an index table attached. Main modules are STL import, STL transformation, modeling jig/fixture, master model generation, and calculation of machining area. System architecture is proposed and main modules are briefly described. We adopted the angle between tool-axis and the surface normal vector to calculate machining area, and tested at several degrees.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.649-652
• /
• 2001

본 논문은 전용의 2D CAD 그래픽시스템으로 작성한 이미지를 양말에 나타내기 위한 편지컨트롤 시스템의 설계에 관한 연구이다. CAD 그래픽으로 자성된 2D 이미지 데이터를 입력데이터로 사용하고 편직과정에 나타내기 위해 캠을 제어하고 편직기의 동작 과정을 센서의 입력으로 감지하여 제어하는 시스템이다 8비트 MPU를 사용하여 전체의 컨트롤을 주관하는 메인CPU부와 공정의 진행사항 및 사용자와의 인터페이스를 위한 패널CPU부, 외부의 입출력을 위한 IO CPU부와 모터의 속도를 제어하기 위한 모터제어부로 구성되었다. 구현된 시스템은 고속의 편직에서도 필요한 패턴을 자유롭게 나타낼 수 있고 실시간으로 작업과정을 감시 제어할 수 있다. 또한 안정적이고 신뢰성을 갖는 자동화시스템의 실현으로 생산 및 운용상의 효율을 높일 수 있다.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.471-477
• /
• 2014

In this paper, we propose a low-cost license plate recognition system based on smart cam system using Android. The proposed system consists of a portable device and server. Potable device Hardware consists of ARM Cortex-A9 (S5PV210) processor control unit, a power supply device, wired and wireless communication, input/output unit. We develope Linux kernel and dedicated device driver for WiFi module and camera. The license plate recognition algorithm is consisted of setting candidate plates areas with canny edge detector, extracting license plate number with Labeling, recognizing with template matching, etc. The number that is recognized by the device is transmitted to the remote server via the user mobile phone, and the server re-transfer the vehicle information in the database to the portable device. To verify the utility of the proposed system, user photographs the license plate of any vehicle in the natural environment. Confirming the recognition result, the recognition rate was 95%. The proposed system was suitable for low cost portable license plate recognition device, it enabled the stability of the system when used long time by using the Android operating system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.259-266
• /
• 2016

In edentulous mandible, implant supported overdenture was considered as a first treatment option. Konus type attachment supplies rigid support and cross arch stabilization so that more favorable force transmission and distribution can be attained. In the dentistry, computer aided design-computer aided manufacturing (CAD-CAM) system makes it possible to fabricate restorations with high precision and effectiveness. Recently, Palladium-silver (Pd-Ag) alloy which is millable has been developed. This article presents that application of CAD-CAM Konus type attachment can be provide satisfactory stability and function on four-implant supported mandibular overdenture.

• The KIPS Transactions:PartB
• /
• v.16B no.4
• /
• pp.309-318
• /
• 2009

The researches on the system that automatically records and retrieves one's everyday life is relatively actively worked recently. These systems, called personal memex or life log, usually entail dedicated devices such as SenseCam in MyLifeBits project. This research paid attention to the digital devices such as mobile phones, credit cards, and digital camera that people use everyday. The system enables a person to store everyday life systematically that are saved in the devices or the deviced-related web pages (e.g., phone records in the cellular phone company) and to refer this quickly later. The data collection agent in the proposed system, called MyMemex, collects the personal life log "web data" using the web services that the web sites provide and stores the web data into the server. The "file data" stored in the off-line digital devices are also loaded into the server. Each of the file data or web data is viewed as a memex event that can be described by 4W1H form. The different types of data in different services are transformed into the memex event data in 4W1H form. The memex event ontology is used in this transform. Users can sign in to the web server of this service to view their life logs in the chronological manner. Users can also search the life logs using keywords. Moreover, the life logs can be viewed as a diary or story style by converting the memex events to sentences. The related memex events are grouped to be displayed as an "episode" by a heuristic identification method. A result with high accuracy has been obtained by the experiment for the episode identification using the real life log data of one of the authors.