• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.7-13
• /
• 2021

In this paper, the function of starting the negative voltage used in the IT equipment when it is generated and the method of controlling it using a microcontroller for the function to detect the overload and respond to it are presented. To do this, the limitations of the existing negative voltage generation circuit and the problems that occur during overload were analyzed, and a circuit that detects and controls the overload condition without a separate current sensing circuit was presented. In order to confirm the effect of the proposed method, an experiment was conducted by configuring an experimental circuit. As a result of the experiment, compared to the existing negative voltage generation circuit, which falls into a latch-up state when overloaded and enters a dangerous state, the proposed circuit detects this, stop the operation of the circuit, and informs the user of such an abnormal state to take action. have. In addition, since the starting point of the circuit is determined according to the system state, the experimental result was confirmed that the starting time was significantly shortened by about 23% compared to the time switch method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.677-679
• /
• 2005

최근 나노입자를 이용하는 광전 화학전지(PEC, Photoelectrochemical)인 염료감응형 태양전지(DSC)의 효율이 증가함에 따라 DSC 태양광 발전 시스템의 성능 개선 또한 요구되어진다. 본 연구에서는 Fly-Back DC-DC 컨버터(변화비율1:10)를 이용하여 DSC셀의 전압을 DC 300V로 승압시켰다. 또한 풀브릿지 인버터를 사용하여 AC 220V, 60Hz의 출력전압을 얻었다. 연구에서 제안한 회로는 높은 효율의 동작특성과 간단한 제작, 낮은 제조비용, 그리고 안정성을 추구한다. 또 다른 주요점은 부하단에서 Feed back을 받아 동작을 컨트롤하는 것이다. 부하단의 출력 전압과 전류를 Feed back 받아서 DSP320LF2406을 A/D기능을 사용하여 실시간으로 부하의 변화에 대처하여 컨버터와 인버터의 동작을 제어한다.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.2
• /
• pp.161-166
• /
• 2006

In this paper, we describe the RLG current stabilizer circuit for attitude control in the satellite. The RLG makes use of the Sagnac effect within a resonant of a HeNe laser. The difference between two discharge currents causes one of the gyro bias errors. The theoretical background and current stabilizer are introduced. It is verified that the circuit designed is applicable to the test of input voltage and temperature.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.481-487
• /
• 2009

This paper proposes a regulation method of DC line voltage for urban transit system fluctuated during the acceleration or deceleration by using supercapacitor. Supercapacitor is modelled electrically under the assumption of three different time constants of RC circuits with variable capacitances depending on the voltage. And its parameters are determined by the experimental measurements. The energy storage system using supercapacitors is installed based on this model, and the proposed model is tested through the simulations and experiments, and the controller for charging and discharging is designed. Finally, it is tested at Kyoungsan test site for the urban light rail road system and the energy saving effect is evaluated economically.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.27-33
• /
• 2016

This paper proposes a Low Noise Amplifier (LNA) with chopper stabilization technique with a sample-hold circuit. Chopper stabilization technique is effective in terms of reducing low frequency offset and flicker noise. Conventional chopper amplifier has a disadvantage in area because of using Low Pass Filter (LPF) for remove chopping spike. The proposed chopper amplifier employed sample and hold technique to decrease chopping spike instead of LPF that improves 36% in voltage damping and 11% in area.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.520-523
• /
• 2016

This paper describes a DC-DC converter with MPPT control for thermoelectric energy harvesting. The designed circuit converts low voltage harvested from a thermoelectric generator into higher voltage for powering a load. A start-up circuit supplies VDD to a controller, and the controller turns on and off a NMOS switch of a main-boost converter. The converter supplies the boosted voltage to the load through the switch operation. Bulk-driven comparators can do the comparison under low voltage condition and are used for voltage regulation. Also, bulk-driven comparators raise system's efficiency. A peak conversion efficiency of 76% is achieved. The proposed circuit is designed in a 0.35um CMOS technology and its functionality has been verified through simulations. The designed chip occupies $933um{\times}769um$.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.528-529
• /
• 2015

본 논문은 DC-DC 플라이백 컨버터 회로를 바탕으로, 고전압 입력으로부터 다채널의 절연된 저전압을 출력하는 고압 SMPS에 관한 것이다. 제안된 토폴로지는 고전압을 분배하는 커패시터와 MCU 전용의 커패시터를 직렬로 구성하고, 각 커패시터에 분배된 전압을 입력으로 다중여자 방식의 플라이백 컨버터 구조로 되어있다. 직렬 커패시터 구조는 고압환경에서의 소자들의 절연 및 전압스트레스를 저감할 수 있으며, MCU 전용의 커패시터는 시스템의 초기구동을 위한 자가충전(Self-Power) 및 Black-Start의 시스템 안정화 구조이다. 또한 다중여자방식은 변압기의 단일 코어를 사용하여 스위칭 전류를 흘려줌으로서 커패시터의 전압불균형을 막을 수 있는 장점을 가지고 있다. 제안된 토폴로지는 시뮬레이션을 통하여 타당성을 검증하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.1-5
• /
• 2009

A new pixel circuit for Active Matrix Organic Light Emitting Diodes (AMOLEDs), based on the polycrystalline silicon thin film transistors (Poly-Si TFTs), was proposed and verified by SMART SPICE simulation. One driving and six switching TFTs and one storage capacitor were used to improve display image uniformity without any additional control signal line. The proposed pixel circuit compensates an inevitable threshold voltage variation of Poly-Si TFTs and also compensates the degradation of OLED at low power supply voltage($V_{DD}$). The simulation results show that the proposed pixel circuit successfully compensates the variation of OLED driving current within 0.8% compared with 20% of the conventional pixel circuit.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.100-106
• /
• 1999

A new IBC(Island Body Contact) structure is introduced to SOI CMOS VLSI for stabilizing the body potential of the MOSFET without the additional area consumption. The improvement of the body contact effect is achieved by reducing the body resistance and the area is saved as the bodies of the MOSFETs are connected together. Its property as VLSI device is confirmed through the device simulations and the measurement.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.169-170
• /
• 2015

본 논문은 Forward Converter방식의 DC/DC 컨버터 회로를 기반으로, 1000[V]급에 해당하는 고전압 입력으로부터 절연된 저전압을 출력하는 고압SMPS에 관한 것이다. 제안된 토폴로지는 고전압을 분배하는 커패시터와 MCU 전용의 커패시터를 직렬로 구성하고, 각 커패시터에 분배된 전압을 입력으로 다중여자 방식의 컨버터 구조로 되어있다. 직렬 커패시터 구조는 고압환경에서 각 소자들의 절연 및 전압스트레스를 저감할 수 있으며, 제어기 전용의 커패시터는 시스템의 초기구동을 위한 자가충전 (Self-Power) 및 Black-Start의 시스템 안정화 구조이다. 또한 각 모듈에 연결된 모든 DC/DC컨버터 출력이 하나의 변압기에 연결되는 구조를 취하고 있어 Passive방식의 단일 코어를 갖는고주파 변압기를 통하여 자속을 공유함으로 밸런싱이 가능하다. 따라서 본 논문에서 제안된 공진회로는 PISM을 이용한 시뮬레이션과 실험을 통해 제안된 알고리즘의 타당성과 우수성을 검증하였다.