• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.37-40
• /
• 2002

본 논문에서는 MISO(Multiple-Input Single-Output) 시스템에서 시공간 블록 부호(Space-Time Block Code; STBC)와 전송 고유빔 형성기의 결합을 통해 전송 다이버시티 이득과 빔형성 이득을 동시에 추구하는 기법에 대해 설명하였다. 빔형성 이득을 대한 성능을 분석하기 위해 채널간 상관 정도에 따라 모의실험을 통해 성능을 분석하였다. 성능 분석 결과 일반적인 STBC 기법을 적용하는 기법보다 우수한 성능을 보임을 확인하였다

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.147-154
• /
• 2009

Antenna grouping algorithm is hybrid of beamforming and spatial multiplexing. In antenna grouping system, we partition $N_t$ transmit antennas into $N_r$ groups and use beamforming in a group, spatial multiplexing between groups. We can transmit $N_r$ data streams in the $N_t{\times}N_r$ antenna grouping system. With antenna grouping, we can achieve diversity gain through beamforming, and high spectral efficiency through spatial multiplexing. But if channel is ill-conditioned or there are some correlations between antennas, the performance of antenna grouping is seriously degraded and in that case, beamforming is the best transmit strategy. By selecting the antenna grouping mode when channel is well-conditioned and by selecting the beamforming mode when channel is ill-conditioned, we can prevent serious fluctuation of BER performance caused by varying channel condition and achieve the best BER performance. In this paper, we investigate mode selection algorithm which can select antenna grouping mode or beamforming mode. we also propose a simple mode selection criterion.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.3-8
• /
• 2013

Conventional MMSE beamforming scheme shows better performance than ZF or MF beamforming, but it does not aim increase of sum rate. This paper proposes sum rate maximizing scheme by representing sum rate as a function of weighted MSE. Proposed scheme increases sum rate iteratively by updating weights and beam whose initial form is conventional MMSE beam. Simulation result shows sum rate of proposed scheme is higher than those of conventional schemes and increases as the number of users increases.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2014

In this paper, we propose a novel UE(User Equipment) position tracking algorithm of visible light signals, and analyze BER performance when optical beamforming scheme is applied in VLC(Visible Light Communications) system. The optical beamforming scheme as an interference mitigation method provides good optical channel conditions between UE(Rx) and LED light(Tx), and lead to better BER performance because UE is able to get a better RSSI(Received Signal strength indication) value. For the system BER, the proposed UE position tracking method for optical beamforming transmission demonstrates the performance enhancement compared to a system not applied the optical beamforming transmission scheme, and up to about 5~6dB SNR performance gain is achieved. The results of the paper can be applied to design of various VLC and LBS applications for ubiquitous home network systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8A
• /
• pp.827-835
• /
• 2007

In this paper, the extension method of data transmission range as adapting AAS(Adaptive Antenna Systems) in ECMA(European Computer Manufacturers Association) standard MB-OFDM(MultiBand-Orthogonal Frequency Division Multiplexing) UWB systems is proposed, and the complementary beamforming method which can solve hidden beam problem when we adapt AAS in CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) systems is proposed. To design the complementary beamforming, Gram-Schmidt orthogonalization is utilized, whose beam pattern exhibits perfect nulling at the main beam angles and provides uniform power for detection of channel utilization out of main beam. The proposed method can be utilized with any arbitrary beamforming when we make main beamforming. Through computer simulation, it can be shown that proposed AAS and complementary beamforming increase data transmission range from 2m to 3.95m in 480Mbps data transmission system and increase throughput about 20% as compared with general UWB AAS systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.386-394
• /
• 2010

In this paper, we propose an adaptive coordinated Tx-Rx beamforming scheme for inter-user interference cancellation, when a BS communicates with multiple users that each has multiple receive antenna. The conventional coordinated Tx-Rx beamforming scheme uses a fixed multi-stream per user regardless of the instantaneous channel states, that is, both user with ill-conditioned and well-conditioned channels have the same number of data streams. However, in the proposed adaptive coordinated Tx-Rx beamforming scheme, we select the number of streams per user to solve the inefficient problem of the conventional coordinated Tx-Rx beamforming. As a result of applying the adaptive coordinated Tx-Rx beamforming scheme, the BER performance is improved. Simulation results show that the proposed algorithm outperforms the conventional coordinated Tx-Rx beamforming algorithm by 2.5dB at a target BER of $10^{-2}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.318-324
• /
• 2011

In this paper, three coordinated random beamforming (CRBF) schemes are analyzed in a two-cell symmetric interference channel. A simple partial coordination of RBF with base station selection (BSS) is shown to achieve the same average sum rate performance of CRBF with joint encoding (JE). To improve the sum rate performance further, we also propose a transmission mode selection (TMS) between the BSS and JE which is shown to have additional sum rate gain for the large number of users. Simulation results verify the eectiveness of the proposed CRBF schemes and accuracy of the proposed analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1903-1913
• /
• 2016

In this paper, we propose 2-stage beamformer with linear receiver in wireless backhaul downlink system where macro base station has large antenna array with sub-array structure. Also, to compare the system capacity, we apply 3-stage beamformer with zero-forcing precoder and calculate the achievable sum rate of received small cell base stations. Considering scattering and path-loss property of wireless backhaul channel, we combine precoding technique for spatial multiplexing and beamforming technique to overcome path-loss. Therefore, we design DFT-based fixed beam patterns for the first stage. The simulation results show that considering spatial multiplexing, proposed 2-stage beamformer with linear receiver can increase the achievable sum rate as well as reduce the feedback information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1133-1139
• /
• 2012

In this paper, hybrid mode beamforming (HMB) which allows simultaneous transmission of joint beamforming and disjoint beamforming is proposed. HMB is proven to be asymptotically optimal beamforming for sum rate growth. Extensive simulations show that HMB achieves nearly the same performance as joint encoding (JE) in symmetric interference channel. It is also shown that it outperforms JE in a more realistic asymmetric interference channel environment, though it still experiences some performance degradation due to power inefficiency of joint beamforming in asymmetric channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.449-456
• /
• 2018

Herein, several multibeam forming methods that can be applied to microwave wireless power transmission are presented. Because the conventional multibeam forming methods do not consider an active element pattern(AEP), an intended beam shape will contain a steering angle error when applied to an actual system. To solve this problem, a method of considering the average of the AEP and a method of considering all the AEPs by the modified Fourier series method have been proposed. We confirmed that the proposed method reduces the error with the intended beam shape in the multibeam formation. In addition, for the side lobe level(SLL) and null control, a method of multibeam forming by applying the superposition principle to the Dolph-Tschebyscheff method is proposed. We also confirmed that SLL control can be simultaneously achieved with the multibeam formation.