• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.400-408
• /
• 2018

Wide area augmentation system is a system that generates and transmits correction and Integrity information for use in wide area. Typical system is SBAS. In the United States, it operates under the name WAAS, EGNOS in Europe, MSAS in Japan, SDCM in Russia, GAGAN in India. it is developing Korean SBAS which named KASS by 2022 in Korea. SBAS is a standard System that is operated as civil aviation service base and set as international standards by ICAO. So the correction data can only is used for civil SPS receiver. In this paper, we discuss C1P1 DCB estimation which need to use SPS correction service for PPS receiver. Then we analyze C1P1 DCB correction effect under standalone Satellite Navigation and method to use PPS receiver under SPS DGPS. Finally we organize wide area augmentation system for PPS receiver and analysis performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.244-250
• /
• 2018

Multilateration acquires the transponder signal of target from receivers installed on the ground and calculates the position of the target using the difference of the signal acquisition time of each receiver. One of the factors that influence the positioning accuracy of Multilateration using the TDOA calculation method is the error due to the precision measurement of signal input time. When measuring the signal input time at the receiver, the input signal is sampled using the reference clock of the receiver and a reference sample having the same sampling rate is applied to the cross correlation technique. Therefore, the accuracy of the signal input time is proportional to the reference clock. In this paper, the algorithm for precisely measuring the signal input time by performing cross correlation between the input signal of the receiver and DRS(Delayed Reference Sample) is proposed. In order to verify this, we implemented the pulse signal of the transponder that is transmitted from the target using Matlab. Through the simulation, cross correlation between the proposed DRS and the input signal was performed. From this result, the performance of the precise measurement of signal input time was analyzed.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1017-1024
• /
• 2002

According as mobile computing environment is generalized by development of wireless networking technology and communication device, mobile host uses local cache for extensibility and early response time. and reduction of limited bandwidth. This time, between mobile host and mobile support station cache need consistency interested person of done data accordingly much techniqueses propose. Existent consistency techniques because detection based techniqueses are used mainly and broadcast periodic invalid message considering frequent disconnection. However, these techniqueses increase abort step through increase or delay of transmission message number by accuracy examination of data. Therefore, because mobile host deletes cached data, and extensity are decreased. Techniques that is proposed in this paper did to perform refering update frequency about object that page request or when complete update operation happens to solve these problem. Therefore, have advantage that response is fast because could run write intention declaration or update by update frequency electively asynchronously when update operation consists and abort step decreases. Also, improved extensity running delete or propagation electively according to update frequency about periodic invalid message gone since disconnection.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.7
• /
• pp.413-420
• /
• 2006

The speed of present-day network technology exceeds a gigabit and is developing rapidly. When using TCP/IP in these high-speed networks, a high load is incurred in processing TCP/IP protocol in a host CPU. To solve this problem, research has been carried out into TCP/IP Offload Engine (TOE). The TOE processes TCP/IP on a network adapter instead of using a host CPU; this reduces the processing burden on the host CPU. In this paper, we developed two software-based TOEs. One is the TOE implementation using an embedded Linux. The other is the TOE implementation using Lightweight TCP/IP (lwIP). The TOE using an embedded Linux did not have the bandwidth more than 62Mbps. To overcome the poor performance of the TOE using an embedded Linux, we ported the lwIP to the embedded system and enhanced the lwIP for the high performance. We eliminated the memory copy overhead of the lwIP. We added a delayed ACK and a TCP Segmentation Offload (TSO) features to the lwIP and modified the default parameters of the lwIP for large data transfer. With the aid of these modifications, the TOE using the modified lwIP shows a bandwidth of 194 Mbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1631-1636
• /
• 2015

With the advance of wireless communication technology in terrestrial area, underwater communication is also evolving very fast from a simple point-to-point transmission to an elaborate networked communications. Underwater acoustic channel has quite different features comparing with the terrestrial radio channel in terms of propagation delay, Doppler shift, multipath, and path loss. Thus, existing technologies developed for terrestrial communication might not work properly in underwater channel. Especially medium access control (MAC) protocols which highly depend on propagation phenomenon should be newly designed for underwater network. CSMA/CA has drawn lots of attention as a candidate of underwater MAC protocol, since it is able to resolve a packet collision and the hidden node problem. However, a received signal could be degraded by the interferences from the nodes locating outside the receiver's propagation radius. In this paper, we study the effects of interference on the CSMA/CA based underwater network. We derived the SNR with the interference using the sonar equation and analyzed the degradation of the RTS/CTS effects. These results are compared with the terrestrial results to understand the differences. Finally we summarized the design considerations in CSMA/CA based underwater network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1133-1141
• /
• 2009

In this paper, we present a distributed fault-tolerant topology control protocol that configure a wireless sensor network to achieve k-connectivity and (k+1)-coverage. One fundamental issue in sensor networks is to maintain both sensing coverage and network connectivity in order to support different applications and environments, while some least active nodes are on duty. Topology control algorithms have been proposed to maintain network connectivity while improving energy efficiency and increasing network capacity. However, by reducing the number of links in the network, topology control algorithms actually decrease the degree of routing redundancy. Although the protocols for resolving such a problem while maintaining sensing coverage were proposed, they requires accurate location information to check the coverage, and most of active sensors in the constructed topology maintain 2k-connectivity when they keep k-coverage. We propose the fault-tolerant topology control protocol that is based on the theorem that k-connectivity implies (k+1)-coverage when the sensing range is at two times the transmission range. The proposed distributed algorithm does not need accurate location information, the complexity is O(1). We demonstrate the capability of the proposed protocol to provide guaranteed connectivity and coverage, through both geometric analysis and extensive simulation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.162-168
• /
• 2014

The OFDM system have been widely studied for the purpose of increasing data rate with more reliable communications in underwater channel environments. And it is possible only when the sub-carrier's bandwidth is smaller than the coherence bandwidth of channel in the underwater OFDM communication system. However, the size of the FFT for the OFDM system will be increased because the coherence bandwidth is as small as several tens of Hz in real underwater channel environments. Also, It is necessary to add a CP having a length longer than the rms delay spread of a channel. So the complexity of the system is increased and the data efficiency is reduced. Therefore, in this paper, we have studied the increase of the coherence bandwidth by adapting the beamforming technologies. To do this, we have collected data from real underwater channel environments and analyzed the coherence bandwidth when adapting the beamforming technologies. Analyzing the experimental data show that the coherence bandwidth by the beamforming technologies in underwater channel environments was greatly increased compared to that of a single sensor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1749-1757
• /
• 2010

This paper considers the cost minimization problem to satisfy QoS (Quality of Service) requirements for a given network, in particular when communication resources to each link can be additionally assigned. For the purpose of quantifying QoS requirements such as data transfer delay and packet loss, we introduce the cost function considering both the link utilization factor and the additionally assigned resource. To minimize this cost function, we firstly formulate a Basic Capacity Planning (BCP) problem, a special case of Network Utility Maximization (NUM). We show that the solution of this BCP problem cannot be optimal via a counter example. In this paper, we suggest the cross-layer design of both additionally assigned resource and routing path, whose initial values are set to the result of BCP problem. This cross-layer design is based on a heuristic approach which presents an effective way to plan how much communication resources should be added to support the QoS requirements in future. By simulation study, we investigate the convergence of the cost function in a more general network topology as well as in a given simple topology.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.1
• /
• pp.47-54
• /
• 2011

The remote control mobile robot is the robot accomplishing a task according to the orders giving by a user through departed communication system using a joystick. Basically, to supply a lot of information, as this type of robot uses visual information, the user can check the transmitted information by eyes and give orders to the robot. But the weak point of this type of robot is that it has a possibility to come into a collision with an obstacle not be seen to the user because of the communication delay occurring in a communication system and dead zone happening in visual information. To solve the problem, in this paper, we try to suggest a system applying a fuzzy control system to the robot to avoid collision with an obstacle by an immediate order of the user. The fuzzy control system has better performance than any other existing control methods in the change of noise and parameter. And it is more efficient than any other since it solves easy the complexity of the system analysis occurring because of the nonlinear feature of the mobile robot system. In this paper, we made experiments how the mobile robot controlled by the fuzzy control system avoids an obstacle, tracks the path and avoids the obstacle in the path, to prove the performance and to check the evaluation and the application possibility of the fuzzy control system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.138-145
• /
• 2007

Wireless transmission system using the multipath channel is affected ISI due to the delay spread. So we use a decision feedback equalizer which consist of decision part and feedback filter for remove the ISI effectively. In this paper, we propose a improved adaptive decision feedback equalizer to mitigate ISI effectively. The proposed adaptive decision feedback equalizer is construct by using soft decision device and hierarchical feedback filter based on MMSE sub-optimal equalizer using the LMS algorithm. Soft decision device mitigate the error propagation in feedback filter by incorrectly detected decision symbol and feedback filter which is divided two step independently mitigate the ISI by using a adaptive algorithm. As a result this structure shows better performance than conventional decision feedback equalizer by mitigating the error propagation in filter cause incorrectly detecting symbol. and we get the MSE more rapidly by using larger step-size due to reduce the number of feedback filter tap. In computer simulation, we compare the bit error rate performance of proposed decision feedback equalizer with conventional one on the S-V channel model for UWB system.