• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.101-113
• /
• 2008

The new wireless multimedia environment is coming because of the variety of an user requirement and a traffic increase which we can not accept in the IMT-2000 present systems. To offer the wireless multimedia service the world wireless communication company which included the ITU-R is developing the standard and technique of 4G systems. We analyzed the technique criteria of the 4G wireless communication system in this paper which is based on that of WiBro System. The mobile communication traffic is predicted Up/Down-link of non-symmetric in the future. And we proposed the PHY layer parameters of occupied frequency bandwidth of Up/Down-link with both 1:3 and 1:6. And we verified this through the simulation. So we proposed the technique criteria for 4G wireless communication in this paper.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.257-267
• /
• 2014

Distributed compressive video sensing (DCVS) is a low cost sampling paradigm for video coding based on the compressive sensing and the distributed video coding. In this paper, we propose using a skip-mode coding in DCVS under the assumption that in case of high temporal correlation, temporal interpolation can guarantee sufficiently good quality of nonkey frame, therefore no need to transmit measurement data in such a nonkey frame. Furthermore, we extend it to use a hierarchical structure for better temporal interpolation. Simulation results show that the proposed skip-mode coding can save the average subrate of whole video sequence while the PSNR is reduced only slightly. In addition, by using the proposed scheme, the computational complexity is also highly decreased at decoder on average by 43.75% for video sequences that have strong temporal correlation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.526-531
• /
• 2014

Vehicular communications have been receiving much attention in intelligent transport systems(ITS) by combining communication technology with automobile industries. In general, vehicular communication can be used for vehicle-to-vehicle(V2V) and vehicle-to-infrastructure( V2I) communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environment(WAVE). WAVE system transmits signal in 5.835~5.925 GHz frequency band with orthogonal frequency division multiplexing(OFDM) signaling. In this paper, after 32 bit processed the channel monitoring in MAC(Media Access Control) layer of WAVE system implemented according to IEEE 802.11p standard, data were received and we evaluated the performance, we built the test bed consisting of OBU(On Board Unit) in the real expressway. We transmitted WSM(WAVE Short Message) and received WSM between OBU wirelessly. And then, we calculated channel occupancy time per one frame and throughput, and evaluated the performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.763-770
• /
• 2014

In traditional routing protocols including LEACH for wireless sensor networks, nodes suffer from unbalanced energy consumption because the nodes require large transmission energy as the distance to the sink node increase. Multi-hop based routing protocols have been studied to address this problem. In existing protocols, each cluster head usually chooses the closest head as a relay node. We propose LEACH-CHT, in which cluster heads choose the path with least energy consumption to send data to the sink node. In our research, each hop, a cluster head selects the least cost path to the sink node. This method solves the looping problem efficiently as well as make it possible that a cluster head excludes other cluster heads placed farther than its location from the path, without additional energy consumption. By balancing the energy consumption among the nodes, our proposed scheme outperforms existing multi-hop schemes by up to 36% in terms of average network lifetime.

• Journal of Broadcast Engineering
• /
• v.9 no.3
• /
• pp.225-235
• /
• 2004

In this paper, we propose a new stereoscopic video coding approach for heterogeneous consumer devices by exploiting the concept of spatio-temporal scalability. The proposed method uses MPEG-2 standard for coding the left or main sequence and an enhanced compatible coding scheme for predicting the P- and B-type of frames of the right or auxiliary sequence. The enhanced compatible coding scheme predicts matching block by interpolating both two forward and backward motion predicted macroblocks and disparity predicted macroblock. To provide flexible stereo video service, we define both a temporally scalable layer and a spatially scalable layer for each eye-view. The experimental results show the efficiency of proposed coding scheme by comparison with already known methods and the advantages of disparity estimation in terms of scalability overhead. According to the experimental results, we expect the proposed functionalities will play a key role in establishing highly flexible stereo video service for ubiquitous computing environment where devices and network connections are heterogeneous.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.65-73
• /
• 2004

By the progress of communication and hardware technology, It is possible to organize wireless sensor nodes using the tiny sensor in recently. It is a critical aspect to minimize energy consumption for long-term lively sensor because wireless sensor nodes are associated with the available resources. The wireless sensor network is restricted in communication, exhaustion of power, and computation but it is very similar an Ad-Hoc network. Each sensor node products a few data and application layer of each sensor has slow transmitting feature. Unlike Ad-hoc, which is usually source or sink, base station of the each senor nodes works as sink and the other nodes except sink node works as source. Generally, wireless sensor network keep staying fixed state and observing circumstances continuously after setting up. It doesnt fit for the wireless sensor networks under functioning of existing ad-hoc networks because original Ad-Hoc network routing protocol couldnt operate for wireless sensor network features. This thesis propose the effective routing protocol way in the filed of the expanded routing protocol based on tree with considering on the characteristic of wireless sensor networks pattern.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3910-3922
• /
• 2000

Current power systems are distributed geographically and operated in the form of Energy Management System(EMS)/ Supervision Control and Data Acquisition(SCADA) with the aid of computers and communications. Recently a variety of utilities have had interests in using inforrration technology to bring the efficiency and low operational costs. There is also a trend to integrdte the production, transmission, distribution and management/control of power into one and unified distributed system. To this end, Electric Power Hesearch Institute(EPRI) announced a new standard communication protocol called Inter-Control Center Protocol(ICCP).ICCP specifies the use of Manufacturing Message Specification(MMS) for services required by rccr in application layer and supports the communications between heterogeneous control centers. This paper presents the characteristics of MMS,ICCP and their relationship. Futherrnore, we implement the basic functional blocks of ICCP using MMS services under TCI/IP environments. Finally, we model a simple power system and apply the rccp protocol to this system in a window-based scheme, and finally show the operation and validation of this protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1249-1259
• /
• 1998

This paper proposes an efficient channel assignment method for real-time service in the IEEE 802.11 Wireless LAN system, and analyzes the supportability to real-time service and the channel utilzation of that through computer simulations. The improved MAC(Medium Access Control) protocol employing the proposed channel assignment method achieved good throughput over contention period as well as contention-free period by making real-time terminals transmit the information about their desiring value before starts of data transmissions. For performance evaluation of the proposed method, a simulation analyzing the variation of allocated bandwidths to terminals using real-time service and their buffer sizes wasexecuted. Real-time data traffics was modeled s 7-stae transition VBR sources, and asynchronous data traffics modeled as Poisson processes. In the simulation, the proposed method showed smaller variation of the bandwidth of each terminal and samller buffer size than the existing method, and also recorded good throughput over contention period.

• Journal of Internet Computing and Services
• /
• v.6 no.3
• /
• pp.85-95
• /
• 2005

Whereas the traditional multicast schemes based on Mobile IP can support a limited number of very large multicast groups, the Xcast protocol can support a very large number of small multicast groups, In the Xcast, the source node encodes the list of destinations in the Xcast header. Therefore, the maximum packet size in the network limits the number of destinations that a Xcast packet may have. In this paper, an enhanced Xcast protocol is proposed to solve the multicast group size limitation of the existing Xcast protocol in providing multicast service for mobile nodes. Moreover, the SIP (a very flexible control plane protocol) is integrated with the proposed multicast scheme to provide mobility awareness on the application layer. The simulation results verify that the proposed multicast scheme not only increases the packet delivery ratio and the data packet forwarding efficiency but also achieves low latency of packets in the network.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.379-384
• /
• 2010

The service quality is one of the most important issue for successful deployment of IPTV services. Currently, a number of parameters have been reported that they have an effect on the quality of IPTV services. However, it is almost impossible to monitor and manage all the parameters in real time. Key parameters, therefore, should be chosen as a service metric for efficient quality management of IPTV services. For this purpose, we implement an environment for monitoring and measuring the quality of IPTV services and try to figure out the effect of each parameter on the quality of IPTV services. In particular, we focus on a parameter called continuous count error (CCE) measured at the level of MPEG transport stream (TS) and show that it has a greater effect on the quality of IPTV services than other parameters.