• Journal of KIISE:Information Networking
• /
• v.33 no.5
• /
• pp.395-406
• /
• 2006

In ad hoc networks, the limited battery capacity of nodes affects a lifetime of network Recently, a large variety of power-aware routing protocols have been proposed to improve an energy efficiency of ad hoc networks. Existing power-aware routing protocols basically consider the residual battery capacity and transmission power of nodes in route discovery process. This paper proposes a new power-aware routing protocol, TDPR(Traffic load & lifetime Deviation based Power-aware Routing protocol), that does not only consider residual battery capacity and transmission power, but also the traffic load of nodes and deviation among the lifetimes of nodes. It helps to extend the entire lifetime of network and to achieve load balancing. Simulations using ns-2[14] show the performance of the proposed routing protocol in terms of the load balancing of the entire network, the consumed energy capacity of nodes, and an path's reliability TDPR has maximum 72% dead nodes less than AODV[4], and maximum 58% dead nodes less than PSR[9]. And TDPR consumes residual energy capacity maximum 29% less than AODV, maximum 15% less than PSR. Error messages are sent maximum 38% less than PSR, and maximum 41% less than AODV.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.943-954
• /
• 2003

The mobile telecommunication system has been growing exponentially after 1990s due to the high population in a city and the growth of mobile user. In this time, the current mobile system mainly concentrates on the voice communication. However, in the next generation, mobile users want to get very diverse services via mobile terminal such as the Internet access, web access, multimedia communication, and etc. For this reason, the next generation system, such as the UMTS (Universal Mobile Telecommunication Services) system, has to support the packet data service and it will play the major role in the system. By the way, since the Web service is based on TCP, most of the Internet traffic TCP traffic. Therefore, efficient transmission of TCP traffic will take very important role in the performance of packet data service. There are many researches about improving TCP performance over wireless network. In those schemes, the UMTS system adapts the link layer retransmission scheme. However, there are rarely studies about the exact performance of the link layer retransmission scheme in the face of dynamic changes of wireless environment over the UMTS system. The dynamic changes of wireless environment, such as wireless bandwidth, can degrade TCP performance directly. So, in this paper, we simulate and analyze the TCP performance in the UMTS system with dynamic wireless environments. Then, we propose a simple scheme for minimizing TCP performance degradation. As a result of simulation, we can find that when wireless environment is changed dynamically, the probability of TCP timeout is increased, and the TCP performance is degraded very much. In this situation, the proposed simple scheme shows good performance. It saves wireless resources and reduces the degradation of TCP performance without large overhead of the base station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1150-1158
• /
• 2011

More than 100 Mbps rate is needed in the UBcN for a subscriber to receive broadband traffics with multi-channel like UDTV or 3DTV. Although the optical fiber is recently deployed for the FTTH, the UTP is the most widely used medium and will be used in UBcN age. Network providers may consider the 1000BASE-T or the vectorized VDSL if they adopts the UTP in the place where does not have optical fibers. But UTP should be expanded because 1000BASE-T and vectorized UTP needs 4 and 3 pairs cable, respectively while residential region has not exceeding 2 pair UTP cable. To solve the problem, we propose a 500BASE-T technology using 2 pairs UTP in this paper. The technology introduces a rate adaptation sublayer and a SERDES sublayer above and under the PCS, respectively. The rate adaptation sublayer is compatible for the GMII. Also, if we modify the SERDES sublayer, the technology can easily obtain 250BASE-T with 2 pairs UTP. We implement such functions with FPGA and analog board and verify the function of rate adaptation and symbol vector synchronization, and effective transmission rate by experiments. In particular, we show that link efficiency is increased by enable control in the rate adaptation sublayer.

• 전자공학회논문지 IE
• /
• v.48 no.1
• /
• pp.30-35
• /
• 2011

In this paper, we propose a method to improve the performance of initial channel estimation (CE) for the multiband-OFDM (MB-OFDM) UWB. The performance of the initial CE can be generally improved as increasing the number of the used preamble symbols. The MB-OFDM specification presents two CE symbols per band in preamble format. The performance of CE estimation with two CE symbols may be satisfied in relatively high sensitivity -77.5 and -72.5 dBm for 200 Mbps and 480 Mbps data rate, respectively, but can not be enough in the degraded 55 Mbps and 110 Mbps sensitivities such as -83.5 and -80.5 dBm, respectively. A method proposed in this paper achieves the performance improvement by extending CE estimation region to packet synchronization (PS) symbols and frame synchronization (FS) symbols including two CE symbols. This can improve the CE performance in the degraded SNR and increase the link-margin by reducing the error rate in physical-layer header. The link-margin improvement obtained by the proposed CE preamble can induce the decrease of error-rate in physical-layer header and increase of communication throughput. Simulation results for the proposed initial method show that the performance is improved by about 0.7 dB at 10-4 bit-error-rate using '4' symbols than initial method using only two CE symbols.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.2
• /
• pp.30-38
• /
• 2002

In this paper, we propose a new method for image coding which efficiently use the relationship between the properties of spatial image and its wavelet transform. Firstly, an original image is decomposed into several layers by the wavelet transform, and simultaneously decomposed into 2$^n$$\times$2$^n$blocks. Each block is classified into two regions according to their standard deviation, i.e., low activity region(LAR) and high activity region(HAR). The region with low frequency in spatial domain does not only appears as zero regions in wavelet frequency domain like HL, LH, and HH but also gives little influence to the quality of reconstructed image. The other side, the high frequency regions are related to significant coefficients which gives much influence to image reconstruction. In this paper, we propose a image coding method to obtain high compression rate at low bit rate by these properties. The LAR region is encoded by LAR coding method which is proposed in this paper, the HAR by a technique similar to bitplane coding in hierarchical tree. Simulation results show that th,$\boxUl$ proposed coding method has better performance than EZW and SPIHT schemes in terms of image quality and transmitted bit rates, can be successfully applied to the application areas that require of progressive transmission.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.811-815
• /
• 2005

IPSec(Internet Protocol Security) is a framework for a set of protocols for security at the network or packet processing layer of network communication. IPSec is providing authentication, integrity and confidentiality security services. The specifications for Internet Key Exchange(IKEv1) were released to the world. Some criticisms of IKEv1 were that it was too complex and endeavored to define too much functionality in one place. Multiple options for multiple scenarios were built into the specification. The problem is that some of the included scenarios are rarely if ever encountered. For IPsec to work, the sending and receiving devices must chare a Public Key. This is accomplished through a protocol known as Internet Security Association and Key Management Protocol/Oakley(ISAKMP/Oakley), which allows the receiver to obtain a public key and authenticate the sender using digital certificates. This thesis is a study on the performance improvement of the security transmission using the SSFNet(Scalable Simulation Framework Network Models)

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3262-3271
• /
• 2000

Continuous media objects, due to large volume and real-time consiraints in their delivery,are likely to consume much network andwidth Generally, proxy servers are used to hold the fiequently requested objects so as to reduce the network traffic to the central server but most of them are designed for text and image dae that they do not go well with continuous media data. So, in this paper, we propose a two-layered network cache management policy for continuous media object delivery on the wide area networks. With the proposed cache management scheme,in cach LAN, there exists one LAN cache and each LAN is further devided into a group of sub-LANs, each of which also has its own sub-LAN eache. Further, each object is also partitioned into two parts the front-end and rear-end partition. they can be loaded in the same cache or separately in different network caches according to their access frequencics. By doing so, cache replacement overhead could be educed as compared to the case of the full size daa allocation and replacement , this eventually reduces the backbone network traffic to the origin server.

• Journal of KIISE:Software and Applications
• /
• v.30 no.10
• /
• pp.925-937
• /
• 2003

The input of digital TV software is the Transport Stream, which utilizes the moving picture compression technique, MPEC-2 (Moving Picture Experts Groups-2). MPEG-2 TS consists of the complicated table hierarchy and internal relationships, as well as the various restrictions with regards to system standard of digital TV software in determining the field values of transport stream. However, the general MPEG-2 TS generation tool produces transport streams solely based on the MPEG-2 TS specification itself, and does not consider the interaction between modulo features or modules themselves, which construct digital TV software. In this paper, we propose a method to systematically generate MPEG-2 TS test data, namely‘Test Stream’, for digital TV software. We present the experiment result where the test stream derived from our developed tool according to the proposed method was applied to the actual digital TV software settop-box, and then analyze the result. Apart from other existing MPEG-2 TS generation tools, the advantage of our method is that not only is it capable of generating various levels of test streams including digital TV software module, integration, and system testing, but also detecting errors and analyzing their causes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1169-1176
• /
• 2000

In this paper, label assignment schemes considering the IP flow model for the efficient MPLS traffic engineering are proposed and evaluated. Based on the IP flow model, the IP flows are classified into transient flows and base flows. Base flows, which last for a long time, transmit data in high bit rate, and be composed of many packets, have good implications for the MPLS traffic engineering, because they usually cause network congestion. To make use of base flows for the MPLS traffic engineering, we propose two base flow classifiers and label assignment schemes where transient flows are allocated to the default LSPs and base flows to explicit LSPs. Proposed schemes are based on the traffic-driven label triggering method combined with a routing tabel. The first base flow classifier uses both flow size in packet counts and routing entries, and the other one, extending the dynamic X/Y flow classifier, is based on a cut-through ratio. Proposed schemes are shown to minimize the number of labels, not degrading the total cut-through ratio.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.1014-1024
• /
• 1998

This paper describes the implementation of the asymmetric digital subscriber lines(ADSL) interface device function in ATM networks. The function of the ADSL interface devices has been achieved within a type of the ATM switch standard board. The board connected with the ADSL modem process the ATM physical layer function of data transfering asymmetrically. For the implementation of the board, we have modeled a worst case of the subscriber line conditions from the existing investigated results on the impairments such as crosstalk, impulse noise, and some important noises loaded to subscrber line. Also we have performed assessment tests in the full test environments. We have found that the board is met to the standard specification in condition with various test loops and the worst line conditions using an ADLS line simulator. And we confirmed that high-speed multimedia services are performed well with the ATM switch and the ADSL subscriber line. It is evaluted that this board can be used for high quality ADSL services through existed copper subscriber line.