• 한국가시화정보학회지
• /
• 제20권2호
• /
• pp.63-69
• /
• 2022

In this study, we numerically simulate the condensational growth of micron-sized particles traveling through a pipe filled with humidified air. Using the finite volume method and Lagrangian particle tracking technique, the mixture of particle-laden flow with moist air in a T-juction pipe is simulated. The condensational growth of particles is calculated by considering the mass transfer of vapor in the air onto the particle surface. The results indicate that the growth rate of the particles increases as the relative humidity of air is higher. Furthermore, the placement of a porous media with low permeability in the pipe could enhance the degree of condensational growth.

• 한국전산유체공학회지
• /
• 제8권1호
• /
• pp.30-37
• /
• 2003

The post-processor for two-dimensional flow visualization has been developed by using OOP(object-oriented programming) of Visual C++. User-friendly GUI(graphic user interface) has been built on the base of MFC(Microsoft Foundation Class). The number and order of variables can be specified by user because the input style is the free-format. The new variable can be defined and added to the variable list by using the various operators and functions.

• 전산구조공학
• /
• 제32권4호
• /
• pp.4-10
• /
• 2019

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.457-462
• /
• 1998

유동장에서의 기포거동 정보의 중요성 때문에 이를 정확히 측정하기 위한 실험방법이 여러 가지로 발전해 왔지만 아직까지도 기포분포에 대한 정확한 정보 추출에는 도달하지 못하고 있다. 본 연구에서는 원래 의공학분야에서 새로운 tomography 기술로 연구되고 있는 EIT(Electrical Impedance Tomography) 기술을 2상유동에서의 기포분포 측정방법 개발에 적용하기 위한 기초연구와 기포분포 가시화를 위한 전산실험을 수행하였다. 기포분포 가시화를 위해서는 EIT inverse problem solver로 많이 사용되는 iNR(improved Newton-Raphson) 계열의 EIT 염상복원 프로그램을 본 연구진이 유전알고리즘(Genetic Algorithm)과 fuzzy-based mesh grouping 방법을 추가하여 개선한 영상복원프로그램을 사용하였다. 전산실험 결과 본 영상복원프로그램으로는 12$\times$12의 분해능으로 모사되는 기포분포를 저항률 오차한도 $\pm$1%의 신뢰도로 PC상에서 복원이 가능함을 확인하였다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.66-70
• /
• 2007

현재 많은 연구들이 작은 크기에 여러 공정을 집적시킬 수 있는 장점을 가진 마이크로 장치의 개발과 활용에 집중되고 었다. 마이크로 장치에서 가장 중요한 것은 미세 유동의 효율적인 제어이다. 본 연구에서는 마이크로 장치에 직접 적용 가능한 표면 개질 된 마이크로 채널의 유동에 대하여 고려하였다. 표면 개질(surface treatment)은 물리적, 화학적인 작용을 통해서 채널 내부 표면의 습윤성을 변화시켜 유동을 제어하는 방법이다. 친수성(glass)을 가지는 마이크로 채널 내부의 일부를 소수성(teflon)으로 개질 후, 고속카메라를 이용하여 채널 내부를 흐르는 유체의 유동 경계면 변화를 분석하였다. 또한 유동 해석을 위한 상용 코드(CFD-ACE)를 이용하여 유동에 대한 수치 해석을 진행하여 가시화된 실험 결과와 비교 분석하였다. 실험 결과와 수치 해석 결과를 통해, 친수성과 소수성 표면 배열에 따른 일시적인 유동 변화를 관찰하였다. 본 연구 결과를 통해 마이크로 채널 유동의 최적화 상태를 찾을 수 있으며, 보다 용이한 미세 유동 제어가 가능하다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.14-17
• /
• 2008

Recently, several advanced flow visualization techniques such as Particle Image Velocimetry (PIV) including stereo PIV, holographic PIV, and dynamic PIV have been developed. These advanced techniques have strong potential as the experimental technology which can be used for verifying numerical simulation. In addition, there would be indispensable in solving complicated thermo-fluid flow problems not only in the industrial fields such as automotive, space, electronics, aero- and hydro-dynamics, steel, and information engineering, but also in the basic research fields of medical science, bio-medical engineering, environmental and energy engineering etc. Especially, NT Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is difficult for conventional methods to observe most complicated nano- and bio-fluidic phenomena. In this paper, the basic principle of these advanced visualization techniques and their practical applications which cannot be resolved by conventional methods, such as flow in automotive HVAC system, ship and propeller wake, three-dimensional flow measurement in micro-conduits, and flow around a circulating cylinder will be introduced.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.14-17
• /
• 2008

Recently, several advanced flow visualization techniques such as Particle Image Velocimetry (PIV) including stereo PIV, holographic PIV, and dynamic PIV have been developed. These advanced techniques have strong potential as the experimental technology which can be used for verifying numerical simulation. In addition, there would be indispensable in solving complicated thermo-fluid flow problems not only in the industrial fields such as automotive, space, electronics, aero- and hydro-dynamics, steel, and information engineering, but also in the basic research fields of medical science, bio-medical engineering, environmental and energy engineering etc. Especially, NT (Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is difficult for conventional methods to observe most complicated nano- and bio-fluidic phenomena. In this paper, the basic principle of these advanced visualization techniques and their practical applications which cannot be resolved by conventional methods, such as flow in automotive HVAC system, ship and propeller wake, three-dimensional flow measurement in micro-conduits, and flow around a circulating cylinder will be introduced.

• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.39-45
• /
• 2010

The optimal design is needed for the blade geometry of the quad-rotor blades which is mainly used for Unmanned Aerial Vehicle. To do this, it is important to analyze the wakes under the blades. In the present study, the flow around the rotating blades was analyzed using PIV(Particle Image Velocimetry) and CFD(Computational Fluid Dynamics). The maximum axial velocity was measured at about 60% position toward the radial direction of the blade. The positions of vorticities in the test section obtained by PIV and CFD were turned out to be almost alike. The values in the difference of pressure coefficients at the upper and the lower blades were increased depending on the radial direction. Then, the values were decreased at the blade tip. The data of the flow analysis in the present study are expected to be served as the design of blades and ducts for the thrust improvement in the future.

• 한국가시화정보학회지
• /
• 제11권3호
• /
• pp.5-11
• /
• 2013

It is of great importance to obtain the uniform layer thickness in the multi-layer co-extrusion processes. In the present study, the three-dimensional numerical simulation was carried out using the open source code named OpenFOAM(R) to understand the flow characteristics in the multi-layer die. In this numerical study, Multi-thin-layers were successfully computed depending on the number of repeating units. The generation mechanism for the multi-layer was numerically verified by the flow simulation and visualization in the co-extrusion die using OpenFOAM(R). The results suggested that the multi-layer has a divided and folded mechanism similar to the stretching and folding in the chaotic flow.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.35-41
• /
• 2020

We conduct numerical simulations of the interaction of a deformable structure with two-phase compressible flow. The finite volume method (FVM) is used to simulate fluid phenomena including a shock wave, a gas bubble, and the deformation of free surface. The deformation of a floating structure is computed with the finite element method (FEM). The compressible two-phase volume of fluid (VOF) method is used for the generation and development of a cavitation bubble, and the immersed boundary method (IBM) is used to impose the effect of the structure on the fluid domain. The result of the simulation shows the generation of a shock wave, and the expansion of the bubble. Also, the deformation of the structure due to the hydrodynamic loading by the explosion is identified.