• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2005.04a
• /
• pp.100-102
• /
• 2005

양성자 빔을 이용한 치료는 종양부위에 높은 선량을 균일하게 전달하고 정상세포에는 적은 선량을 전달할 수 있어 암치료 효과가 높으나 정확한 치료와 환자의 안전을 위해서는 양성자선량의 급락지점을 정확히 아는 것이 중요하다. 본 연구에서는 양성자와 물질과의 핵반응으로 직각방향으로 방출되는 즉발감마선을 측정하여 양성자선량 급락지점을 측정할 수 있는 검출시스템을 몬테칼로 전산코드로 전산모사하였으며, 70MeV 단일에너지 빔과 최대에너지가 70MeV인 SOBP 빔을 모의피폭체인 물팬텀에 조사하고 검출시스템을 통해 직각방향으로 방출되는 즉발감마선의 분포를 계산하였다. 모의피폭체 안에서의 양성자선량의 분포와 측정된 즉발감마선의 분포를 서로 비교하여 두 분포 사이의 상관관계를 찾고 이 상관관계를 이용하여 양성자선량 급락지점을 결정할 수 있음을 확인할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.952-956
• /
• 2010

저수지에 설치된 물순환장치는 저수지 수문상황과 자연조건의 변화에 따라 유동특성이 상이하므로 연구자가 고려하는 다양한 조건에서 현장 측정하기는 불가능하다. 이런 문제를 대체하는 방안으로 전산유체유동(CFD) 모형을 적용한 모사를 실시함으로서 다양한 조건에 따른 효과를 평가할수 있게 된다. 본 연구에서는 전산유체유동을 통한 대류식 물순환장치의 유동영향범위와 수질변화 등을 평가하고, 다양한 조건에서 모사를 실시하여 최적운영방안을 도출하고 실제운영에 활용토록 하고자 한다. 수체거동을 모사하기 위해 실제 저수지를 형상화한 Domain을 3가지로 구성하였다. 첫번째는 반경 20m, 깊이 40m Domain에 물순환장치를 중앙에 설치한 것이며(D20), 두 번째는 반경 40m, 깊이 40m에 두 개의 물순환장치를 양쪽에 설치하였고(D40), 세 번째는 반경 100m, 깊이 40m로 설정(D100)하였고 양쪽에 두 개의 물순환장치를 설치한 것으로 구성하였다. CFD에 의한 개별 대류식 순환장치의 유동모사결과 D20은 시간의 경과에 따라 수온성층이 하강하는 현상이 나타났으며 이러한 결과로 판단할때 40m 간격으로 대류식 순환장치를 설치하여 운영하면 탈성층이 나타날 수 있을것으로 판단되었다. D40에 대하여 CFD에 의한 유동모사를 실시하였으며 시간의 경과에 따라 수온성층의 변화는 나타나지 않았다. 이러한 결과로 판단할때 40m 간격으로 한줄로 대류식 순환장치를 설치하여 운영하면 성층을 깨는 현상은 나타나지 않을 것으로 평가되었다. 반면 Dye테스트시 심층에서 상승한 수체는 수온성층 표면에서 수평방향으로 계속 퍼져 나가면서 옆장치에서 상승된 수체와 혼합이 활발히 이루어 지는 현상을 나타내었다. 장치간 거리가 100m인 대류식 물순환장치에 의한 유동모사시 수온성층의 변화는 전혀 나타나지 않았으며, Dye테스트시 심층에서 상승한 수체는 수온성층 위에서 수평방향으로 퍼져 나가면서 옆에서 가동되는 장치에서 상승된 수체와 혼합 현상을 나타내기는 하나 D40보다 혼합시간이 더 걸리는 것으로 나타났다.

• Korean Journal of Optics and Photonics
• /
• v.33 no.4
• /
• pp.167-176
• /
• 2022

Adaptive optics (AO) systems compensate for atmospheric disturbance, especially phase distortion, by introducing counter-wavefront deformation calculated from real-time wavefront sensing or prediction. Because AO system implementations are time-consuming and costly, it is highly desirable to estimate the system's performance during the development of the AO system or its parts. Among several techniques, we mostly apply statistical analysis, computational simulation, and optical-bench tests. Statistical analysis estimates performance based on the sum of performance variances due to all design parameters, but ignores any correlation between them. Computational simulation models every part of an adaptive optics system, including atmospheric disturbance and a closed loop between wavefront sensor and deformable mirror, as close as possible to reality, but there are still some differences between simulation models and reality. The optical-bench test implements an almost identical AO system on an optical bench, to confirm the predictions of the previous methods. We are currently developing an AO system for a 1.6-m ground telescope using a deformable mirror that was recently developed in South Korea. This paper reports the results of the statistical analysis and computer simulation for the system's design and confirmation. For the analysis, we apply the Strehl ratio as the performance criterion, and the median seeing conditions at the Bohyun observatory in Korea. The statistical analysis predicts a Strehl ratio of 0.31. The simulation method similarly reports a slightly larger value of 0.32. During the study, the simulation method exhibits run-to-run variation due to the random nature of atmospheric disturbance, which converges when the simulation time is longer than 0.9 seconds, i.e., approximately 240 times the critical time constant of the applied atmospheric disturbance.

• Nuclear Engineering and Technology
• /
• v.29 no.6
• /
• pp.8-16
• /
• 1997

ONED94는 노심추적계산, 부하추종모사, 출력증감발 및 재기동 운전전략, 제논진동모사 및 제어봉 이동전략수립 등을 위한 전산 코드로, Westinghouse 형 노심에 대해서는 적용절차 및 방법이 이미 검증되어 노심관리용으로 사용되고 있으며, CE형 노심에 대해서는 CE형 노심핵설계체계를 이용한 단면적 자료생산에서 적응계산에 이르기까지 ONED94 모델 생산 방법과 절차는 확립된 상태에 있다. 이 보고서에서는 영광3호기 초기노심의 시운전 자료를 토대로 50, 80 및 100% 출력에서의 제논진동 및 출력증감발 모사계산을 수행하여 CE형 노심에 대하여 ONED94코드를 검증하였다.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.75-82
• /
• 1993

A 50 ㎾ phosphoric acid fuel cell(PAFC) system using natural gas was simulated for steady state with the commercial software, ASPEN PLUS. The USER block and the FORTRAN block were prepared to simulate the cell. The changes of hydrogen yield according to the variation of several operating conditions were examined and the operating conditions to maximize hydrogen yield were obtained. The simulation results agree with the real data, which can be used to prepare the basic process data and the optimal conditions for the domestic commercial fuel cell system. H$_2$utilization rate over 50% should be maintained to achieve the efficiency of the conventional electricity generation. Energy consumption can be reduced by utilizing the heat released from the reformer and the cell which are operated at high temperatures.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.866-873
• /
• 2012

IgY (Immunoglobulin Yolk) is a specific antibody in egg yolk, and it protects human body from virus and antigen. There are a lot of egg yolk components such as lipoprotein and protein. To separate IgY, HPLC (High Performance Liquid Chromatography) and precipitation were used in a batch mode and SMB (Simulated Moving Bed) was adopted for continuous purification of yolk proteins. IgY and other proteins in yolk were separated by using three-zone and four-zone SMB chromatography. Before performing SMB experiments, batch chromatography simulation parameters and adsorption isotherms were obtained. The parameters of batch chromatography were used to simulate SMB using Aspen chromatography. To compare three-zone and four-zone SMB chromatography, simulations in $m_2-m_3$ plane on the triangle theory were carried out. In terms of concentration and purity of both IgY and other lipoproteins, 3-zone SMB process is considered as ideal at the vertex of triangle ($m_2$, $m_3$=0.1, 1.1). 4-zone SMB yields the highest IgY purity at the coordinate ($m_2$, $m_3$=0.06, 0.5), which is the pure raffinate region. In 3-zone SMB without recycle, other lipoproteins in extract are largely affected in purity by small shift from the vertex of triangle ($m_2$, $m_3$=0.1, 1.1).

• Membrane Journal
• /
• v.27 no.4
• /
• pp.358-366
• /
• 2017

The most important factor in the performances of polymer electrolyte membranes for fuel cells is how fast hydrogen ions can be transported along the water channel formed inside the electrolyte membrane. Since the morphology of the water channel and the diffusivity of the protons are very important factors for the proton transport behavior, various molecular dynamics simulation studies are being carried out to clarify this. The force-field is an important variable parameterizing the movement and interaction of each atom in molecular dynamics simulation. In this study, proton diffusivities of the 3D models of polymer electrolyte membranes were calculated in order to analyze the effects of various types of force-fields on the molecular simulation. It has been found that the charge value determining the non-bonding interaction plays a very important role in the formation of the water channel morphology, and the COMPASS force-field can calculate the accurate proton diffusion behavior. Accordingly, for molecular dynamics simulation of polymer electrolyte membranes, the proper selection of the force-field is very important due to its great effect on the proton diffusion as well as the final molecular structure.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.7-19
• /
• 2007

[ ${\Box}$ ] Biomimetics is the abstraction of good design from nature. ${\Box}$ Nature works for Maximum achievement at Minimum effort. ${\Box}$ When designing a new product, we can often find the right qualities and properties in a natural product.

• 한국전산유체공학회:학술대회논문집
• /
• 1996.05a
• /
• pp.1-3
• /
• 1996

The numerical simulation techniques developed for the flows of non-Newtonian fluids including the viscoelastic fluids and the short fiber suspensions are introduced. And the causes of the numerical breakdown and the recent efforts to resolve them are presented in particular.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.351-359
• /
• 2009

We have developed a computer simulator fur cone-beam computed tomography (CBCT) based on the commercial Monte Carlo code, MCNP. All the functions to generate input files, run MCNP, convert output files to image data, reconstruct tomographs were realized in graphical user-interface form. The performance of the simulator was demonstrated by comparing with the experimental data. Although some discrepancies were observed due to the ignorance of the detailed physics in the simulation, such as scattered X-rays and noise in image sensors, the overall tendency was well agreed between the measured and simulated data. The developed simulator will be very useful for understanding the operation and the better design of CT systems.