• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.224-229
• /
• 2004

The objective of this work is not only to perform feasibility studies on the CFD (computational fluid dynamics) analysis for the capillary system design but also to provide an enhanced understanding of the autonomous capillary flow. The capillary flow is evaluated by means of the commercial CFD software of FLUENT, which includes the VOF (volume-of-fluid) model for multiphase flow analysis. The effect of wall adhesion at fluid interfaces in contact with rigid boundaries is considered in terms of static contact angle. Feasibility studies are first performed, including mesh-resolution influence on pressure profile, which has a sudden increase at the liquid/gas interface. Then we perform both 2D and 3D simulations and examine the transient nature of the capillary flow. Analytical solutions are also derived for simple cases and compared with numerical results. Through this work, essential information on the capillary system design is brought out. Our efforts and initial success in numerical description of the microfluidic capillary flows enhance the fundamental understanding of the autonomous capillary flow and will eventually pave the road for full-scale, computer-aided design of microfluidic networks.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.263-266
• /
• 2012

The characteristics of mild combustion and pollutant emission were investigated computationally with supplied air stream temperature and dilution rate in jet flame. The air was diluted with main combustion products. As dilution rate increased at fixed air temperature, the temperature distribution of burner inside was uniformed and the maximum mole fraction of CO and NO was decreased. In addition, emission indices for NO, CO, and $CO_2$ were compared with air temperature and dilution rate.

• 설비공학논문집
• /
• 제29권10호
• /
• pp.538-550
• /
• 2017

In a PWR (Pressurized Water Reactor), the appropriate heat removal from the surface of fuel rod bundle is important for ensuring thermal margins and safety. Although many CFD (Computational Fluid Dynamics) software have been used to predict complex flows inside fuel assemblies with mixing vanes, there is no domestic regulatory guideline for the comprehensive evaluation of CFD software. Therefore, from the nuclear regulatory perspective, it is necessary to perform the systematic assessment and prepare the domestic regulatory guideline for checking whether valid CFD software is used for nuclear safety problems. In this study, to provide systematic evaluation and guidance on the applicability of CFD software to the domestic nuclear safety area, the results of the sensitivity analysis for the effect of the discretization scheme accuracy for the convection terms and turbulence models, which are main factors that contribute to the uncertainty in the calculation of the nuclear safety problems, on the prediction performance for the turbulent flow distribution inside the fuel assembly with split-type mixing vanes were explained.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.93-101
• /
• 2015

This paper provides numerical results of the simulation for the flow around the hull and the propeller of KCS model ship advancing in shallow water conditions. A finite volume method is used to solve the unsteady Reynolds averaged Navier-Stokes(RANS) equations, where the wave-making problem is solved by using a volume-of-fluid(VOF) method. The wave formed near the hull surface in shallow water conditions shows a deep trough dominant pattern that causes the loss of buoyancy followed by hull squat. The flow past the hull increases as the depth of water decreases. However, the axial flow velocity around the stern shows a reduction in magnitude by the effect of shallow water accompanied by the hull-propeller interaction. As a results, the thrust and torque coefficient increase about 8.3% and 6.2%, respectively for a depth of h/T=3.0 corresponding to a depth Froude number of $F_h=0.693$. The resistance coefficient increases about 11.6% at this Froude number condition.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1063-1069
• /
• 2011

본 논문은 2 MW급 풍력터빈 3기로 구성된 6 MW 해상풍력발전단지의 풍력터빈 이격거리에 따른 공기역학적 출력 변화를 전산유동해석을 활용하여 연구한 것이다. 육상 뿐만 아니라 해상풍력발전단지에 있어서 레이아웃 설계는 풍력발전단지 초기 투자비, 년간 발전량 및 유지보수비에 영향을 끼치는 핵심 인자이다. 각 풍력터빈 로터에 대해서 모멘텀 소스를 가지는 액츄에이터 디스크가 아닌 완전한 3-D 모델에 대해서 전산유동해석 기법을 적용하여 연구하였으며 이는 기술적으로 큰 의미를 가진다. 본 논문의 연구결과는 향후 해상풍력발전단지 레이아웃 설계에 유용하게 적용될 수 있을 것이다.

• 항공우주시스템공학회지
• /
• 제18권2호
• /
• pp.40-46
• /
• 2024

본 연구는 도심 지역에서 드론 비행 경로의 계획과 안전성 평가를 개선하기 위해 CFD(Computational Fluid Dynamics)를 활용하는 방법을 제시한다. 도심 지역에서의 드론 비행은 빠르게 증가하고 있는데, 아직 경로 계획 및 안전성 평가 방법이 정립되어 있지 않으며 실험적으로 접근하고 있어 위험성이 높은 문제가 있다. 이에 본 연구에서는 CFD를 활용하여 드론과 건물 간 복잡한 3D 공간에서의 유체 역학을 고려한 비행 경로를 계획하고, 각 경로의 안전성을 정량적으로 평가하였다. 이를 위해 김천 혁신도시를 대상 지역으로 설정하여 지형과 건물 데이터 수집 및 비행 예상 경로를 선정하였다. CFD 유동 해석을 통해 비행 시뮬레이션과 안전성 평가를 위한 기본 데이터를 마련하였으며 이를 통해 드론이 제안된 비행 경로로 비행하였을 때 환경 유동에 의한 안전성 평가를 수행하였다.

• 설비공학논문집
• /
• 제27권4호
• /
• pp.220-227
• /
• 2015

Complex thermal hydraulic characteristics exist inside the reactor because the reactor internals consist of fuel assembly, internal structures and so on. In this study, to examine the effect of Reynolds-Averaged Navier-Stokes (RANS)-based two-equation turbulence models in the analysis of flow distribution inside a 1/5 scaled-down APR+, simulation was performed using the commercial computational fluid dynamics software, ANSYS CFX R.13 and the predicted results were compared with the measured data. It was concluded that reactor internal flow pattern was locally different depending on the turbulence models. In addition, the prediction accuracy of k-${\varepsilon}$ model was superior to that of other two-equation turbulence models and this model predicted the relatively uniform distribution of core inlet flow rate.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.261-265
• /
• 2011

An adaptive wavelet transformation method with high order accuracy is proposed to allow efficient and accurate flow computations. While maintaining the original numerical accuracy of a conventional solver, the scheme offers efficient numerical procedure by using only adapted dataset. The main algorithm includes 3rd order wavelet decomposition and thresholding procedure. After the wavelet transformation, 3rd order of spatial and temporal accurate high order interpolation schemes are executed only at the points of the adapted dataset. For the other points, high order of interpolation method is utilized for residual evaluation. This high order interpolation scheme with high order adaptive wavelet transformation was applied to unsteady Euler flow computations. Through these processes, both computational efficiency and numerical accuracy are validated even in case of high order accurate unsteady flow computations.

• 신재생에너지
• /
• 제19권4호
• /
• pp.53-60
• /
• 2023

The Computational Fluid Dynamics (CFD) model is a method of studying the flow phenomenon of fluid using a computer and finding partial differential equations that dominate processes such as heat dispersion through numerical analysis. Through CFD, a lot of information about flow disorders such as speed, pressure, density, and concentration can be obtained, and it is used in various fields from energy and aircraft design to weather prediction and environmental modeling. The simulation used for fluid analysis in this study utilized Gexcon's (FLACS) CODE, such as Norway, through overseas journals, for the accuracy of the analysis results through many experiments. It was analyzed that a technology for treating two or more catalysts with physical properties under low-temperature atmospheric pressure conditions could not be found in the prior art. Therefore, it would be desirable to establish a continuous plan by reinforcing data that can prove the effectiveness of producing efficient synthetic oil (renewable oil) through the application that pyrolysis under low-temperature and atmospheric pressure conditions.

• 한국항공우주학회지
• /
• 제39권8호
• /
• pp.702-710
• /
• 2011

본 연구에서는 외부유동현상 해석에 오픈 소스 기반의 전산유체역학 프로그램인 OpenFOAM의 적용가능성을 검토하였다. 이를 위해 초음속, 천음속, 아음속 유동 영역에서 각 부분에 대표적인 해석 케이스를 선정하고 OepnFOAM에서 제공하는 해석자를 사용하여 해석을 수행했으며 해석 결과를 실험 결과 및 타 전산유체역학코드와 비교하였다. 충격파가 발생하는 초음속과 천음속 영역에서 충격파 예측의 정확도를 확인할 수 있었으며 경계 조건에 따른 결과의 정확도를 비교하였다. 아음속 유동 영역에서는 큰 박리가 일어나는 해석 케이스를 선정하여 복잡한 유동장하에서 OpenFOAM의 해석 정확도를 확인하였다. 위의 연구 결과를 바탕으로 OpenFOAM의 활용가능성과 한계를 확인하였고 이를 바탕으로 향후 OpenFOAM을 기반으로 수행할 연구 내용을 제시하였다.