• 제목/요약/키워드: 전륜

검색결과 70건 처리시간 0.03초

자동차용 능동 전륜 조향 제어 시스템 설계 (Development for Automotive Active Front Steering System)

  • 조영훈;제성규;윤석찬
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.280-282
    • /
    • 2008
  • 본 논문은 자동차용 능동 전륜 조향 제어 시스템을 소개한다. 능동 전륜 조향 장치는 조향의 편의성과 안정성을 위하여 조향비를 가변하거나 유사시 능동적으로 전자 제어 유닛(Electronic Control Unit : ECU)이 액추에이터를 제어해 주는 시스템이다. 최근 전자 샤시 시스템의 개발 추세인 샤시 통합 제어 관점에서 능동 전륜 조향 장치의 역할을 설정하고 성능 만족을 위한 제어기 구조에 관하여 설명한다. 설계된 제어 시스템을 3,300cc급 대형 승용차에 적용하여 그 유용성을 검증하였다.

  • PDF

전륜 제동력 및 전륜 조향각을 이용한 SUV 차량의 통합운동제어시스템 개발 (Integrated Dynamics Control System for SUV with Front Brake Force and Front Steering Angle)

  • 송정훈
    • 한국기계가공학회지
    • /
    • 제21권5호
    • /
    • pp.22-27
    • /
    • 2022
  • An integrated front steering system and front brake system (FSFB) is developed to improve the stability and controllability of an SUV. The FSFB simultaneously controls the additional steering angle and front brake pressure. An active front steering system (AFS) and an active front brake system (AFB) are designed for comparison. The results show that the FSFB enhances the lateral stability and controllability regardless of road and running conditions compared to the AFS and AFB. As a result, the yaw rate of the SUV tracks the reference yaw rate, and the side slip angle decreases. In addition, brake pressure control is more effective than steering angle control in improving the stability and steerability of the SUV on a slippery road. However, this deteriorates comfort on dry or wet asphalt.

ADAMS를 이용한 항공기 전륜착륙장치의 동적거동해석 및 최적설계 (Dynamic Behaviors and Optimal Design of an Aircraft Nose Landing Gear using ADAMS)

  • 김선구;김철;김영만
    • 한국항공우주학회지
    • /
    • 제35권7호
    • /
    • pp.612-618
    • /
    • 2007
  • 본 연구에서는 KT-1 계열 항공기 전륜착륙장치의 동적거동을 분석하고 충격흡수효율을 향상시키기 위한 완충기의 최적설계가 수행되었다. 전륜착륙장치는 ADAMS를 이용하여 2자유도계로 모델링하였으며 운영/환경 조건을 고려한 해석결과는 낙하실험결과와 잘 일치하였다. 또한 최적설계변수를 선정하기 위해 오일밀도, 오리피스 단면적과 같은 완충기 파라미터를 변화시켜 동적거동 및 충격흡수효율에 미치는 영향을 분석하였으며, 해석 결과 완충기 파라미터가 다른 파라미터들보다 큰 영향을 미쳤다. 유용방향탐색법을 사용하여 최적설계를 진행하였고, 최대효율을 나타낼 때 설계변수의 값을 산출하였다. 이러한 방법으로 전륜착륙장치의 최적설계를 통해 충격흡수효율과 동적거동능력을 향상시킬 수 있었다.

전륜 조향용 전기식 작동기 피로수명 평가 (Evaluation of Fatigue Life of Electro-Mechanical Actuator for Front Wheel Steering)

  • 김영철;김현기;김동협;김상우
    • 항공우주시스템공학회지
    • /
    • 제17권4호
    • /
    • pp.126-132
    • /
    • 2023
  • 최근 항공분야에서는 온실가스 배출 저감을 위한 친환경 기술이 강조되면서 전기를 주동력원으로 기계적인 직진, 회전 운동을 제어하는 전기식 작동기의 다양한 연구가 진행되고 있다. 본 연구에서는 단일통로 항공기 전륜조향용 전기식 작동기의 피로수명을 평가하였다. 구조해석을 통해 작동기의 취약부위들을 선정하여 이들에 대한 단위하중 응력표를 구축하였고, 각 하중 프로파일에 대한 대표응력을 계산하였다. 또한 낙수계수법으로 대표응력 그룹의 개별 프로파일을 추출하고, 이를 소재의 S-N 선도에 적용하여 개별 프로파일에 대한 손상을 계산하였다. 최종적으로 손상누적법칙으로 취약 부위들에서의 총 손상을 산출하였고, 단일통로 항공기 전륜조향용 전기식 작동기의 취약 부위들에 대한 피로수명을 평가하였다.

KRRI 전륜 조향 차량의 횡 방향 선형 동역학 모델 (A Linear Model of Lateral Dynamics of the KRRI All Wheel Steered Vehicle)

  • 김영철;윤경한;민경득;변윤섭;목재균
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.230-231
    • /
    • 2008
  • 본 논문은 KRRI 전륜 조향 차량의 횡 방향 동역학 모델링에 대한 내용을 기술한다. 이 차량은 굴절버스 형태를 갖고 모든 차륜의 조항이 가능하며 트레일러와 트랙터의 후륜이 독립적으로 구동 가능한 시스템을 갖고 있다. 이 시스템의 모델링은 비선형 동역학 방정식을 유도하고 선형화 한 뒤 횡 방향 동역학 모델만을 분리해서 최종적으로 횡 방향 선형 동역학 모델을 유도하는 과정을 거친다. 마지막으로 시뮬레이션을 통해 선형 모델을 검증한다.

  • PDF

능동전륜조향장치 및 능동후륜제동장치의 통합제어기 개발 (Development of an Integrated Control System between Active Front Wheel System and Active Rear Brake System)

  • 송정훈
    • 한국자동차공학회논문집
    • /
    • 제20권6호
    • /
    • pp.17-23
    • /
    • 2012
  • An integrated dynamic control (IDCF) with an active front steering system and an active rear braking system is proposed and developed in this study. A fuzzy logic controller is applied to calculate the desired additional steering angle and desired slip of the rear inner wheel. To validate IDCF system, an eight degree of freedom, nonlinear vehicle model and a sliding mode wheel slip controller are also designed. Various road conditions are used to test the performance. The results show that the yaw rate of IDCF vehicle followed the reference yaw rate and reduced the body slip angle, compared with uncontrolled vehicle. Thus, the IDCF vehicle had enhanced lateral stability and controllability.

회전익 항공기 전륜착륙장치 단속거동 현상 개선연구 (An Improvement Study on Stick-Slip Behavior of Nose Landing Gear for Rotary Wing Aircraft)

  • 최재형;장민욱;이윤우;윤종진
    • 한국항공운항학회지
    • /
    • 제25권3호
    • /
    • pp.61-67
    • /
    • 2017
  • The Nose Landing Gear(NLG) of Rotary Wing Aircraft is an essential equipment in Landing System for pilot to perform a flight mission. It supports the fuselage at ground and absorbs the impact from the ground when landing, thereby, these functions sustain operational capability for pilot and crew. However, the A aircraft caused stick-slip behavior when it was stationed on the ground. Therefore, this paper summarizes pilot comment in operation which are classified by cause of occurrence and the troubleshooting process about each comment. It also describes design improvements which was derived from troubleshooting and suggests verification results of flight test.

가상시험기법을 이용한 승용차 전륜 알루미늄 서브프레임 내구설계 (Durability Design of a Passenger Car Front Aluminum Sub-frame using Virtual Testing Method)

  • 남진숙;신행우;최규재
    • 한국생산제조학회지
    • /
    • 제21권3호
    • /
    • pp.368-375
    • /
    • 2012
  • Durability performance evaluation of automotive components is very important and time consuming task. In this paper, to reduce vehicle component development time and cost virtual testing simulation technology is used to evaluate durability performance of a passenger car front aluminum sub-frame. Multibody dynamics based vehicle model and virtual test simulation model of a half car road simulator are validated by comparisons between rig test results and simulation results. Durability life prediction of the sub-frame is carried out using the model with road load data of proving ground which can evaluate accelerated durability life. We found that the durability performance of the sub-frame is sufficient and it can be predicted within short time compared to rig test time.

능동전륜조향장치를 채택한 사륜조향차량의 횡방향 안정성 강화에 대한 연구 (A Study on Lateral Stability Enhancement of 4WS Vehicle with Active Front Wheel Steer System)

  • 송정훈
    • 한국자동차공학회논문집
    • /
    • 제20권2호
    • /
    • pp.15-20
    • /
    • 2012
  • This study is to propose and develop an integrated dynamics control system to improve and enhance the lateral stability and handling performance. To achieve this target, we integrate an AFS and a 4WS systems with a fuzzy logic controller. The IDCS determines active additional steering angle of front wheel and controls the steering angle of rear wheel. The results show that the IDCS improves the lateral stability and controllability on dry asphalt and snow paved road when double lane change and step steering inputs are applied. Yaw rate of the IDCS vehicle tracks reference yaw rate very well and body slip angle is reduced about by 50%. Response time of the IDCS vehicle is also decreased.