• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.139-140
• /
• 2015

본 논문에서는 73kW IPMSM으로 구동되는 직렬 하이브리드 전기자동차 구동시스템에서 직류 전압의 운영 수준에 따른 전력변환시스템의 효율을 분석하였다. 여러 직류 전압 수준에 대한 배터리, 커패시터 및 3상 인버터의 손실을 PSIM을 이용한 시뮬레이션을 통해 분석하여 효율을 알아보았다. 직류 동작 전압을 증가시키면 배터리와 커패시터에서의 손실은 감소하지만, 인버터의 손실은 도통 손실과 스위칭 손실의 변동정도에 따라 달라진다. 분석 결과로 $300V_{dc}$에서 $600V_{dc}$로 직류 전압 운영 수준을 증가시키는 경우에 전력변환시스템의 효율은 증가하는 것을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.31-33
• /
• 2020

본 논문은 고효율 11kW급 양방향 탑재형 충전기에 대한 연구결과를 발표한다. 토폴로지로는 3상 2-레벨 인버터와 CLLLC 공진형 컨버터를 적용하였으며, 모든 전력반도체 소자는 SiC-MOSFET를 적용하였다. CLLLC 공진형 컨버터의 고효율 달성을 위해, 배터리 전압에 따라 DC 링크 전압 가변 알고리즘을 적용하였으며 양방향 동작시 정류단이 동기 정류기로 동작하도록 설계하였다. 인버터 스위칭 주파수 20kHz, CLLLC 공진형 컨버터 스위칭 주파수 80~300kHz, 배터리 전압 213~413V, 계통 전압 380V/60Hz 사양으로 프로토타입을 설계/제작하였으며 순방향 전력전달 최대 효율 95.8%이상, 역방향 전력전달시 최대효율 95.1%이상의 결과를 달성하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.103-109
• /
• 2012

In this paper, We suggest electricity power management system which makes a good efficient and minimize wasteness of electricity power. We made electricity power management system based USN(Ubiquitous Sensor Network) for industries, factories, public offices and so on, with optimized system. Simply, we can measure and control electricity power as we plug it outlets. This system can monitor and control electricity power, organizing network of PLC(Power Line Communication) and TCP/IP with the sensor for electricity power. Through the acquisition data, this proposed system can manage and save the electricity power efficiently and also we can connect this system to server, anytime, anywhere with Android phone.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.540-547
• /
• 2004

In this paper, a current - mode class D(CMCD) power amplifier over 70 % power added efficiency at 900 ㎒ is designed and implemented. Based on push-pull class B structure, main power loss due to charge and discharge of output capacitance in switching mode power amplifier is minimized by applying a parallel harmonic control circuit. Experimental CMCD amplifier with 73 % power added efficiency at 3.2 W and 72 % power added efficiency at 5 W are achieved respectively. In addition a characteristic of switching mode power amplifier whose output power is proportional to magnitude of U power is verified.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.3
• /
• pp.685-692
• /
• 2019

Smart grid enables efficient power management by allowing real-time awareness of electricity flows through two-way communication. Despite its various advantages, threats to user privacy caused by frequent meter reading hinder prosperous deployment of smart grid. In this paper, we propose a privacy-preserving aggregation method exploiting fully homomorphic encryption (FHE). Specifically, it achieves privacy-preserving fine-grained aggregation of electricity usage for smart grid customers in multiple electrical source environments, while further enhancing efficiency through SIMD-style operations simultaneously. Analysis of our scheme demonstrates the suitability in next-generation smart grid environment where the customers select and use a variety of power sources and systematic metering and control are enabled.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.951-959
• /
• 2011

The low power consumption modulation is required for short range communication. In this paper, we analyze performance of low power consumption modulation scheme such as PSPM, PSSK and QAPM using OFDM transmission in AWGN channel. A PSPM, PSSK and QAPM modulation scheme are decrease in bandwidth efficiency but improved power efficiency than existing PSK and QAM. These modulation schemes can achieve power efficiency because every symbol of modulations has a zero-envelope period like PPM techniques. The OFDM system is high bandwidth efficiency than single carrier system. In this paper, we are propose the frequency domain mapping method for OFDM transmission using low power consumption modulation method. Also, we compare low power OFDM communication system regard to BER performance, throughput and PAPR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.752-759
• /
• 2010

The low power consumption is the most important design factor for the In-Body communication system of WBAN. The conventional PSSK (Phase-Silence-Shift-keying) modulation technique can be regarded as an extension from PSK modulation. And this PSSK has better power efficiency than PSK modulation, and higher spectral efficiency than FSK modulation. PSSK modulation is to transmit two orthogonal symbols. The transmission power can be lowered because the symbol rate in signal period becomes half. BER performance is improved because transmission power is lower and the modulation symbol distance is widened. In addition, PSSK preserve the low-power and increase the data rate than FSK. In this paper, we analyzed existing PSSK and like to propose a new PSPM (Phase-Shift-Position-Modulation) modulation scheme. This PSPM is evaluated in terms of considered bandwidth efficiency and BER performance, compared with the PSSK. This PSPM modulation method transmits the information data by both PSK symbol data and symbol position data, so that we can significantly improve the power efficiency. New proposed PSPM method could be very useful for the In-body communication that requires the most power efficient system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.246-246
• /
• 2012

최근의 디스플레이 시장에서는 고효율 저전력, 자발광 소자인 OLED가 차세대 디스플레이 시장의 블루칩으로써 연구되고 개선되어 왔다. 고효율, 고휘도 구현이 가능한 OLED 소자는 초기 발광 시 수명감소, 저전류 구동 효율 개선 및 소자의 유기 재료 개선의 문제점에 직면해 있기 때문에 많은 가능성을 아직 현실화 하지 못하고 있다. 본 연구에서는 전기적 스트레스를 가한 OLED 소자의 전기적, 광학적 성질을 측정함으로써 열화에 따른 소자의 특성 변화를 확인하여 문제점을 개선하는데 기여하고자 한다. $2{\times}2$ inch Glass에 $2{\times}2$ mm 크기의 발광면적을 갖는 Red OLED 소자를 제작한 후 Source Measure Unit을 이용, 8 V의 과전압을 72시간 동안 인가하여 소자의 열화현상을 가속시켰다. 이후 I-V-L 장비를 이용하여 전기적 특성 및 휘도 특성을 측정하였다. 측정된 결과는 휘도가 8 V에서 10,620 cd/$m^2$ ＞ 9,849 cd/$m^2$ (약 7.2% 감소)로 변화한 것을 확인 하였으며, 휘도 효율과 전력 효율을 측정해본 결과 8 V 에서의 소비전력 효율 역시 16%에서 ＞ 15%로(약 1%감소) 변화하였으나 안정적으로 발광이 유지되는 3 V~6 V 구간에서는 효율이 약 13%가 감소하였다. 또한 휘도 효율은 8 V 기준으로 1% , 3 V~6 V 구간에서는 약 8% 감소하였다. 본 연구 결과를 통하여 OLED 소자의 열화 현상은 소자의 휘도 감소뿐만 아니라 소비전력증가, 열화현상의 촉진으로 이어지는 것으로 확인 되었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.813-822
• /
• 2009

We have investigated operation of a 1:2:2 asymmetric 3-stage Doherty PA(Power Amplifier) and implemented using the Freescale's 4 W, 10 W PEP LDMOSFETS at 1 GHz. By employing the three peak efficiency characteristics, compared to the two peak N-way Doherty PA, the asymmetric 3-stage Doherty can overcome the serious efficiency degradation along the backed-off output power region and maximize the average efficiency for the modulation signal. To maximize the efficiency characteristic, the inverse class F PA has been designed as carrier and peaking amplifiers. Furthermore, to extract the proper load modulation operation, the adaptive gate bias control signal has been applied to the two peaking PAs based on the envelope tracking technique. For the 802.16e Mobile WiMAX(World Interoperability for Microwave Access) signal with 8.5 dB PAPR(Peak to Average Power Ratio), the proposed Doherty PA has shown 55.46 % of high efficiency at an average output power of 36.85 dBm while maintaining the -37.23 dB of excellent RCE(Relative Constellation Error) characteristic. This is the first time demonstration of applying the saturated PA and adaptive gate bias control technique to the asymmetric 3-stage Doherty PA for the highly efficient transmitter of the base-station application.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.4
• /
• pp.13-18
• /
• 2009

This paper suggests that efficiency improvement of power amplifier to enhance harmonic suppression using a DGS line structure. A efficiency related harmonic component is an important factor to design of power amplifier. Therefor harmonic component suppress consisting coupled line using DGS after power amplifier. A DGS line with periodic slits and stubs is first designed and joined after power ampifier. Experimental measurements for efficiency of power amplifier in the WCDMA are shown to improve 6% of PAE.