• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.117-124
• /
• 2015

In this paper, a new kind of wideband, low-loss composite right/left-handed (CRLH) transmission line (TL) and a Wilkinson power divider are presented. The TL is composed of a parallel meander inductor and a series cutting capacitor based on coplanar waveguide (CPW) structure. The power divider is designed by substituting the CRLH-TL into the conventional transmission line. The experiment results show that the TL has a good agreement with the desired results, exhibiting the return losses under 12 dB from 8.4 GHz to 34.4 GHz. The operating frequencies of the power divider are 12.05 GHz to 13.15 GHz and 16.50 GHz to 19.30 GHz, respectively. The 20 dB bandwidths are 8.9 % and 17.9 %, respectively. Typical experimental measurements are conducted and compared with the simulated results.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.909-915
• /
• 2010

In this paper, the unequal power divider based on CRLH (Composite Right/Left-Handed) transmission line with dual-band characteristic is proposed. They consist of dual-band branch line hybrid coupler, the connection between input and isolation port of hybrid coupler and ${\lambda}/4$ impedance transformer. When the transmission line between input and isolation port of hybrid coupler is asymmetrical connected, the divider is obtained the output results of the equal phase and unequal power dividing ratio. The simulation results of the divider represent the power ratio of 0 dB ~ 20 dB. To validate a function of divider, the hybrid coupler and transformer with 880 MHz and 1850 MHz is implemented. As a result, the proposed unequal divider obtains the power ratio of 3.2 dB ~ 8.8 dB at 880 MHz and 2.5 dB ~ 14.0 dB at 1850 MHz.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.202-207
• /
• 2013

In this paper, a high dividing ratio unequal power divider using parallel connection transmission line is presented. Because a very low impedance transmission line can't implement a microstrip technology, this can fabricate a parallel connection transmission line with high impedance. When we design a high dividing ratio divider, we need the very low impedance line. The parallel connection transmission line could be implemented to obtain a low impedance line characteristic. To validity this approach, we are implemented a 10:1 unequal divider at center frequency 1 GHz. The performances of power divider agree with simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.246-252
• /
• 2005

A RF microstrip balun having low transmission loss for the balanced receiving dipole antenna is designed and fabricated using a three-section Wilkinson divider and two 3-dB quadrature couplers. It considers two types of the three-section Wilkinson dividers, the Cohn's optimum three-section structure and the miniaturized three-section structure, for wideband power splitting. Also, two 3-dB quadrature couplers for 180 degrees of phase difference adopt a twist-wire coaxial cable. The fabricated first balun having the Cohn's optimum three-section Wilkinson divider has 0.5 dB of transmission loss, $\pm$0.2 dB of amplitude imbalance, and 180$\pm$2.3 degrees of phase imbalance over 400 to 1000 MHz by measurement. The second one using the miniaturized three-section Wilkinson divider shows 1.0 dB of transmission loss, $\pm$0.7 dB of amplitude imbalance, and 180$\pm$8.8 degrees of phase imbalance over the same frequency band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.69-76
• /
• 2010

From the present paper we researched about the design of 4-Way Wilkinson divider with waveguide to stripline transition which used to split the LO signal with equi-amplitude and equi-phase in the X-Band Monopulse radar RF front-end. The monopulse radar front end operating in the X-Band is composed of 3 waveguide reception mixers which down convert sum, azimuth and elevation signal to IF and one SSB waveguide mixers which generate X-Band test signal. It is required the 4-way divider with low loss, equi amplitude and equiphase splitting the LO signal to provide the LO signal to each mixer consisting RF frontend. In this paper we designed and fabricated the 4-Way Wilkinson divider with waveguide transition to divide the LO signal into equi-amplitude and equi-phase. The fabricated Wilkinson divider have the insertion loss 6.8dB, VSWR 1.06~1.28, and phase balance maximum 4.5degree for each output ports.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.506-511
• /
• 2002

In this paper, waveguide-based power combiner using conventional slotline-to-microstrip transition was proposed at Ka-band. The proposed 2-way and 4-way power combiner consist of waveguide-to-slotline transition, two or four slotline-to-microstrip transitions, and impedance matching networks. Their structures were simulated and optimized by 3-D FEM simulation. The 2-way power combiner showed a very low back-to-back insertion loss of 1.0 dB and return loss better than 15 dB from 25.7 GHz to 29.8 GHz except the resonant frequency. The 2-way power combining approach was extended to 4-way power combining using slotline tee junction. The 4-way power combiner showed the similar performance to that of 2-way power combiner with 2 GHz smaller bandwidth.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.189-194
• /
• 2001

본 논문에서는 10 GHz 이하에서 하나의 입력과 다수의 출력을 가지는 [10]에서 제시한 Taper형의 평면구조의 전력 분배/결합기의 구조를 수정하여 출력단의 폭이 다시 좁아지는 구조를 제안한다. 입력 정합 그리고 각 출력 단에서 출력 신호의 균형과 위상의 선형성을 위해 회로의 중앙에 하나의 원을 에칭 제거한 구조를 채택하여 2 GHz에서 개발한 전력 분배/결합구조를 [10]의 구조와 반사특성과 위상특성을 비교 분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1747-1753
• /
• 2001

This paper describe the design and fabrication of a SMD type Wilkinson power divider for PCS basestation. It has been designed for commercial power amplifier system by HP-ADS and fabricated with the size 0.56 $\times$ 0.35 inches. As a result, the power divider was well-operated in the frequency ranges of 1.75 ∼ 1.98GHz for the application of PCS system. The power divider reveals insertion loss 0.2dB, isolation -19.8dB, amplitude balance 0.02dB, phase balance 0.5o, input and output impedance matching -20.6dB respectively.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.299-304
• /
• 2020

This paper proposes the design of circular sector shaped power divider-combiner with a planar structure. This structure can be constructed in series, and due to the circular sector shape, it is possible to simplify circuit configuration and improve the amplitude and phase balanced characteristics of the output. It has a simple input matching circuit and an RC parallel circuit was inserted between the output ports to improve the reflection coefficient and isolation of the output. Since the designed divider-combiner are structurally designed in a symmetrical shape of a sector, even if the output ports are composed of two or four output ports, they have excellent characteristics with an amplitude balance of ± 0.1 dB and a phase balance of ± 1o between outputs. To prove these characteristics, it was confirmed that the characteristics of the planar power divider-combiner fabricated at an operating frequency of 2 GHz are in good agreement with the simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.89-101
• /
• 2006

This paper addresses Electrical Power Subsystem(EPS) design and verification of HAUSAT-2 small satellite through energy balance analysis(EBA) depending on individual operation modes. GaAs solar cells are used for satellite power generation and digital peak power tracking is implemented for EPS architecture. One battery pack is consisted of 4 Li-Ion cells. Battery charge is accomplished by peak power tracker and battery charge regulator. Power conditioning assembly uses three DC-DC converters, and power distribution assembly which consists of commercial IC and MOSFET switch distributes power to subsystems and payloads. The altitude of 650km and sun-synchronous LEO with various local time ascending node(LTAN) are considered in EBA.