• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.471-473
• /
• 2012

본 논문은 DMS (defected microstrip structure) 선로를 이용한 전력분배기 설계에 대하여 기술하고 있다. DMS 선로는 마이크로스트립 선로의 패턴에 변형을 가하여 설계되는데, 이 때 부가적으로 발생하는 인덕턴스와 커패시턴스 효과에 의하여 선로의 특성 임피던스가 변하고, 또한 종래 주기구조에서의 특징들을 보인다. 이를 이용하면 초고주파 전송선로 구조의 무선회로들을 소형화할 수 있는데, 그 한 예로 본 논문에서는 윌킨슨 전력분배기를 소형화하는 설계에 대하여 기술한다. DMS 구조를 삽입하여 소형화된 전력분배기를 설계한 결과, 소형화된 분배기는 표준형 회로에 비하여 약 82%의 크기를 가지면서도 우수한 성능을 갖는다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.661-668
• /
• 2012

A coaxial-cable impedance transformer that can be used in high power and wideband frequency range is an arbitrary impedance transformation ratio by an additional coaxial cable. The coaxial-cable impedance transformer to be 50-${\Omega}$ to 25-${\Omega}$ impedance transformation ratio is easily operated an wideband power divider by connecting two 50-${\Omega}$ lines at 25-${\Omega}$ impedance point. This wideband power divider has a poor output matching characteristic and a poor isolation characteristic between two output ports. In this paper, it proposes a coaxial-cable power divider to be a good output matching and isolation characteristics as it uses the singly terminated filter design theory. The odd-mode operation characteristic of the suggested power divider to use singly terminated low pass filter coefficient due to matching order and ripple value is examined by ADS program. And, it fabricates and measures the operation characteristic of 2-way power divider with 2nd-order and 4th-order matching circuit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.962-966
• /
• 2009

In this paper, N-way resistance power divider is described for wideband frequency characteristic. For this, we derived in design equation of a N-way resistance power divider using 3-way resistance power divider. We designed 8-way resistance power divider that can divide same power by 7 output and measurement result of fabricated resistance power divider is observed to prove the validity of derived design equation. Fabricated resistance power divider shown equal power division ratio and reflection loss displayed excellent characteristic by about -25dB in broadband from DC to 3GHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.47-52
• /
• 2011

Nano-scale power splitter based on Si plasmonic waveguides are designed by utilizing the multimode interference (MMI) coupler. Effective dielectric method and longitudinal modal transmission-line theory are used for simulating the light propagation and optimizing the structural parameters at 3-D guiding geometry. The designed $1{\times}2$ 50:50 MMI power splitter has a nano-scale size of only $800nm{\times}850nm$. In order to achieve a variable power splitting ratio, a $2{\times}2$ MMI coupler is designed and the corresponding power splitting ratio can be tuned in the range of 78.5%:15.5%~5.5%:86.6%. Also, it is shown that it has a large bandwidth of $1.5{\mu}m{\sim}1.7{\mu}m$. In this range, the transmission is over 0.8.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.42-46
• /
• 2014

A modified network to suppress the nth harmonics in a Wilkinson power divider is presented. The solution has been found by adding transmission lines, whose electrical lengths are determined by using the suppression terms, between two transformers of the traditional design. Experimental results show the second and third harmonics levels achieved are -45.3 and -46.4 dB, respectively, while the performance of the power divider at the fundamental frequency is maintained.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.46-50
• /
• 2013

A modified design that can reject the nth harmonic components in the Wilkinson power divider is presented. After adding transmission lines of electrical lengths determined by suppression terms between two transformers of the traditional design, a solution of the modified Wilkinson divider can be found. Experimental results show the second and third harmonic suppression to be -45.3 dB and -46.4 dB, respectively, while maintaining the conventional performance at the fundamental frequency.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.343-348
• /
• 2014

This paper suggested a theoretical approach and an implementation for the design of an unequal Wilkinson power divider with a high dividing ratio operating at two-frequencies. The T-section transmission lines and the two-section of Monzon's theory are proposed to operate a dual-band application. To achieve the high dividing ratio divider, the high impedance line using a T-shaped structure and low impedance lines with periodic shunt open stubs are implemented. For the validation of this divider, a dual-band power divider with a high dividing ratio of 5 is simulated and measured at 1 GHz and 2 GHz. The measured performances of the divider are in good agreements with simulation results.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.578-584
• /
• 2011

This paper presents the design and measured performances of an unequal dual-band power divider using lumped elements. After the divider is designed using the conventional single band Wilkinson topology with lumped elements, we obtained the dual band characteristics with filter conversion method. This design method has the features of compact size and easy fabrication, because the high impedance transmission line realizes the lumped elements of equivalent circuit. As an example, an 2:1 divider has been designed and measured at 880 MHz and 1650 MHz in order to show the validity of the proposed unequal divider. The measured performances of the unequal power divider agree with the simulation results.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.63-66
• /
• 2007

본 논문에서는 주변에서 쉽게 구할 수 있는 재료를 이용해 만든 인덕터와 커패시터를 사용해 윌킨슨 전력 분배기를 설계/제작하였다. 일반적으로 전력 분배기는 $\lambda/4$ 전송선로를 이용하기 때문에 인덕터와 커패시터를 사용할 수 있도록 전송선로를 집중소자로 변환해야 한다. 전송선로를 집중소자로 변환하기 위해 한 개의 직렬 인덕터와 두 개의 병렬 커패시터로 등가화하였다. 인덕터는 솔레노이드 형태로 선의 굵기와 솔레노이드의 반지름, 감은수에 변화를 주며 제작하였고, 커패시터는 평행판 커패시터 형태로 넓이에 변화를 주어 제작하였다. 구현된 전력 분배기는 설계 주파수에서 각각의 출력 포트에 -3.30dB, -3.31dB로 전력이 균등분배 되는 특성을 보였고, 반사손실은 -42.36dB, 출력 포트 간의 격리도는 -31.54dB로 설계 조건을 만족하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1409-1415
• /
• 2021

The Gysel divider has the advantage of easily setting the resistor in the circuit. If the line impedance in the Gysel divider is set differently, the input signal can be distributed to the two output ports at various distribution ratios. This paper proposes the Gysel divider that can change the power distribution to 1:3 or 3:1 by changing the line impedance. The impedance change of the line can be implemented by placing a floating copper plate on the bottom of the microstrip-line. When the floating copper plate and the ground plane are connected, the line operates as the microstrip-line, and when the floating copper plate and the ground plane are disconnected, the line operates as the coplanar-line. The proposed Gysel divider was fabricated at the center frequency of 1.5GHz. The fabricated 3:1 Gysel divider has a stable value S₁₁ of below -17dB, S₂₁/S₃₁ of 4.8±0.2dB, S₂₁(to high output port) of -1.39±0.12dB and S₃₁(to low output port) of -6.15±0.08dB over 1.3~1.7GHz.