• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.85-92
• /
• 2013

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. The main contributors to rolling noise are the sleepers, rail, and wheels. In order to analyze and predict rolling noise, it is necessary to understand the vibrating behaviors of railway tracks, as well as of the wheels. In the present paper, theoretical modeling methods for railway track are reviewed in terms of rolling noise; these methods are applied for the three representative types of domestic railway tracks operated: the conventional ballasted track, KTX ballasted track and KTX concrete track. The characteristics of waves propagating along rails are investigated and compared among the types of tracks. The tracks are modeled as discretely supported Timoshenko beams and are compared in terms of the averaged squared amplitude of velocity, which is directly related to the sound radiation from the rails.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.452-459
• /
• 2020

The electric actuator receives the user's command input signal (open/closed/stop), checks the status of various sensors (valve position, rotational force, motor status, etc.)in the actuator, and controls the motor forward/reverse to open and close the valve. It is a device that outputs the current state of an actuator (valve) and is used in various fields such as dams, power plants, water and sewage facilities, and oil pipeline facilities. If an electric actuator is installed in a power plant and a problem occurs during operation, it can cause a large economic loss, so system reliability is vert important. In this study, in order to increase the safety of the electric actuator, the development of an electric actuator control device capable of setting the ON/OFF time in hardware was conducted to solve the reliability problem that may occur in software. In addition, the electric actuator control device development environment was developed using Xilinx's Spartan7 FPGA and Altium tool.

• Restorative Dentistry and Endodontics
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2011

Introduction: The aim of this paper is to discuss the mechanical and geometric features of Nickel-titanium (NiTi) rotary files and its clinical effects. NiTi rotary files have been introduced to the markets with their own geometries and claims that they have better ability for the root canal shaping than their competitors. The contents of this paper include the (possible) interrelationship between the geometries of NiTi file (eg. tip, taper, helical angle, etc) and clinical performance of the files as follows; - Fracture modes of NiTi rotary files - Non-cutting guiding tip and glide path - Taper and clinical effects - Cross-sectional area and clinical effects - Heat treatments and surface characteristics - Screw-in effect and preservation of root dentin integrity - Designs for reducing screw-in effect Conclusions: Based on the reviewed contents, clinicians may have an advice to use various brands of NiTi rotary instruments regarding their advantages which would fit for clinical situation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.357-357
• /
• 2023

2017년 7월 16일 집중호우로 인해 무심천 상류에 위치한 충청북도 청주시 상당구 남일면 고은리 655번지의 농경지 침수 피해가 발생하였다. 대상지역의 우안 제방에는 기존에 수동식 수문이 설치되어 있었으나 내구연한이 지나고 부식되어 수년전에 망실되었으며, 2017년 7월 홍수 이후 유사한 규모의 홍수가 발생 할 경우 대상지역은 홍수피해를 겪을 수밖에 없는 상황에 처해 있다. 이에 따라 홍수방어 시설인 전동식 수문을 설치하여 설치 전·후의 침수 피해를 분석하였다. 본 연구에서는 청주 수위관측소의 2017년 7월 15~16일 수위자료를 수집하여 수위-유량관계곡선식(Rating Curve)을 적용한 시간당 유량자료를 산정하였으며, 수문설치 지점인 고은리 655번지를 시점으로 하류 약 15.871km에 위치한 흥덕교까지 HEC-RAS 모형을 이용하여 홍수분석을 수행하였다. 무심천 우안 제방 내 수문이 설치되기 전과 후에 따른 대상지역의 제내지 침수구역 범위를 산정하여 비교 분석하였다. 측점은 96개의 횡단면으로 구성하였으며, 부정류 해석을 위한 경계조건으로 상류단 유입량, 측방 유입량 및 하류단 수위를 적용하였다. 홍수분석 결과 단면별 최대수위는 EL.41.92m~EL.66.29m의 범위를 나타내고 있으며, 적용 홍수에 따른 최대 유속은 3.17 m/s로나타났다. 수문설치 지점의 하천 횡단에서 발생하는 최고 수위는 EL.66.29m로 산정되었으며, EL.66.29m를 기준으로 전동식 수문이 설치되기 전과 후의 침수범위를 분석하였다. 설치 전 홍수분석 결과 제내지 침수구역의 면적은 141,309.3m²로 분석되었다. 전동식 수문을 설치함에 따라 대상지역의 제내지 침수 피해를 겪지 않은 것으로 분석되었다. 향후 전동식 수문과 IoT기술을 접목하여 지자체의 재난관리 시스템과 연동할 수 있다면, 유사한 침수피해를 최소화 하는데 기여할 것으로 판단된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.1-16
• /
• 2022

Recently, e-scooters have been attracting attention as eco-friendly modes of transportation in cities due to an increasing interest in the environment. Accordingly, various studies on usage behavior are being conducted, but studies that reflect individual travel attitudes are insufficient. Therefore, this study surveyed commuters in Seoul and analyzed respondents' traveling attitudes through factor analysis. It also built a binary logistic regression model for the intention to use shared e-scooters to determine how individual travel behaviors are affected. In particular, the model results showed that age, the main mode of transportation (car), walking time to the bus stop, and four travel attitude variables (disutility of travel, preference to self-drive, internet/smartphone friendliness, and willingness to pay extra money for services) significantly affected the intention to use shared e-scooters. This study is expected to be used as basic data, with aspect to travel behavior, for the efficient operation and use of shared e-scooters in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.3
• /
• pp.29-47
• /
• 2024

Many domestic and foreign studies derive factors that significantly affect the use of shared E-scooters based on performance data, but few studies have been conducted with comparative analysis models using predictive power, applying them to other regions. Therefore, by clearly establishing detailed influencing factors and scope in Gwangjin-gu and Gangnam-gu by using domestic shared E-scooter performance data, this study enhances predictive power, and the Geographically Weighted Regression model is derived through spatial autocorrelation verification. Based on the results, the direction of a construction model created from regional differences was presented, and major implications from the user's perspective are derived based on the difference between actual use and the model's prediction.

• 재활복지
• /
• v.20 no.1
• /
• pp.211-233
• /
• 2016

The purpose of this study is to figure out problems and to suggest improvement scheme by examining 31 of the disabled who used power wheelchair developed for safe moving and standing support. The results are as follows. First, standing power wheelchair that enables the disabled to sit and stand up was developed. It can also be used as means of transportation for moving in narrow space and in a short distance. In the usability test of this prototype, two groups were respectively examined in 60 evaluation items. One group consisted of 16 people with disabilities using manual wheelchairs. And the other one consisted of 15 people with disabilities using automatic wheelchairs. The entire average figure of two groups was shown to be 2.72 and standard deviation was 0.820. Specifically, the average figure of the group in manual wheelchair was 2.85 and the one of the other group in automatic wheelchair was 2.57. And both group replied that the move to stand up and sit on both types of wheelchair was the most inconvenient thing. It shows why ergonomic design for persons with under extremity disabilities to stand up and sit is needed. Second, with further study based on the results of usability test of the disabled, it will make contribution to increase the quality of people with disabilities by helping them move and do daily lives on their own.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.857-866
• /
• 2020

'Movement' is an expanded concept of 'place' where people act, interact with one another and achieve a specific purpose at every moment. Wheelchairs, as a mobility aid, have a profound impact on improving the quality of physical and psychological well-being for the mobility disadvantaged groups who have mobility difficulties. Such mobility aids were developed mainly for outdoor activities, but in recent years, mobility aids for indoor spaces, the main living environment, are also being developed. Because indoor mobility aids generally move short distances repeatedly, this study examined the characteristics of lithium-ion batteries in short-distance driving of battery-powered wheelchairs and compared them with the characteristics of lithium-ion batteries in continuous driving. The result showed that the driving time for short-distance driving was 2.8% shorter than that of continuous driving. The current supplied to the motor was 15.4% higher for short-distance driving than that of continuous driving.

• Smart Media Journal
• /
• v.11 no.5
• /
• pp.75-81
• /
• 2022

In order to respond to carbon neutrality and climate change in agriculture, agricultural machinery, which has been developed centered on internal combustion engines, needs to be converted to an electric-based technology that does not emit greenhouse gases. In this study, simulations for electric UTV suspension design were performed to reduce vibration and shock of electric UTV for agricultural use and to improve driving stability and control performance of the vehicle. The simulation was performed by dividing the tolerance load of the vehicle body and the loaded load state. The range of motion of the suspension spring of UTV is within 30% of the range of motion under condition B under tolerance, the displacement of the UTV suspension with full load is reduced from 264mm to 121mm, and the damping speed is 260mm/s to 300mm/s that it can be seen that the range of motion is within 60%. Suspension design of electric UTV for multi-purpose agricultural work is a very important factor for maintaining agricultural work ability in towing work such as tillage as well as driving and terrain adaptation. The results of this study can be usefully used to determine the spring parameters with the appropriate damping range so that the electric UTV can be used for various agricultural tasks.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.124-140
• /
• 2023

The rapid growth in shared E-scooters worldwide has led to many studies on the topic. The results of these studies are still in the early stages, and the main factors affecting trips are being identified. In particular, the development of trip-generation models is very important for transportation planning, and a new transportation mode for developing the models for shared E-scooters is lacking both domestically and internationally. This study aims to develop a trip generation model for shared E-scooters using significant variables by thoroughly reviewing previous studies. The trip characteristics of major service areas and other areas may differ owing to the trip characteristics of the mode. The trip generation models were developed based on the service trip density by dividing the areas by service level. The factors affecting shared E-scooter trips in major service areas included the presence of universities, closeness centrality, and cultural areas, while factors affecting the trips in minor service areas included the presence of universities, betweenness centrality, and trip distance. The developed models provide basic information that can be used to establish transport policies for introducing shared E-scooters in cities in the future.