• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.15-22
• /
• 2013

By changing from ballasted track to concrete slab track, new type railroad subgrade is strongly required to satisfy strict regulations for displacement limitations of concrete slab track. In this study, sensitivity analysis was performed to assess the design characteristics of new type reinforced railroad subgrade, which could minimize residual settlement after track construction and maintain its function as a permanent railway roadbed under large cyclic load. With developed design program, the safety analysis (circular slip failure, overturning, and sliding) and the evaluation of internal forces developed in structural members (wall and reinforcement) were performed according to vertical installation spacing and stiffness of short and long geotextile reinforcement. Based on this study, we could evaluate the applicabilities of 0.4 H short geogrid length with 0.4 m vertical installation spacing of geotextile as reinforcement and what the ground conditions are for the reinforced railroad subgrade. And also, we could grasp design characteristics of the reinforced railroad subgrade, such as the importance of connecting structure between wall and reinforcement, boundary conditions allowing displacement at wall ends to minimize maximum bending moment of wall.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.155-162
• /
• 2006

An abnormal seepage flow, which is mainly caused by the piping, is one of the major reasons for embankment dam failure. A leakage detection is therefore a vital part of an embankment dam's monitoring. Resistivity method, which is an efficient tool to detect leakage zones, has been used all over the world for an embankment dam's monitoring. Although the resistivity method gives us very useful information about the leakage problem, there is no more quantitative interpretation than the low resistivity zones in the 2-dimensional resistivity section are regraded simply as the anomalous seepage zones. Recently, resistivity monitoring technique is applied for the detection of leakage zones. However, its interpretation still remains in the stage of presenting the resistivity ratio itself. An increased seepage flow increases a porosity and an increasing porosity decreases the dam's stability. Therefore, the porosity is one of the major factors for an embankment dam's stability. Based on Archie's experimental formula, we try to evaluate a porosity distribution from the resistivity data which is obtained on the dam's crest. We also attempt to represent a procedure to evaluate a safety index of the embankment dam from the resistivity monitoring data.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.511-516
• /
• 1992

The x-values of the nonstoichiometric compound YbO$_x$ have been measured in a temperature range of 600 to 1150$^{\circ}C$ under oxygen partial pressure of 1.00 ${\times}$ 10$^{-2}$ atm∼atmospheric air pressure. The values are varied between 1.55453 and 1.60794 in the conditions. The enthalpy of the formation for x' in YbO$_{1.5＋x'}$(${\Delta}$H$_f$) was 1.55, 1.18, and 1.05 kJ/mol under the above conditions, respectively. The electrical conductivities of the oxides or ${\sigma}$ have been measured in the temperature range from 600 to 1100$^{\circ}C$ under oxygen partial pressure of 1.00 ${\times}$ 10$^{-5}$ ∼ 2.00 ${\times}$ 10$^{-1}$ atm. They varied from 10$^{-9}$ to 10$^{-5}$ ohm$^{-1}$ cm$^{-1}$ within the semiconductor range. The Arrhenius plots of the electrical conductivities show a linearity and the activation energy for the conduction was about 1.7eV. The oxygen partial pressure dependence of the conductivity or 1/n value increases with the pressure. The nonstoichiometric conduction mechanism of the oxide was discussed in terms of the x values, ${\sigma}$ values, and the thermodynamic data.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.191-196
• /
• 1992

Reaction of N,N-dimethylaniline(N,N-DMA) and iodine in $CHCl_3,\;CH_2Cl_2 : CHCl_3$(1:1), $CH_2Cl_2$(1:1), and CH2Cl2 has been studied kinetically by using conductivity method. Pseudo first-order rate constants ($k_{obs}$) and second-order rate constants ($k_{obs}$/[N,N-DMA]) are dependent on the N,N-DMA concentration. Second-order rate constants obtained were decreased with increasing N,N-DMA concentration. We analysed these results on the basis of formation of charge transfer complex as a reaction intermediate. From the construction of reaction scheme and activation parameters for the formation and transformation of charge transfer complex. The equilibrium constants decreased when the dielectric constant of solvent was increased, and the value is 1.9${\sim}$4.2$M^{-1}$. The rate of transformation are markedly affected by the solvent polarity.${\Delta}H^{\neq}$ is 6.3-12.6kJ/mol, and ${\Delta}S^{\neq}$ is large negative value of -234J/mol K.

• Journal of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.110-118
• /
• 1981

Kinetics and mechanism for the reaction of substituted phenacyl bromides with substituted pyridines have been determined at 25, 35 and $45^{\circ}C$ in methanol and dimethylformamide by the conductivity method. The rate constants for the reaction of various pyridines with phenacyl bromide shown that electron-donating substituents in the pyridine increase the rate, while electron-attracting one decrease in both solvents. The effect of substituents in substrate, the rate being increased by electron-attracting substituents. This is as expected for nucleophilic attack of amines on the carbon atom. Isokinetic and $Br{\psi}nsted$ linear relationship were shown in the reaction of phenacyl bromide with pyridines in both solvent in which isokinetic temperature were obtained 614, $202^{\circ}K$ and ${\beta}$ values were 0.29, 0.36 in methanol and dimethylformamide respectively. In the case of the reaction of substituted phenacyl bromide with pyridines, isokinetic temperature decreases with increasing electron-attracting ability of the substituents in the phenacyl bromide, while the ${\beta}$ values were reverse. From the above results, it can be inferred that N…C bond formation decreases progressively from p-chloro- to p-methoxyphenacyl bromide and the bond formation predominates in DMF than methanol. The ${\rho}$ values of Hammett equation of the reaction of phenacyl bromide with substituted pyridines are negative in both solvent, but its value was larger negative in DMF than methanol and the ${\rho}$ value of that of substitutted substrates with pyridine was 0.3, the low value is ascribed to direct $S_N2$ attack of the nitrogen atom in pyridine ring at the methylene carbon.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.530-535
• /
• 2009

Dicyclohexyl telluride was obtained in a high yield by the reaction of cyclohexyl bromide with NaTeH(prepared in situ) in an aqueous ethanolic solution. A series of new organotelluronium salts of the general formula ${(cyclo-C_6H_11)}_2Te(R)X$ (where R = $CH_3$, X = I (1); R = $C_2H_5$, X = Br(2); R = $C_2H_5$, X = I (3); R = C_3H_5$, X = Br (4)) were prepared by the reaction of ${(cyclo-C_6H_11)}_2Te$ with the corresponding alkyl halide. Reaction of 1 with NaBPh4 gave compound 5 ( i.e. R = CH3, X = BPh4 ‒) in 78% yield. Reaction of ${(cyclo-C_6H_11)}_2Te$ with benzyl bromide and 4-bromophenacyl bromide gave unexpectedly dibenzylcyclohexyltelluronium bromide (6) and bis(4-bromophenacyl)cyclohexyltelluronium bromide (7), respectively. Reaction of 6 with NaBPh4 gave the corresponding tetraphenylborate derivative (8) in high yield. $^1H$ NMR studies revealed that in $CDCl_3$solution compound 1 eliminated alkyl halide. Conductivity, IR, $^1H\;and\;^{13}C$ NMR and thermal data for the new compounds are presented and discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.803-810
• /
• 2013

The purpose of this research is to analyze the effect of shape of the inductive textile electrode on the non-contact heart activity sensing, based on the magnetic-induced conductivity principle. Four types of the inductive textile electrodes were determined according to the combinations of the two shape features. A fiber-metal hybrid-typed conductive thread was developed and applied to materialization of the textile electrodes by embroidery method. The heart activity was extracted through the textile electrode sewn on a T-shirt. The experiments were implemented to constantly measure the heart activity for 20 seconds, in each case of 5 healthy male subjects. The heart activity signals acquired in each type of the inductive textile electrode were analyzed, 1)by drawing a comparison of morphology with those of ECG signal (LeadII), and 2)by calculation of the normalized mean and standard deviation of magnitude of the heart activity signals. The analysis resulted that the relatively better quality of signals were acquired in the 'square' types in the matter of whole shape, while the better results were obtained in 'donut' types in the matter of center hole. Accordingly, the relatively best quality of signals was obtained in the case of 'Square-Donut' type of the inductive textile electrode.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.28-37
• /
• 2011

Spectroscopic (infrared, electronic and $1^H$-NMR), elemental analyses CHN, molar conductivity, thermogravimetric analyses (TGA/DTG) and biological studies, of both benzanthrone derivatives 3-N-2-hydroxy ethylamine benzanthrone (HEAB) and 3-N-2-amino ethylamine benzanthrone (AEAB) with Cu(II), Co(II) and Ni(II) chlorides were discussed herein. Based on the above studies, HEAB ligand was suggested to be coordinated to each metal ions via hydroxo and amino groups to form [Cu(HEAB)$(Cl)_2$].$2H_2O$, [Co(HEAB)$(Cl)_2(H_2O)_2$].$8H_2O$ and [Ni(HEAB)$(Cl)_2(H_2O)_2$].$7H_2O$ coordinated complex. On the other hand, AEAB has an octahedral coordinated feature with formulas [Cu(AEAB)$(Cl)_2(H_2O)_2$].$2H_2O$, [Co(AEAB)$(Cl)_2(H_2O)_2$].$4H_2O$ and [Ni(AEAB)$(Cl)_2(H_2O)_2$]. $6H_2O$. The molar conductance values at $25{\circ}C$ for all complexes in DMF are slightly higher than free ligands; this supported the presence of chloride ions inside the coordination sphere. Both benzanthrone ligands and their complexes have been screened against different kinds of bacteria.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.21-21
• /
• 1998

새로운 에너지원으로 각광받고 있는 연료전지는 우주선 동력윈으로서의 이용이래, 보다 실용적인 발전 시스템을 목적으로 많은 연구개발이 시도되고 있다. 이러한 연료전지는 사용하는 전해질의 특성으로 인하여 저온형($<300^{\circ}C$) 과 고온형($500^{\circ}C<$)으로 구분된 수 있는데, 저온형 연료전지의 경우는 전극반응 특성상 귀금속 촉매가 필요한 데 비해, 고온형 연료전지는 이러한 귀금속 촉매가 필요없다는 점등에서 다양한 장점을 가지게 된다. 즉, 저온형에 비해 다양한 연료가 가능하고, 대형화에 유리함며, 고온 페열을 이용할 수 있는 점 등을 들 수 있다. 용융탄산염형 연료전지(MFCFC)는 이러한 고온형 연료진지의 장점을 배경으로 현재 대규모의 개발이 진행되고 있다. 그러나 여기에 주로 사용되는 Li-K, Li-Na와 같은 용융탄신엽은 고부식성 전해질로서 대부분의 금속이 산화물을 형성하는 것으로 알려져 있다. MCFC의 분리판은 셀간을 전기적으로 이어주는 역할, 가스의 유로제공 및 가스 Sealing의 역할을 담당하는 부분으로서, 분리판의 부식은 이러한 특성의 저하 및 전해질의 소모를 유발시켜 MCFC의 내구성에 커다란 영향 을 미치는 요인으로 생각되고 있다. 이러한 배경으로부터 Uchida 그룹은 MCFC의 분라판 재료 의 부식거동을 계동적으로 검토하였다. 먼저 Fe에 Ni 과 Cr을 첨가한 재료를 산화성가스 분위기하에서 $(Li+K)CO_3$에 대하여 검토한 결과, Ni과 Cr 둘다 20wt%이상 첨가시, 내식성융 가지는 결 과를 보고하였다2) 이 경우 보호피막으로서 NiO 와 $LiCrO_2$가 작용하는데, $LiCrO_2$가 용융탄산염 중에서 보다 안정한 것으로 부터, Cr의 첨가가 내식성에 기여하는 것으로 판단하였다. 다음 단계 로서 Fe/Cr재료에 용-융탄산염 중에서 안정한 산화물을 형성하는 Al의 첨가효과를 검토하였다. Al의 첨가는 더욱 내식성을 향상시키는 것이 발견되었고, 약 4wt%의 첨가로 충분한 내식성을 가지 는 것을 보고 하였다. 그러나 이러한 안정한 산화물에 의한 내식성 향상은 전기진도도의 희생을 바탕으로 한 것으로서, 다읍 단계로서 Ti산화물의 반도체적인 특성을 이용하고자 제 4의 원소로서 Ti첨가를 시도하였다. 그러나 Fe/Cr/AVTi재료가 뛰어난 내식성을 가지는 것은 관찰되었으나, 전도도 향상에는 기여하지 못하는 것이 보고되었다. 현재 MCFC는 실용화를 위한 고성능화의 하나로서 가압하에서의 운전을 시도하고 있다. 이 러한 가압하에서의 운전은 기전력의 향상 및 전극반응의 촉진 등으로 출력의 향상을 가져오나. 현재 문제로 되고 있는 Cathode극인 NiO의 용해/석출 현상을 가속화하는 결과를 초래해, 이에대 한 대책으로서 Li-K보다 NiO의 용해가 적은 Li-Na탄산염으로의 전환이 진행되고 있다. 이러한 배경으로부터 Uchida그룹에서 개발한 FeiCr/AVTi재료와 현재 분리판 재료로 사용증인 SUS 310, S SUS 316재료에 대해. 산화성 분위기의 5기압까지의 가압하에서, Li-K, Li-Na탄산염에 대하여 부 식거동을 검토한 결과, 가압하에서 내식성이 향상되는 것이 발견되었다. 이유로서는 가압하에서 용융탄산엽의 증가된 산화력으로 보다 치밀한 내식성 산화물 피막이 형성되기 때문으로 생각되고 있다. 또한 Li-K, Li-Na탄산염에서의 부식의 정도에는 차이가 거의 없었으나, SUS 316의 경우 탄산염에 젖은 부분에서 내식성 피막이 형성되지 않는 이상부식현상이 관찰되었다. 재료간의 내식성 정도에서는 Fe/Cr/Al/Ti이 가장 내식성이 뛰어났으며, SUS 310 또한 뛰어난 내식성을 보였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.2
• /
• pp.95-105
• /
• 2020

In this study, using the CADMAS-SURF model, the characteristics of the wave pressures and the wave forces were analyzed according to the installation position of the parapet on top of the caisson, and the stability evaluation was carried out using estimated wave forces for the design wave condition. Numerical results show that adopting the rear-parapet reduces the front maximum wave pressures and wave forces, and the maximum wave pressure acting on the rear-parapet increases slightly compared to the front parapet, but the wave force acting on the rear-parapet has little effect on the stability of the breakwater due to the phase difference with the wave force acting on the front of the breakwater. In addition, impulsive wave pressures did not occur, as Yamamoto et al. (2013) pointed out the problem of the rear-parapet breakwater. As a result of the stability against sliding and overturning, it was estimated that the target safety factor of 1.2 could be secured by the self-weight of 13% less than the case of the front parapet. At this time, the maximum ground pressure was also reduced by 30%, and the applicability of the rear-parapet structure to the actual site was evaluated as high.