• Journal of the KSME
• /
• v.49 no.8
• /
• pp.41-44
• /
• 2009

전도성 금속잉크 건조의 목적은 용제인 물이나 솔벤트 부분을 증발시켜 다음 작업에 지장이 없도록 하는 단순건조와 더불어 전도성을 증가시키기 위한 큐어링 작업이 포함되는 전자 인쇄회로 작업의 한 공정이다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.126-131
• /
• 2008

In this investigation, various factors affecting manufacturing conductive inks are presented, examined and discussed. The discussion includes inherent difficulties in making conductive inks successful and at the same time offers ways in which these difficulties might be overcome. One of the solutions to overcome such difficulties is to use low melting metals and alloys. This aspect is also detailed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.119-124
• /
• 2013

In this study, the two-dimensional transient temperature of printed Ag nanoparticle ink during continuous wave laser sintering was calculated. Ag nanoparticle ink was printed on a glass substrate by inkjet printing. Then, a 532-nm continuous wave laser with different laser intensities was irradiated on the printed Ag nanoparticle ink for 60 s. During laser irradiation, the in-situ specific resistance of the sintered ink was measured. To obtain the transient temperature of the sintered ink during the laser sintering process, a two-dimensional transient heat conduction equation was derived by applying the Wiedemann-Franz law. It was found that the specific resistance of the sintered ink decreased with an increase in the sintering temperature of the printed ink.

• Journal of Aerospace System Engineering
• /
• v.12 no.6
• /
• pp.1-8
• /
• 2018

ACF, which is used for the transparent electrode film is manufactured by the thermocompression method with conductive particles. However, the method has disadvantages since there are many wasted materials and the process is complex. To overcome the demerits of the conventional method, EHD printing technology with conductive particles ink is proposed. The line thickness of patterning is influenced by the characteristics of the inks and the printing conditions. Therefore, it is salient to find the most conducive conditions for the micro patterning. In this paper, the ink with conductive particles was manufactured, and the patterning results were obtained by varying the nozzle thickness and the flow rate. The electrical conductivity according to the ejection of the particles ink is obtained.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2009.10a
• /
• pp.359-367
• /
• 2009

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.97-103
• /
• 2008

In this investigation, conductivity of conductive inks was measured. A particular attention has been given to the effect of metal powders with various conductivity on the overall conductivity of the bulk ink. The conductivity of various solutions simulating conductive inks consisting of copper and silver was measured and the results have been discussed in relation to various applications of conductive inks in practice. A conductivity model simulating systems consisting of various materials has been introduced and the results were discussed. Materials of good conductivity are adversely affected by mixing with materials of poor conductivity simply through serial connection. However, parallel connection has rather little effect on the overall conductivity. The practical implication of various mixtures of materials on conductive inks has been discussed.

• Journal of the KSME
• /
• v.46 no.12 s.313
• /
• pp.45-49
• /
• 2006

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.391-392
• /
• 2008

최근 나노 금속의 대량 생산에 대한 기술이 확보됨에 따라, 메탈젯을 이용한 연구가 활발히 진행되고 있다. 메탈젯의 연구 범위는 RFID, PCB, MLCC 전극, 태양전지전극, PDP 전극, EMC용재료 등 그 응용 범위를 넓혀 가고 있다. 이러한 응용 기술 대표적인 배선형성 기술인 PCB 제조에 대한 연구는 40um 이하의 고해상도 기판 개발을 요구하고 있다. 선폭은 40um 이하를 유지하면서, 두께는 10um 이상으로 CCL을 대체 하기 위한 기판 형성 기술은 응용기술은 가장 어려운 난이도의 기술이다. 메탈젯 기술은 매우 복합적인 연구분야로 나노 재료의 개발, 인쇄공정의 개발, 기재 표면처리 기술, 헤드 기술의 개발을 동시에 만족할 때 가능하다. 배선 형성을 위하여 나노 잉크를 이용하여 직접 인쇄를 진행하고, 소결하여 전도성을 얻게 된다. 본 연구에서는 미세노즐에 토출 가능한 잉크젯용 잉크 조성을 결정하고, 기판과의 신뢰성을 확보하기 위하여 접착력의 평가, 전도도의 평가, 건조 시간 조절을 통한 Crack 문제 해결, 미세 선폭의 균일성 조절에 관한 실험을 진행하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.935-936
• /
• 2009

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.263-271
• /
• 2010

e-Printing is a new manufacturing technology for electronic products and is based on traditional printing technology. The electronic products require a large area to facilitate printing and to be economical. A gravure printing system that supports a roll to roll (R2R) manufacturing process can be used to reduce the cost and to achieve the required accuracy. Many factors such as drying method, drying temperature, tension,-printing velocity, ink viscosity, ink conductivity, pattern accuracy, and dot geometry influence the performance of printed electronics. These factors are closely interrelated. The optimum condition for printing must be determined to enhance the performance of the printed electronics. In this study, lines and areas are printed using a gravure printer with conductive ink under different conditions of the above mentioned factors. The results are analyzed to investigate the influence of various factors on the performance of the printed electronics.