• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.138-144
• /
• 2004

Satellite generates a complex electromagnetic noise by conducted and radiated coupling effect of the various electrical instruments. This noise may cause serious problems on the satellite system. To minimize the electromagnetic coupling effects and maintain the system safety margin, system noise reduction technique should be applied from the beginning of the system design. The KOMPSAT-2 system is evaluated by measuring the conducted noise on system electrical power leads and verifying a 6dB system safety margin under the complex noise environment with current injection. This paper describes the KOMPSAT-2 system evaluation result performed on ETB(Electrical Test Bed) and the analysed noise element, the analysed result will be reflected on FM(Flight Model) EMC test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1207-1215
• /
• 2008

Satellite generates a complex electromagnetic noise by conducted and radiated coupling effect of the various electrical instruments. This noise may cause serious problems on the satellite system. To minimize the electromagnetic coupling effects and maintain the system safety margin, system noise reduction technique should be applied from the beginning of the system design. The COMS system is evaluated by measuring the conducted noise on system electrical power leads at PSR(Power Supply Regulator) and verifying a 6 dB system safety margin under the complex noise environment with current injection. The radiated noise due to the complex transmit antenna configuration is evaluated by integrating all unit-level RE measurement results, and the RF compatibility between spacecraft and launch vehicle is analyzed with the above estimations. This paper describes the COMS EMC compatibility analysis with respect to each unit level EMC test results, and RF compatibility analysis between spacecraft and launch vehicle. The analyzed results will be reflected on FM(Flight Model) EMC test.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.278-280
• /
• 2004

본 논문의 내용은 다중전극에 전기 중합한 전도성 고분자를 이용하여 약물을 결합한 후 전압 인가에 의한 선택적인 약물방출을 구현하는 것이다. Glass wafer에 anode와 cathode 전극을 제작하고 4개의 anode 전극면에 각각 전기중합으로 전도성 고분자막을 합성하였다. 양이온성 약물인 lidocaine을 결합할 수 있도록 피롤과 함께 도펀트로써 분자량이 큰 DBS를 사용하였으며 고분자막의 이온출입원리를 이용하여 약물을 결합하고 방출하였다. Cyclic voltammogram로부터 PPy(DBS) Polypyrrole (dodecylbenzene sulfonate) 전극의 산화 환원특성 및 전극면에 PPy(DBS) 막이 생성되기 위한 조건을 확인하였고, 그 결과를 토대로 PPy(DBS)막을 3전극 시스템과 Coulometry를 이용하여 전압을 인가하여 합성하였고, 합성전하량으로 부터 PPy(DBS)막의 두께를 알 수 있었다. Lidocaine의 결합 및 방출 시에도 정전압을 이용하였으며 약물의 방출 유무를 확인하기 위하여 UV spectrometer를 사용하였다. 다중전극에 PPy(DBS)막을 1.5um 두께로 합성한 후 lidocaine을 결합시키고 선택적으로 약물을 방출한 결과 각각의 PPy(DBS)막으로부터 $1.4{\sim}1.7mg$의 약물이 방출됨을 확인 할 수 있었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.82-83
• /
• 2003

일반적인 PDP (Plasma display panel)용 전도성 저방출(low-e) 필터는 유리 기판 위에 굴절률이 높은 금속 산화물 유전체 박막과 Ag와 같은 귀금속 박막이 번갈아 쌓인 [유전체｜금속(Ag)｜유전체]가 기본 구조인 다층 박막의 형태로 개발되어 왔다. Ag는 가시광선 영역에서 다른 금속보다 작은 흡수를 보이고 전도성이 뛰어나 전자파 차페용 필터의 전도성 박막으로 널리 쓰인다. 그리고 이러한 구조에서 가시광선의 높은 투과율을 유지하면서 유해 전자기파를 차폐할 수 있도록 충분한 전도성을 갖추기 위해서는 2층 이상의 Ag 박막이 존재하도록 설계되며 유전체 박막과 금속 박막 사이에 1∼2 nm 정도의 매우 얇은 금속 보호 층을 사용한다. (중략)

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1544-1544
• /
• 2015

재료의 종류 및 특성에 따른 전기 반응 약물방출 특성을 확인하기 위하여 전압을 이용한 약물방출 시스템을 설계 하였으며 각각의 재료의 특성에 따른 약물방출 특성을 확인하였다. 약물방출은 활성탄소섬유에 친수성 관능기를 도입할 경우 방출되는 약물의 양이 37% 감소하였다. 한편 PVA에 카본블랙을 첨가하여 전도성을 향상 시킨 경우 11%의 약물만을 방출하던 PVA가 대부분의 약물(98%)을 방출하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.82-90
• /
• 2013

In this paper, conducted emission from the MDS(Motor Drive System) of a HEV/EV was analyzed using high- frequency circuit modeling in system-level approach. The conducted emission by PWM process can cause RFI(radio- frequency interference) problems in the AM/FM frequency range. In order to mitigate this conducted emission, a high-frequency equivalent circuit model is proposed by analyzing the fundamental circuits, parasitic components in their parts and connections and non-linear characteristics of IGBTs, high-power capacitors, inverters, motors, high-power cables, and bus bars which are composed of the MDS. It is confirmed that the simulated result by the proposed model is well agreed with measured results in spite of a large-scaled analysis in system level. We are looking forward that this approach can be effectively used in the EMC design of HEV/EV.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.23-28
• /
• 2016

In this study, an investigation study on EMC(Electromagnetic Compatibility) is presented for power converter circuit. A DC-DC power converter circuit using LT3652 chip is designed and fabricated. The simulation results using ANSYS SIwave for far field radiation and unwanted emissions are presented. To minimize the unwanted emissions, we design a optimized circuit by using capacitors and ground posts. The conducted and radiation emissions are measured in the EMC test chamber based on standardized testing procedures of CISPR 22. The measured EMI emission values for a power converter circuit are presented and compared with the original circuit. The results show that the unwanted emissions from the circuit are tremendously diminished due to the applied EMI reduction techniques. The results proposed here can be usefully applied on designing power converter modules.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.194-195
• /
• 2002

투명 전도성 박막은 저방출 코팅, 평판디스플레이의 투명전극, 플라즈마 디스플레이 패널(PDP)의 전자파 장해 차폐 둥의 넓은 영역에서 사용되고 있다 특히 PDP의 전자파 장해(electromagnetic interference; EMI)를 막기 위한 필터는 광학적으로 가시광선영역의 높은 투과율과 전도성이 우수한 전기적 특성을 갖고 있어야 한다 이러한 고 효율의 투명전도성 박막은 일반적으로 (산화물-금속-산화물) 형태로 제작된다(1). (중략)

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.161-167
• /
• 2010

CEU(Camera Electronic Unit) loaded in optical satellite for a high resolution image acquisition is composited with CC(Camera Controlloer), FPA(Focal Plane Assembly) and CEUP(CEU Power supply). EMC test and analysis results are explained in this paper. CE, CS, RE and RS test is performed in the 1st EMC test, RE, RS test which is not complied and influence considerably after shielding structure is performed in the 2nd EMC test. An effect due to the noise of CEU in the GPS/S-band receiving band is analyzed based on 2nd EMC test results. Margin more than 6dB is guaranteed when CEU is shielded.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.798-804
• /
• 2013

In this paper, conducted emission from the LDC(Low-Side DC/DC Converter) of a HEV/EV was analyzed using high-frequency circuit modeling in system-level approach. The conducted emission by PWM process(100 kHz; Switching Frequency) can cause RFI(Radio-Frequency Interference) problems in the AM/FM frequency range. In order to mitigate this conducted emission, a high-frequency equivalent circuit model is proposed by analyzing the fundamental circuits, parasitic components in their parts and connections and non-linear characteristics of MOSFETs, high-power capacitors, inverters, motors, high-power cables, and bus bars which are composed of the LDC. Using these circuit models, results of both simulation and measurement were compared and similarities between them were verified. We are looking forward that this approach can be effectively used in the EMC design of HEV/EV.