• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.422.1-422.1
• /
• 2014

E-textile과 같은 웨어러블 전자소자는 휴대용 전자소자, 의료센서 및 디스플레이 등을 포함하는 다기능 직물등의 적용가능 응용분야에서의 잠재력으로 인하여 많은 관심을 가지고 있다. 따라서 본 논문에서는 이같은 응용분야에 적용하기 위하여 전기방사를 이용한 나노크기의 나일론 섬유를 제작하고 reduced graphene oxide를 섬유에 코팅하여 전도성을 가지는 나노섬유를 제작하였다. 나일론 알갱이를 포름산에 녹인 용액을 이용하여 전기방사를 통해 약 100 nm 두께를 가지는 나노섬유를 제작하였다. 제작된 나일론 섬유와 그래핀 옥사이드 사이의 결합력을 향상시키기 위하여 BSA(bovine serum albumin)으로 표면 처리를 하였다. 마지막으로 나일론 섬유에 코팅된 그래핀 옥사이드를 hydrazine을 이용하여 환원하여 전도성을 가지는 섬유를 제작하였다. 제작된 전도성을 가지는 섬유는 약 10 kohm 정도의 저항을 가지는 것을 확인하였으며, 물리적인 외부 변형에서도 안정적으로 전도성을 가지는 것을 확인하였다. 이러한 전도성을 가지는 나노섬유는 웨어러블 전자소자를 제작하는데 응용 가능할 뿐만 아니라, 전기방사를 통한 나노구조물 제작 기술을 가스센서, 바이오센서, 태양전지, 나노소자등 다양한 분야에 적용 가능한 우수한 기술이라고 생각한다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.39-53
• /
• 1991

디지탈 기기를 포함한 일반적인 전기전자기기로 부터 발생하는 방해전자파는, 낮은 주파수 대역(MF, HF 대역)에서는 전원성 등의 도선을 따라서 전달(전도성 방해파)되고, 높은 주파수 대역(VHF, UHF 대역)에서는 직접 공간에 방사(방사성 방해파)된다. 이러한 전도성 및 방사성 방해파의 측정은 IEC, CISPR, FCC, VDE 등의 규격이 정하고 있는 규정에 따라서 실시된다. 이들 규격은 방해파 측정법을 규정하고 있을 뿐만 아니라, 재현성이 좋은 측정을 실현시키기 위해 측정용 시설에 대해서도 자세하게 규정하고 있다. 방사성 방해파의 측정에 사용하는 측정시설로서는, 기본적으로 야외시험장(Open Area Test Site, OATS)을 사용하도록 규정하고 있는데, 측정치의 상호연관성을 위해서는 규약에 정해진 적합성이 평 가되고 확인되어 있어야만 한다. 여기서는 방사성 방해파 측정용 시설중에서 가장 기본적이고도 중요한 야외시험장의 적합성 평가 파 라미터 - 두 지점간의 전송손실, 이를 시험장감쇠량 이라함 - 에 대하여 기술하기로 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.130-130
• /
• 2015

최근 산업에서 나노섬유의 관심이 많아져서 많은 연구가 진행되고 있는데, 그 중 전기방사법을 이용한 나노섬유 제조는 간단한 공정으로 다양한 두께를 가진 긴 섬유를 만들 수 있다. 특히 금속 나노섬유는 다양한 산업 분야에서 이용되고 있다. 폴리머를 이용하여 방사 용액을 만들어 전기 방사 조건을 도출 할 수 있었다. metal precursor wt.%를 조절하여 100nm 이하의 전도성 금속 나노섬유를 만들었다.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.434-439
• /
• 2012

To improve the performance of ionic polymer-metal composite (IPMC) actuators, Nafion films sandwiched with Nafion/conducting nanoparticulate electrospun webs were used as polymer electrolytes of IPMC. Multiwalled carbon nanotube (MWNT) and silver were the conducting nanoparticulates and the nanoparticles dispersed in a Nafion solution were electrospun. IPMCs with the Nafion/conducting nanoparticulate electrospun webs displayed improved displacements, response rates, and blocking forces. MWNT was superior to silver in terms of displacement and blocking force, and the webs without the conducting fillers also caused enhanced performances compared with the conventional IPMCs. These improvements were attributed to an elevated electrolyte flux through highly porous interlayers and capacitance induced by well dispersed conducting fillers, and low interfacial resistance between electrolyte and electrodes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2770-2776
• /
• 2015

The development of efficient wearable antennas is required to implement short range body-centric wireless communication links for various internet of thing applications. We present simulation and measurement results of conductive-fiber-based wearable antennas which can comfortably fabricated directly on usual clothing materials. The proposed antenna is a form of a rectangular patch antenna designed by weaving conductive fibers on a felt substrate. A full-wave electromagnetic simulation tool is used to investigate the antenna performance such as antenna impedance, resonant frequency, and radiation efficiency. Parametric studies show that the radiation efficiency increases from 67.5% to 70.4% by widening the gap between conductive fibers from 0.25mm to 3mm. This implies a wearable antenna with good radiation efficiency can be designed despite of less portion of conductive fibers on the antenna. The simulation results are also verified by measured results with fabricated antennas.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.47-52
• /
• 2020

In this study, a simulation investigation was conducted on the method of reducing switching noise and spurious emission among design methods for step-down DC-DC converter modules for automotive. A typical 4-layer converter circuit using a PMIC(Power Management Integrated Circuit) chip was presented, and the simulation results of conductive emissions at two input terminals (+, -) and the point between the input filter and the PMIC was performed in the 1.0~5.0MHz band and the 100MHz band. The results for the conducted and radiated emissions in the HF(3~30MHz) and VHF(30-300MHz) bands were presented. It showed an improvement of about 10dB over the bands by routing the output terminal placed on the 3 or 4-layer in the opposite direction to the input terminal. The result of this study is expected to be useful in the design of the DC-DC converter modules in the future because it gives a better improvement compared to the existing methods.

• Ceramist
• /
• v.16 no.1
• /
• pp.67-80
• /
• 2013

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2
• /
• pp.133-141
• /
• 2020

A geological repository comprises a natural barrier and an engineered barrier system. Its design components consist of canisters, buffers, backfill, and near-field rock. Among the engineered barrier system components, bentonite buffers minimize the groundwater flow from near-field rock and prevent the release of nuclide. Investigation of the hydraulic conductivity of the buffer to groundwater flow is an important factor in the performance evaluation of the stability and integrity of the engineered barrier of the repository. In this study, saturated hydraulic conductivity tests were performed using Gyeongju bentonite at various dry densities and temperatures, and a hydraulic conductivity prediction model was developed through multiple regression analysis using the 120 result sets of hydraulic conductivity. The test results showed that the hydraulic conductivity tends to decrease as the dry density increases. In addition, the hydraulic conductivity increased with increasing temperature. The multiple regression analysis results showed that the coefficient of determination (R²) of the hydraulic conductivity prediction equation was as high as 0.93. The hydraulic conductivity prediction equation presented in this study could be used for the design of engineered barrier systems.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.10a
• /
• pp.411-412
• /
• 2011

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.173-181
• /
• 2007

Radiated emission / susceptibility performance of the KSLV-I 2nd stage which are controlled from the unit level to the system level should be examined and managed all over the frequency ranges in order to ensure the normal operation of the SC, the 1st stage of the KSLV-I, ground support equipments which are installed at the space center, and other wireless communication networks. Not only unintentional electric field emissions from the KSLV-I system and its subsystems should be restricted to the levels less than the limits specified in the EMC requirements, but also proper test and evaluation method should be established, respectively. In this paper, radiated emission/susceptibility test limits, method, and test results of the KSLV-I 2nd stage engineering model are presented.