• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.267-275
• /
• 2012

In this study, normal wind load and blast wind load are modeled mathematical. And the periodical torque and bending moments transmitted to the main shaft of wind turbine are investigated. A normal wind model assumed, of which the wind velocity is increased according to the height from ground. The average values and the harmonic terms of the transmitted moments are studied on the wind direction of range $-45^{\circ}{\sim}45^{\circ}$ and the bending moment characteristics are examined, which is regarded as the main source of the misalignment of gear train. In normal wind load case, excitation frequency is 3X (X : Rotor speed). When the wind direction is $+22.5^{\circ}$, the horizontal axis of bending moment occur the 50% of main torque. This result leads to edge contact of gear teeth by shaft elastic deformation. In blast wind load case, excitation frequency are 3X,6X,9X. Additional, in the (+) direction of wind load, relative harmonic percentage is increase.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.393-403
• /
• 2018

Although the use of silicone hydrogel contact lenses which are known to have high oxygen transmissibility is increasing, they are being sold without any product labeling of physical properties such as water content and oxygen transmissibility. To analyze the physical properties such as the water content and oxygen transmissibility of approved silicone hydrogel contact lenses, this study collected and analyzed the approval information published on the KFDA website. Of 68 cases of domestic silicone hydrogel contact lenses analyzed in this study, 61 cases (89.7%) did not meet the international standard for oxygen permeability. This is because lenses that are not different from hydrogel contact lenses were submitted for approval as silicone hydrogel contact lenses because there is no domestic standard for silicone hydrogel contact lenses. In future, besides the information published on the website, analysis of the physical properties of a wide variety of actual silicone hydrogel contact lenses on the market is required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.275-284
• /
• 1992

A generated problem in treated highly concentrated organic wastewater by activated sludge process is the limitation of biomass concentration and oxygen transfer capability in aeration tank. To overcome the limitation, the deep shaft activated sludge process which has high oxygen transfer capability was applied to the wastewater treatment process. This paper investigated the characteristics of liquid circulation, oxygen transfer and biological treatment of paper mill wastewater by the deep shaft activated sludge process. From the obtained results, it was found that the oxygen transfer capability in the deep shaft system was much greater than those in the conventional aeration systems and almost tantamount to the pure oxygen system. The deep shaft system could treat highly concentrated organic wastewater by higher biomass concentration and organic loading rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.377-383
• /
• 2003

As the high-speed data communications such as xDSL using the existing copper cable come into wide use, the electromagnetic coupling characteristics of telecommunication cables become more significant. In order to describe the screening performance of telecommunication cable, the transfer impedance of cable shield is required. This paper describes the transfer impedance for two types of telecommunication cables using the line injection method of IEC 96-1. Results are analyzed to show how the materials of cable shields, the positioning of the injection line and of the inner conductor of the CUT(Cable Under Test) affect the value of transfer impedance. We then propose the transfer impedance model of telecommunication cable based on the measurements.

• Fire Science and Engineering
• /
• v.18 no.2
• /
• pp.41-48
• /
• 2004

We have conducted a numerical simulation under three-dimensional unsteady conditions in order to analyze the characteristics of $CO_2 $;, extinguishant transfer by varying the location of the injection nozzle, which affects the effect of a $CO_2 $;, fire fighting system used in the form of fixed systems for the marine engine room. Flow fields and $CO_2 $;, concentration fields were measured according to the location of the injection nozzle. In the case of arranging the injection nozzle on the center of the ceiling, the low-normal concentration distribution was developed along the $CO_2 $;, jet due to the downward flow created by impinging ceiling jets in the symmetric plane. The concentration line reaches its peak due to the mass transfer of $CO_2 $;, at the comer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.515-519
• /
• 2002

자동차 및 유체기계의 흡기계나 배기계에 사용되는 소음기의 음향성능은 전달손실로 기계성능은 배압으로 표현된다. 유체가 흐르는 관 사이의 임피던스 부정합을 이용하는 반사형 소음기의 경우, 내부 유로에 천공을 주어 음향감쇠를 시키거나 유동을 안정시키는 경우가 많다. 본 연구에서는 동심관형 공명기의 내부 관에 존재하는 천공의 분포 양상이 소음기의 전달손실과 배압에 미치는 영향을 실험을 통하여 고찰하였다. 내부관의 평균 천공율은 일정하지만 길이 방향을 따라서 천공율이 변하는 다섯가지의 공명기에 대한 실험을 수행하고, 성능에 미치는 영향을 살펴보았다. 전달손실은 천공요소의 임피던스 모델을 고려하여 예측한 결과와 비교하였고, 측정된 배압은 모의 해석 결과와 비교하였다. 분석 결과, 천공율이 점점 작아지는 분포나, 작았다가 커진후 다시 작아지는 형태의 분포를 가질 경우, 배압 측면에서 매우 유리하고, 음향 전달손실도 큰 차이가 없음을 밝혔다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.28-30
• /
• 2002

무선 브리지는 지리적으로 떨어져있는 여러 네트워크들을 무선 인터페이스를 이용하여 하나의 지역 네트워크로 통합한다. 네트워크간 패킷 전달이 단일 장비 내에서 이루어지는 전통적인 유선 브리지와는 달리, 무선 브리지는 두개의 무선 브리지 장비가 하나의 논리적 브리지를 구성하게 된다. 따라서, 무선 네트워크 인터페이스를 통한 무선 브리지간 패킷 전달의 속도와 효율이 무선 브리지에 의해 통합된 브리지 네트워크의 성능에 많은 영향을 미치게 된다. 본 논문에서는 무선 네트워크 인터페이스를 통한 무선 브리지간의 패킷 전달에 적용될 수 있는 효과적인 패킷 전달 기법을 제시한다. 제시 된 기법은 무선 인터페이스의 특성에 독립적이고, 무선 브리지 사이의 패킷 전달효율을 높일 수 있다. 그리고, 제시된 기법을 적용한 무선 브리지를 구현하고, 실험을 통해 성능을 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.477-485
• /
• 2012

Fluid flow and heat transfer in horizontal ducts are strongly coupled with large changes in thermodynamic and transport properties near the critical region as well as the gravity force. Numerical analysis has been carried out to investigate convective heat transfer in horizontal rectangular ducts for water near the thermodynamic critical point. Convective heat transfer characteristics, including velocity, temperature, and the properties as well as local heat transfer coefficients along the ducts are compared with the effect of proximity on the critical point. When there is flow acceleration because of a density decrease, convective heat transfer characteristics in the ducts show transition behavior between liquid-like and gas-like phases. There is a large variation in the local heat transfer coefficient distributions at the top, side, and bottom surfaces, and close to the pseudocritical temperature, a peak in the heat transfer coefficient distribution resulting from improved turbulent transport is observed. The Nusselt number distribution depends on pressure and duct aspect ratio, while the Nusselt number peak rapidly increases as the pressure approaches the critical pressure. The predicted Nusselt number is also compared with other heat transfer correlations.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.169-174
• /
• 2006

The Korean peninsula has been considered as seismically intermediate region, since seismic activities have been not severe for long time and the active tectonic boundary is also located far away. However, the activities of earthquakes have been increased for last decade. significantly. Since currently important structures and facilities are increasing rapidly in the Korean Peninsula, the importance of seismic design are increasing exponentially too. This study used observed ground motion of Fukuoka event including 11 afterschocks and then estimated seismic parameters representing seismic source, propagation effect, and site effects. The results were comparable to those of other studies. The results could be used seismic design of the important structures and facilities in Korean peninsula.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.56-61
• /
• 1995

많은 공학자들은 기계 재료의 종류 및 형태에 따른 정적, 동적 특성 연구를 수행해 왔다. 특히 산업적으로 그 활용도가 높은 평판 재료에 대한 진동 특성 연구는 많이 이루어졌다. 최근에는 진동 특성을 해석하는 방법도 부분구조합성법, 감도해석법 등의 방법으로 연구가 활발히 이루어지고 있다. 한편 평판의 진동이 공기와 같은 매질로 상호 작용을 하며, 막힘이 없는 공간으로 음향을 방사하는 현상에 대한 연구도 이루어지고 있다. 그러나 평판 재료를 사용하여 기계 구조물을 제작하는 경우 많은 경우에 구조물간 결합에 의해 폐공간이 형성되고 이러한 폐공간에 의해 평판의 진동이 구조-음향 연성 현상이 발생되고, 이에 따라 평판의 진동 특성도 달라지게 된다. 이러한 구조-음향 연성에 대한 연구는 1978년 Wayne B.McDonald와 C.Kearney Barton, 1979년 R.Vaicatis에 의해 폐공간 내로의 음향 전달 현상을 연구하며 이루어졌다. 최근에 연구 동향은 이장명의 FEM과 BEM을 이용한 폐공간 내로의 음향 전달 현상을 연구하였고, V.B.Bokil에 의해 구조-음향 연성된 평판의 모드 해석 방법이 연구되었다. 한편 V.Martin에 의해 능동 소음 제어의 모델링을 좀더 정확히 하기 위해 구조 연성계를 고려한 연구도 수행되었다. 연구 결과 구조-음향 연성에 의한 평판의 고유진동수 변화를 구하였고 이 때에 경계조건을 만족하는 직교다항식을 이용한 Rayleigh-Ritz 방법을 이용하였다. 또한 이러한 해석은 실험과도 매우 잘 일치함을 알 수 있었다.