• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.162-167
• /
• 2000

Construction machinery includes an engine enclosure separated from a cooling system enclosure by a wall to reduce noise and advance cooling system performance. For this structure, however, the axial fan cannot be of benefit to the engine room, and so the temperature rise in the engine room makes several bad conditions. This paper proposes that hot air in engine room is evacuated tv secondary pipe using jet pump. This paper demonstrates the structure and the effect of jet pump and useful guideline on design of area, length, and shape of secondary pipe to maximize the effect of jet pump.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.446-451
• /
• 2011

External vibration occurred during vehicle's movement can affect performance of communication equipment and reliability of internal critical components of it. Therefore, through environmental testing, verification is performed prior to system test in order to prevent these problems. In this study, anti-vibration design is applied to compensate for the failure in certain frequencies during environmental test. Through the dynamic analysis according to the changes of mount configuration, optimization of the mount assemble structure was performed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1032-1037
• /
• 2003

This work measured the hand-transmitted vibration due to shipyard worker's grinding and assessed the vibration exposure for predicted 10% prevalence of vibration-induced white finger in a group of exposed persons according to test procedure of ISO 5349-1. And also the transmissibility performance of resilient material, mainly applied to anti-vibration gloves in present market was measured on the basis of ISO 13753 and confirmed that the material would Probably not provide greater attenuation below 30㎐, the dominant frequency range of hand-transmitted vibration due to grinder.

• Journal of KSNVE
• /
• v.2 no.2
• /
• pp.99-106
• /
• 1992

The complex Young's modulus of a viscoelastic material can be obtained as a function of frequency from the measurements of relative motion between the two ends of a bar-type specimen. Non-resonance method is usually used to obtain the complex Young's modulus over wide range of frequency including resonance points, while in resonance method information at resonance frequencies only is used. However, the complex Young's modulus obtained by the non-resonance method is often unreliable in the anti-resonance frequency regions because of the measurement noise problems. In this study, the effects of the random measurement errors on estimating the complex Young's modulus are studied in the aspect of sensitivity, and how to obtain the reliable frequency region for a given measurement error level is shown. The usable frequency regions in determining the complex Young's modulus are represented by a non-dimensional parameter formed with the wave length and specimen length.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.283-288
• /
• 2006

This study developes the vibration model to estimate the vibration energy of damper/spring assembly(mainbase assembly) for car CD player, and this model is verified by experiment. From frequency response, response, we investigate the natural frequency and mode shape in the up/down direction. In order to determine the analysis frequency band, we investigate the excitation frequency from the vehicle test. As the characteristics of damper and spring is changed, we carry out the vibration test(transmissibility) and investigate the change of transmissibility.

• Solar Energy
• /
• v.15 no.3
• /
• pp.39-52
• /
• 1995

This study is investigated numerically on the heat transfer characteristics of surface radiation-natural convection interactions in a two dimensional enclosure assumed Ondol cavity. Mean Nusselt number of the bottom surface with surface radiation is increased by increasing wall emissivity and by decreasing dimensionless thickness of adiabatic wall. and is greater than that without radiation. Mean Nusselt number of the bottom surface for convection only with surface radiation is slightly smaller than that without surface radiation with decrease dimensionless thickness of adiabatic wall.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.117-124
• /
• 2005

This study developes the vibration model to estimate the vibration energy of compact disc player's mainbase assembly which is supported by dampers and springs, and this model is verified by experiment. From frequency response function, we investigate the natural frequency and mode shape in the up/down direction for mainbase assembly. In order to determine the analysis frequency band, we investigate the excitation frequency of road from the vehicle test. As the characteristics of dampers and springs are changed, we carry out the sensitivity analysis of vibration energy for mainbase assembly which include optical pick-up and feeding system. And we found out that the properties of damper were dominant element in the vibration energy of mainbase assembly's CG(center of gravity).

• Information and Communications Magazine
• /
• v.25 no.10
• /
• pp.42-49
• /
• 2008

본고에서는 센서네트워크 기술의 역사와 배경 그리고 국방분야에 적용 가능한 센서네트워크 시스템에 대해서 기술한다. 국방 센서네트워크 시스템은 다른 센서네트워크 응용분야에 비해 유선 망 및 이동통신망 시스템에서 요구하는 신뢰성 있는 정보전달, 실시간 지원 등을 요구하고 있으며 또한 다중센서를 복합적으로 이용하여 적의 침입 또는 이벤트 발생을 100% 탐지하고 오보율 낮출 수 있는 기능을 요구한다. 본고에서는 이러한 국방 센서네트워크 시스템에서 요구하는 사항들을 만족시키기 위해 시스템의 주요 구성 요소들에서 수행해야 할 기술들, 센서 신호처리 및 식별 기술, 신뢰성 있는 패킷 전달을 위한 섹터안테나 및 섹터안테나 기반의 MAC 기술 그리고 실시간과 신뢰성 보장을 위한 라우팅 기술에 대해 논의한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.251-254
• /
• 2005

In this study vibration transmissibilities of the selected anti-vibration gloves were measured, and the measurement uncertainty was estimated. Since human factors such as palm size, gripping condition and dynamic properties of the hand-arm effect the measurement a lot, it is necessary to know ow much the uncertainty is. This study takes the measurement procedure suggested in ISO 10819. Three subjects Joined at each test and each anti-vibration glove was tested twice per a subject. Average and standard deviation of vibration transmissibility were calculated and uncertainty of them were estimated at 95% confidence level.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.255-258
• /
• 2005

Recently, demands for the reduction of noise generated by transformers have been increasing. Almost all the noise generated by a transformer is a result of magnetostrictive vibration in the core. The noise radiates into the atmosphere from the tank through the insulation oil. One method of reduction such a noise is to build a free-standing enclosure of concrete and steel plates around the transformer. However, this method has some disadvantages, for example, a large area is needed for equipment installation. In this paper, the vibration and noise effects which is transferred from reinforce channel to insulation panel generated by transformer have been identified for the several kinds of insulation panel shape and damping sheet experimentally.