• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.629-634
• /
• 1998

프랑스 CEA 실험장치인 BETHSY 실험설비에서 수행된 부분충수 운전에 대한 실험인 6.9c 실험에 대한 MELCOR 1.8.3 의 평가를 수행하였다. 이 연구는 OECD/NEA 국제공동연구인 ISP-38 로 수행되었다. 평가결과, MELCOR 1.8.3 은 부분충수운전시 잔열제거계통 상실에 대한 예측능력이 있고 원자로 냉각재계통압력, 노심수위 등 전반적으로 거동을 잘 모의하고 있다고 판단되었다. 그러나 민감도 분석에서 도출된 결론에 의하여 상간의 운동량 전달 및 Liquid Entrainment모델에 있어서 개선 필요성이 있는 것으로 평가되었다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.579-584
• /
• 1997

HP Workstation 및 IBM PC에서 사용 가능한 부수로 해석 코드 MATRA $\alpha$-버전을 개발하였다. 이 코드는 정확도 향상 및 사용자 편리를 위해 COBRA-IV-I코드에 비해 여러가지 기능들이 추가되었으며, 코드의 적용 범위를 신형원자로의 비정방형 집합체 노심에 확장할 수 있도록 압력손실 모형 등이 개선되었다. 또한 이상 유동장에서의 예측 정확도 향상을 위하여 부수로 잔의 횡방향 전달 모형을 개선하였다. 코드의 예측 성능을 평가하기 위해 세 중류의 집합체 유동분포 및 엔탈피 분포 실험 자료와 비교하였으며, 그 결과 기존의 COBRA-IV-I코드보다 향상된 결과를 보였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.107-111
• /
• 1993

본 논문에서는, 특히 고효율에 따른 소음 증가문제를 해결하기 위해 실험계획법을 이용한 머플러를 설계하였고, 설계단계에서부터 시뮬레이션 검증을 통해 효율을 고려한 저소음 머플러 설계가 가능하도록 머플러의 형상을 유한요소법에 의해 모델링한 후에, 소음해석 PACKAGE인 SYSNOISE를 이용하여 전달손실(TRANSMISSON LOSS) 해석을 해석하였고, 유동해석 PACKAGE인 PHONEMICS를 이용하여 압력손실을 최소화함으로써, 효율 및 소음측면에서 기존머플러보다도 더 우수한 머플러를 설계할 수 있는 PROCEDURE를 개발하였다. 이에 따라 차후 머플러내의 냉매유동특성과 소음특성을 동시에 고려한 머플러가 설계가능하리라 생각한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.32-33
• /
• 2003

광학박막을 제작하는 많은 방법 중에서 이온빔 보조 증착방법은 이온빔을 사용해 박막에 운동량을 전달하여 주고 반응 이온빔의 산화를 촉진시켜주는 장점이 있으며, 스퍼터링은 증착입자의 에너지가 높아서 조밀하한 박막을 제작할 수 있다 그러나 단점으로 이온빔 보조 증착의 경우 증착입자가 낮은 에너지를 갖으며, 높은 에너지를 사용하는 경우 고가의 장비가 필요하게 된다. 그리고 스퍼터링의 경우 낮은 압력하에서 증착됨으로 증착률이 낮다. (중략)

• 대한공업교육학회지
• /
• v.34 no.1
• /
• pp.238-251
• /
• 2009

The noise itself that affects the sensor array is defined as the noise which happens in the place where the system is installed and the circumference noise which comes from the ocean. The array structure for detecting acoustic signal in the underwater effected turbulent layer flow noise. In this paper to design the conformal array spectral density function was introduced and several cases of flow induced noise which affect transfer function were simulated. Modified Corcos wall pressure model was used as turbulent boundary layer flow noise. The effect of noise has been reduced as integrated sum of transfer function has been reduced by decreasing elastomer thickness and density when kx is in low wave number area. Also the characteristics of transfer function by Corcos wall pressure displayed the product of frequency density function. This simulation results can be applied to the conformal array design in unmmaned underwater vehicle in the near future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.772-779
• /
• 2019

The subsea pipeline has received considerable attention as a high-value-added industry linked to the energy and steel industries including natural resource development. The design and installation of the subsea pipeline require a variety of key technologies to carry out the project. In particular, a thorough pre-verification process through pre-commissioning is essential for the safe operation of the subsea pipeline. The hydrotesting stage in the pre-commissioning process of the subsea pipeline is known to be affected significantly by the ambient temperature change; however, there is a little study based on the theoretical and numerical approach. In this study, the method of predicting the internal temperature change using the transient heat transfer method for the stage of hydrotesting during the pre-commissioning process of the subsea pipeline and the prediction method of the pressure variation in the pipeline using it were proposed. The predicted results were compared with field test results and its effectiveness was verified. The proposed analysis procedure is expected to contribute to the productivity improvement of the subsea pipeline installation project by enabling the prediction of pressure variation through pipeline heat transfer simulation from the initial design stage of the subsea pipeline installation project.

• Clean Technology
• /
• v.13 no.2
• /
• pp.151-158
• /
• 2007

An experimental study to investigate the condensing heat transfer characteristics of small diameter horizontal double pipe heat exchangers with R-22 and R-410A was performed. Experimental facility was constructed to calculate and observe HTC(heat transfer coefficients), flow patterns and pressure drop. The main components include a liquid pump, an evaporator, a condenser(test section), a sight-glass, pressure taps and measurement apparatus. Two pipes of different diameters are tested; One 5.35 mm ID 0.5 mm thick, the other 3.36 mm ID 0.7 mm thick. The mass flow rate ranged from 200 to $500\;ks/m^2{\cdot}s$ and heating capacity were form 1.0 to 2.4 kW. The flow patterns of R-22 and R-410A were observed with a high speed camera through the sight-glass. The tests revealed that HTC of R-410A was higher than that of R-22 by maximum 5%. Annular pattern was observed for the most cases but stratified flow was also detected when x<0.2. The pressure drop in 3.36 mm ID pipe was higher than that of 5.35 mm by $30{\sim}50%$. Comparing with previous correlations such as Shah, Fujii and Soliman's, Fujii' showed the best good agreement with my data with a maximum deviation of 40%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.578-588
• /
• 1997

Poly-$Si_{1-x}Ge_x$ films on oxidized Si wafer were prepared by rapid thermal chemical vapor deposition using the $SiH_4$ and $GeH_4$ gaseous mixture at various deposition conditions. The deposition temperature, $SiH_4\;: GeH_4$ flow ratio and pressure were varied from 400 to $600^{\circ}C$, 1 : 0.1-2 : 1 and 1 to 50 torr, respectively. In this work, we have investigated the change of Ge composition of poly-$Si_{1-x}Ge_x$ films deposited with the variation of deposition parameters and the effect of Ge composition on the deposition rate. From the experimental results, it was observed that the deposition rate increased with increasing deposition temperature and Ge composition. On the other hand, the Ge composition decreased with increasing temperature. As the deposition pressure increased, the deposition rate and Ge composition were increased linearly to 10 torr but increased slowly above it, which has been attributed to the slower rate of surface reaction than mass transfer.

• Journal of Sensor Science and Technology
• /
• v.3 no.3
• /
• pp.45-53
• /
• 1994

A new type of Si diaphragm was fabricated using Si-wafer direct bonding and two-step electrochemical etch-stopping methods. Using the new diaphragm structure in mechanical sensors, more precise control of cavity depth and diaphragm thickness was achievable. Also, the propagation of the stress, which was generated near the bonding interface, to the surface can be avoided. Finally, a piezoresistive-type Si pressure sensor was fabricated utilizing the diaphragm and a digital pressure gauge, which can display units of pressure, was realized.

• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.151-156
• /
• 2003

Two capacitance diaphragm gauges(CDG) and two resonance silicon gauges(RSG) were calibrated using an ultrasonic interferometer as a national low vacuum standard in KRISS. The CDG has superior pressure resolution and is rugged as well as resistant to over-pressure because of all-metal inner components. Meanwhile, the RSG is a new type of MEMS sensor that has excellent calibration stability and is resistant to mechanical shocks. The calibration uncertainties were analyzed according to the ISO procedures. Results showed that the maximum difference of the expanded uncertainties was $9\times10^{-3}$Pa at the generated pressure of 100 Pa for the two different types. It is remarkable that the RSG can be used as a transfer standard at low vacuum since their accuracies were found to be within 0.5 %.