• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.99-108
• /
• 1993

시멘트 페이스트의 비선형적 점탄성 거동을 연구하기 위해 동적인 전단 유동 시험 이 수행되었다. 전단응력과 전단변형 또는 전단변형율간의 관계를 보여주는 히스테리시스 곡선을 얻기 위하여 전단응력이 연속적으로 측정되었다. 이는 기존의 주파수 혹은 변형의 증가에 의한 실험(frequency or strain sweep experiment)과는 달리 저자에 의해 수정된 점 성계(HAAKE Model RV20/RC20/CV20N)의 조정프로그램을 이용하여 수행되었다. 동적 전 단유동시험에서 얻어진 히스테리시스곡선은 시멘트 페이스트가 전단변형을 받는 동안 선형 탄성, 입자간 연결고리의 파괴 및 점성유체 거동을 보여준다. 측정된 항복전단응력은 전단변 형율의 증가에 따라 파우어함수(Power low equation)에 의해 증가함을 보여준다.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.2
• /
• pp.5-17
• /
• 2018

In this study, the in-situ stress, strength and stress-strain characteristics with shear parameters (UU, CU, ${\bar{CU}}$) are analytically evaluated and the stability analyses are carried out under loading/unloading conditions. The in-situ stress and the stress-strain behaviour may become different according to input shear parameters in finite element analyses with construction step, Especially, if the internal friction angle in Mohr-Coulomb model is set to zero, the in-situ stress and the stress-strain behaviour might not be properly predicted. The results from CU parameter of total stress analysis have no significant difference with the results from CU of effective stress analysis. Therefore, in the numerical analysis for soft ground, CU parameters can be applied to predict in-situ stress and stress-strain behaviors. In addition, the calculation method was proposed to determine the shear parameter of Mohr-Coulomb model, which is corresponding to the shear strength equivalent to that of in-situ soil.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1C
• /
• pp.33-39
• /
• 2009

Vertical soil stress near a pile subjected to negative skin friction (NSF) may be reduced due to shear transfer at the pile-soil interface. A three-dimensional finite difference analysis has been performed to clarify the influence of vertical and horizontal stress reductions on the pile behavour. In addition, a simple equation has been proposed to estimate vertical stress reduction of the soil near the pile. The vertical and horizontal stresses are reduced by substantial amount compared to corresponding stress components at the Greenfield condition. The horizontal extent of vertical stress reduction of the soil near the pile is rather limited to about up to 4-8 D, where D is the pile diameter. The findings from the current research indicate that widely used $\beta$-method may result in over-estimation of dragload (compressive force on piles due to NSF) and hence stress reduction needs to be incorporated in the original equation.

• Tribology and Lubricants
• /
• v.14 no.1
• /
• pp.94-98
• /
• 1998

혈관내피세포는 혈관의 내벽에 단일 층을 구성하고 있는 상피세포로 동맥경화나 혈관협착의 원인에 매우 중요한 역할을 하는 것으로 알려져 있다. 그리고, 모든 혈관 질환의 발생장소가 혈관이 나뉘는 분지부에 집중되고 있어, 혈류역학과 혈관질환 간에 상호연관성이 있음을 짐작할 수 있다. 특히, 최근에 와서 혈관내피세포가 혈액유동에 의해 발생하는 전단응력을 인지하여 혈관의 제반 생리적 반응을 조절한다는 연구결과가 속속 발표되고 있어, 혈관질환의 극복을 위한 연구 개발에 혈관내피세포에 대한 이해의 중요성이 증대되고 있다. 이에 본 연구에서는 혈관내피세포에 혈류와 같은 크기의 전단응력을 부가하여 세포의 생리적 반응을 고찰할 수 있는 평판형 층류발생장치를 설계, 제작하였다. 설계된 평판형 층류발생장치는 유동환경 하에서의 혈관내피세포의 동적반응을 고찰 할 수 있도록 유동액의 온도, 산도, 전단응력의 크기를 조절할 수 있도록 설계하였으며, 제작된 실험장치를 이용하여 전단응력에 의한 혈관내피세포의 형태변화를 고찰하였다. 개발된 층류발생장치는 혈관내피세포의 연구 뿐 아니라, 백혈구의 점착, 암세포의 전이등에도 다양하게 활용이 가능하다.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.174-182
• /
• 1997

결정성 고분자수지는 가공조건에 의해 결정되는 미세구조의 변화에 따라 최종물성 이 현저히 달라지므로 최종 성형품의 물성을 극대화하기 위해서는 성형가공 중에 필연적으 로 부가되는 열이력 뿐만 아니라 전단이력이 결정화 거동에 미치는 영향을 규명하고 가공조 건의 최적화를 통하여 미세구조를 적절히 제어하는 것이 요구된다. 따라서 본 연구에서 in-situ 상태로 전단유도 결정화거동을 조사할수 있는 rheo-kinetic 실험 방법을 개발하고 결정화 거동에 미치는 열이력과 전단이력의 영향을 규명하고자 하였다. 이를 위해 비교적 결정화 속도가 빠른 폴리 부틸렌 테레프탈레이트 수지를 대상으로 냉각조건, 전단부가시간, 전단속도등을 다양하게 변화시키면서 plate-plate 레오미터로 시간에 따른 전단응력의 변화 를 조사하는 rheo-kinetic 연구를 수행하였다. 아울러 실험 중에 액체 질소로 급냉하여 얻은 시료를 대상으로 등온 및 비등온의 열분석 실험을 수행하고 JMA식과 Hoffman-Lauritzentlr 을 사용하여 분석한 다음, 그 결과를 rheo-kinetic 해석결과와 비교함으로써 결정화 거동에 미치는 전단응력의 영향을 규명하였다. 일정전단속동하에서 수행한 rheo-kinetic 실험결과, 시간에 따른 저난응력의 증가와 용융열이 증가하는 경향이 매우 유사한 거동을 보이므로 전 단응력의 증가는 결정화가 일어남에 기인한 결과임을 확인할수 있었으며 고분자수지가 전단 이력을 받게 되면 분자배향의 결과로 결정화 유도시간이 짧아지고 결정화속도가 증가할 뿐 만 아니라 보다 더 높은 온도에서 결정화가 일어나게 됨을 알수 있었다. 또 결정화 반가기 시간과 Hoffman-Lauritzen 식의 매개변수들이 전단속도, 전단부가시간, 결정화 온도 등의 이력에 무관하게 전단응력에 따라 선형적으로 변하고 있으므로 전단유도 결정화거동은 수지 에 부가되는 전단응력에 직접적인 영향을 받음을 알수 있었다. 이상과같은 전단유도 결정화 거동에 관한 결과를 가공공정상의 열전달 현상과 결합하여 해서하면 성형품 내부의모폴로지 의 예측이 가능하므로 성형품 물성의 극대화 방안의 수립에 이용될수 있을것으로 사료된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3C
• /
• pp.113-120
• /
• 2012

An actual slope failure was analyzed in residual soils at Jinju. Due to rainfall infiltration, the safety factor decreases in the unsaturated layers, since the effective stress and shear strength decrease. In this study, the effective stress is based on suction stress using soil water retention curve. Unsaturated properties were evaluated on soil water retention curve, hydraulic conductivity and shear strength with samples from the site. After infiltration analysis of unsaturated flow under the actual rainfall, the distribution of pore water pressure could be calculated in the slope layers. In the stress field of finite elements, an elastic analysis calculated total stress distribution in the layers and also shear stresses on the slip surface using elastic model. On the slip surface, suction stress and effective stress evaluated the shear strength. As a result, the factor of safety was calculated due to rainfall, which could simulate the actual slope failure. In particular, it was found that the suction stress increases and both the effective stress and the shear strength decrease simultaneously on the slip surface.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.1
• /
• pp.27-34
• /
• 2010

A finite element analysis has been conducted to clarify the behaviour of a single pile in heaving ground related to ground excavation. The numerical analysis has included soil slip at the pile-soil interface, analysing the interaction between the pile and the clay has been studied. The study includes the upward movement of the pile, the relative shear displacement between the pile and the soil and the shear stresses at the interface and the axial force on the pile. In particular, the shear stress transfer mechanism at the pile-soil interface related to a decrease in the vertical soil stress has been rigorously analysed. Due to the reductions in the vertical soil stress after excavation, the relative shear displacement and the shear stress along the pile have been changed. Upward shear stress developed at most part of the pile (Z/L=0.0-0.8), while downward shear stress is mobilized near the pile tip (Z/L=0.8-1.0) resulting in tensile force on the pile, where Z is the pile location and L is the pile length. Some insights into the pile behaviour in heaving ground analysed from the numerical analyses has been reported.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5A
• /
• pp.817-822
• /
• 2006

Post-tensioning the full-depth precast slab longitudinally is to eliminate the tensile stresses in the transverse joints and to prevent any leakage through the joints. When the prestressing is applied to full-depth precast slab which does not composite steel girder, stress concentration occurs at the corners of shear pocket, and compressive stress is not uniformly distributed in the section of precast slab. In this paper, full-depth precast slabs using four different shapes of shear pockets are analyzed by commercial finite element program. Round type of shear pockets is superior to reduction in stress concentration.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.5
• /
• pp.59-67
• /
• 2009

Three-dimensional (3D) numerical analyses have been conducted to study the behaviour of a single pile to tunnelling. The numerical analysis has included soil slip at the pile-soil interface. In the numerical analyses the interaction between the tunnel and the pile constructed in weathered soil and rock has been analysed. The study includes the pile settlement, the relative shear displacement between the pile and the soil and the shear stresses at the interface and the axial force on the pile. In particular, the shear stress transfer mechanism at the pile-soil interface related to the tunnel advancement has been rigorously analysed. Due to changes in the relative shear displacement at the pile-soil interface during the tunnel advancement, the shear stress and the axial force distributions along the pile have been changed. Upward shear stress developed at most part of the pile (Z/L=0.0-0.8), while downward shear stress is mobilised near the pile tip (Z/L=0.8-1.0) resulting in tensile force on the pile, where Z is the pile location and L is the pile length. Some insights into the pile behaviour to tunnelling obtained from the numerical analyses will be reported and discussed.

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.58-64
• /
• 1993

The degree of work hardening in the subsurface zones varied with the experimental conditions under the rolling contact fatigue wear test of high carbon Cr-Ti alloy steel was evaluated by the distribution of residual stresses. Surface residual stresses before the test did not affect the wear property. Surface residual stresses after the test decreased by the increase of contact stress and running. velocity. but the maximum compressive residual stress and its depth of saturation in the subsurface zone increased. The relationship between these experimental results and the distribution of the theoritical shear stress was also discussed.