• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.64.1-64.1
• /
• 2011

LCD 디스플레이 등에 사용되는 글래스 패널 위에 bare si die를 직접 실장하는 COG 플립칩 패키지의 경우 Au 범프와 ITO 패드 간의 전기적 접속 및 접합부 신뢰성 확보를 위해 접속소재로서 ACF (anisotropic conductive film)가 사용되고 있다. 그러나 ACF는 고가이고 접속피치 미세화에 따라 브릿지 형상에 의한 쇼트 등의 문제가 발행할 수 있어 NCP (non-conductive paste)의 상용화가 요구되고 있다. 본 연구에서는 NCP를 적용한 COG 패키지에 있어서 온도, 압력 등의 열압착 본딩 조건과 NCP 물성이 Au-ITO 접합부의 전기적 및 기계적 특성에 미치는 영향을 조사하였다. NCP는 에폭시 레진과 경화제, 촉매제를 사용하여 다양하게 포뮬레이션을 하였고 DSC (Differential Scanning Calorimeter), TGA (Thermogravimetric Analysis), DEA (Dielectric Analysis) 등의 열분석장비를 이용하여 NCP의 물성과 경화 거동을 확인하였다. 테스트 베드는 면적 $5.2{\times}7.2\;mm^2$, 두께 650 ${\mu}m$, 접속피치 200 ${\mu}m$의 Au범프가 형성된 플립칩 실리콘 다이와 접속패드가 ITO로 finish된 글래스 기판을 사용하였다. 글래스 기판과 실리콘 칩은 본딩 전 PVA Tepla사의 Microwave 플라즈마 장비로 Ar, $O_2$ 플라즈마 처리를 하였으며, Panasonic FCB-3 플립칩 본더를 사용하여 본딩하였다. 본딩 후 접합면의 보이드를 평가하고 die 전단강도로 접합강도를 측정하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.3
• /
• pp.153-163
• /
• 1986

GaAs, one of the III-V compounding semicondnctors, has been widely employed as base materials for the fabrication of the ultra-high-speed devices in the filelds of DBS, optical communications, MMIC'S and digital IC'S. There have been some reports on 4Kx4bit SRAM by D/E MESFET'S, 4K bit SRAM by HEMT'S, and receiver front ends for X-band by MMIC technologies, respectively. This paper reviews GaAs materials, wafer fabrication processes, device applications, and design aspects, and, finally, descusses the future of the ultra-high-spped-devices.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.13-19
• /
• 2004

In most PFI(Private Finance Initiative) projects in Korea, the project management are in charge of the Special Purpose Company(SPC) established for carrying out the project. This paper is a case study about an owner CM executed by the organizations and staffs of SPC itself. : Seoulbeltway (Ilsan $\~$ Toegaewon) Private Investment Project. In time management area, the SfC was the leader of project management throughout the life circle - plan, design, permit, construction, operation and maintenance - beyond the schedule manager's role. In cost management area, the methods of reducing the total costs by VE, new technologies, etc. has been needed assuming the construction risks were subject to SPC.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.97-103
• /
• 2002

In this paper, a Logarithmic Video Amplifier(LVA) for radar system or satellite communications is described. The proposed LVA is composed of a input stage, amplification stage, and output stage. As well as a novel series-parallel architecture is proposed for the purpose of wide dynamic range and high speed operation, a newly developed input stage is designed in order to control the voltage level between LVA and detector diode. The LVA is fabricated with a 1.5um 2-poly 2-metal n-well Bi-CMOS technology, and the chip area is 1310 um x 1540 um. From the experimental results, it consumes 190 mW at 10V power supply, the chip has 60 dB dynamic range and 100ns falling time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.679-682
• /
• 2001

An experiment is carried out to investigate the influences of shearing characteristic factors for the process design of lead frame blanking in copper alloy C194(t=0.205mm). 3 process parameters, e.g., clearance between die and punch, strip holding pressure, and bridge allowance are selected for this study. From the basis condition 6% clearance, 20N/$mm^2$, and 1.5t bridge allowance the seven times of experiment are done by varying the each factor. The square shape specimen is used to study the characteristics of shearing factors. The ratios of roll over, burnish, fracture zone are measured after blanking. The experimental analysis shows that the burnish ratio is decreased as the clearance increases. And the larger strip holding pressure is shown that the roll over and burnish ratio are both decreased. It is found that an optimal strip holding pressure is need for large burnish zone. Finally it is shown that the bridge allowance is less affected than clearance and strip holding pressure.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1157-1162
• /
• 2003

Behavior of aluminum alloy embedding a particle was investigated at room temperature under ECAP. Finite element analysis by using ABAQUS shows that ECAP is a useful tool for eliminating residual porosity in the specimen, and much more effective under friction condition. The simulation, however, shows considerably low density distributions for matrix near a particle at which rich defects may occur during severe deformation. Finite element results of effective strains and deformed shapes for matrix with a particle were compared with theoretical calculations under simple shear stress. Also, based on the distribution of the maximum principal stress in the specimen, Weibull fracture probability was obtained for particle sizes and particle-coating layer materials. The probability was useful to predict the trend of more susceptible failure of a brittle coating layer than a particle without an interphase in metal matrix composites.

• Composites Research
• /
• v.24 no.3
• /
• pp.6-11
• /
• 2011

This paper presents an estimating method for local property changes and failure prediction of composite materials experiencing large shear deformation during draping process. The bone plate for the metaphyseal femur fracture was chosen to apply the presented method because it has complex geometry. The local property changes due to macro-/microscopic deformations of fabric composites during draping process were evaluated by various tests and the result was applied to predict static/fatigue behaviors of the bone plate. This paper was expected to present useful information on the design of composite structures with complex geometry and their performance evaluation.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.507-519
• /
• 1999

An approach using the energy method has veen proposed for the analysis of cone spinning having the complicated deformation modes mixed by shear and normal deformation. In the proposed method, the corresponding solution is found through optimization of the total energy dissipation with respect to the parameters assumed by the velocity field defined as the variation of the length in longitudinal direction. The sheet blank is divided into three layers to consider the bending effect and the energy dissipated by shear deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation of axi-symmetric sheet element for the evaluation of total deformation energy. In order to check the validity of the proposed method, the complex spinning for making the conical cup is analyzed and the computed results are compared with the experimental results. In comparison of the computed results with existing experimental results,, the good agreement is obtained for the variation of outer radius and the distribution of thickness, and it has thus been shown that the present approach is applicable to the analysis of complex spinning.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.545-550
• /
• 2000

3Y-TZP, 12Ce-TZP 및 3Y-TZP, 12Ce-TZP 현탁액의 제타포텐셜과 겉보기점도의 측정으로부터 슬립주입공정에 의한 다층복합체의 제조조건을 조사하였다. 아울러 다층복합체의 소결밀도, 미세구조, 결정상에 미치는 열처리의 영향을 검토하였다. 3Y-TZP와 12Ce-TZP 현탁액의 등전점을 pH 8부근이었으나 3Y-TZP/12Ce-TZP의 등전점은 pH8.6이었다. 현탁액은 전단속도의 증가와 더불어 점도가 감소하는 의가소성유동을 나타내었다. 15 및 20vol% 고체함량을 갖는 3Y-TZP와 3Y-TZP/12Ce-TZP 현탁액은 소량(0.3wt%)의 유기해교제의 첨가만으로 슬립주입에 적당한 유동성을 보유하였으나, 12Ce-TZP의 경우는 점도를 감소시키기 위하여 부가적인 전해질이 필요하였다. 이론밀도의 98% 이상을 보유하고 0.3~$2.2\mu\textrm{m}$의 입경을 갖는 치밀한 다층복합체가$ 1500^{\circ}C$ 소결로 얻어졌다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.1990-1995
• /
• 2012

This paper presents design methodology to determine the design parameters that affect the manufacture of aluminum forging piston using the FE simulation and the Taguchi method. Maximum forging load is used as the objective function, and preform, material temperature and draft angle are selected as the design parameters. Their combinations are implemented by orthogonal array, and forging load is evaluated through the simulation. From the analytic results of design parameters to minimize the load using signal to noise ratio, their optimal combinations are proposed. The proposed design methodology will be able to help in selecting proper preform among preforms and to be used in determining the optimal combination of the parameters in metal forming process.