• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.259-259
• /
• 2012

Mo-Cu 합금은 열전도도, 전기전도도가 우수하고 합금조성에 따라 열팽창계수의 조절이 가능하여 반도체소재, 방열소재, 접점소재 등에 적용가능성이 높은 재료로 주목받고 있다. 또한 상태도 상에서 고용도가 전혀 없기 때문에 박막을 제작하였을 경우, 나노 복합체 형성이 용이하고 질소 분위기에서는 MoN-Cu로 상분리가 가능하여 하드상과 소프트상의 물성을 동시에 보유한 박막 제작이 가능하다. 또한 고온에서 산화반응에 의해 생기는 $MoO_3$, $CuO_3$와 같은 준안정상의 산화물들은 육방정계 구조(HCP)를 가지며 전단특성이 우수하여 자동차 저마찰 코팅재료로써 많은 연구가 진행되고 있다. 반면, Mo-Cu 는 상호간에 고상은 물론 액상에서도 고용도가 전혀 없기 때문에 일반적인 방법으로는 합금화 또는 복합화가 어렵다. 또한 Mo-Cu 박막을 제작할 경우 복수의 타겟을 이용해야 하기 때문에 성분조절과 구조적 제어가 불리하고 공정의 복잡화라는 단점을 가지고 있으며 추가적으로 다른 원소를 첨가하여 3원계, 4원계 이상의 박막을 형성하는 것에 한계가 있다. 따라서 본 연구에서는 위와 같은 문제점을 해결하기 위하여 상호간의 고용도가 없는 재료의 합금화가 용이한 기계적 합금화법(Mechanical Alloying)을 이용하여 Mo-Cu 합금분말을 제조하였고, 준안정상태의 구조의 유지가 가능한 방전 플라즈마 소결법(Spark Plasma Sintering)을 이용하여 합금타겟을 제작하였다. Mo-Cu 박막은 제작된 합금타겟을 사용하여 DC 스퍼터링 공정으로 제작하였다. Mo-Cu 박막의 공정조건으로는 타겟조성, 공정분위기, 가스 비율로 정하여 실험을 진행하였다. 제작된 박막은 자동차 코팅재료로써의 적용가능성을 보기 위해서 내열성, 내식성, 내마모성의 특성을 평가하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.113-113
• /
• 2012

플라즈마 내에서 발생하는 입자는 플라즈마 내 전기적 및 화학적 특성으로 인해 응집이 적고 균일한 특성을 가진다. 이에 따라 도포성이 좋으며 낮은 응력을 가지는 박막의 형성이 가능하다. 이러한 특성을 가지는 나노입자는 메모리, 고효율 박막형 태양전지 등에 이용될 수 있다. 특히, PECVD (Plasma enhanced chemical vapor deposition) 공정 중 플라즈마가 켜져있는 동안 수소 가스를 펄스형태로 추가 주입하는 방법은 실리콘 이온 사이의 결합을 통한 표면 성장을 일부 방해하여 이를 통해 최종적으로 생성되는 실리콘 입자의 크기제어를 가능하게 한다. 이러한 과정으로 PECVD내에서 생성된 입자의 입경 분포는 기존의 경우 공정 중 포집을 한 후 전자현미경을 이용하였지만 실시간 측정이 불가능한 한계가 있었고, 레이저를 이용한 실시간 측정은 그 측정범위의 한계로 인해 적용에 어려움이 있었다. 이에 따라 본 연구에서는 저압에서 실시간으로 나노입자 크기분포 측정이 가능한 PBMS (particle beam mass spectrometer)를 이용하여 PECVD 내에서 수소가스 펄스를 이용하여 발생되는 실리콘 입자를 공정 변수별로 측정하여 각 변수에 따른 입자 생성 경향을 분석하였다. 실리콘 나노 입자의 측정은 PBMS 장비의 전단 부분을 PECVD 장치 내부에 연결하여 진행하였다. 수소 가스 펄스를 이용한 실리콘 입자 생성의 주요 변수는 RF pulse, $H_2$ pulse, 가스 유량 (Ar, $SiH_4$, $H_2$), Plasma power, 공정 압력 등이 있다. 이와 같이 주어진 변수들의 제어를 통해 생성된 나노입자의 입경분포를 PBMS에서 실시간으로 측정하고, 동일한 조건에서 포집한 입자를 TEM 분석 결과와 비교하였다. 측정 결과 각각의 변수에 대하여 생성되는 입자의 크기분포 경향을 얻을 수 있었으며, 이는 추후 생성 입자의 응용 분야에 적합한 크기 분포 특성을 가지는 실리콘 입자를 제조하기 위한 조건을 정립하는데 중요한 역할을 할 것을 기대할 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.450-455
• /
• 2017

A shield connector is an automotive electrical component that is used to connect electrical wiring in a vehicle. This part is made by progressive pressing using a phosphor bronze material with high electrical conductivity. The shape of the product is not complicated, but plastic forming techniques are required, such as deep drawing and bending, as well as shearing techniques such as piercing and notching. The finite element method was used to model the process. The strip layout design stage of the progressive die makes it possible to examine the thickness change, the stability of the forming process, and the spring-back. As a result of this analysis, it is possible to predict the correction values for the tendency of cracks, wrinkles, and incomplete plastic deformation, and to identify possible problems in advance. As a countermeasure against the forming error caused by the drawing process analysis, the drawing shape was modified and applied in the process design. For effective material utilization, a 3D strip layout was designed using an optimized blank shape based on nesting. The results improve the crack stability and spring-back of shield connector products produced through progressive pressing.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.182-187
• /
• 2006

The purpose of this study was to investigate effect of coagulation on filtration performance of membrane in submerged MBR system and influence of continuous aeration to reduce fouling of membrane surface on coagulated floc. For this purpose, aeration tank sludge of MBR system was compared with jar-test sludge. The experimental results were analysed in terms of floc size and SRF (Specific resistance of Filtration). The more alum was added, the more content of floc below $10{\mu}m$ reduced and SRF decreased. But compared with jar-test results, it was found that effect of coagulation on MBR floc was reduced. Operation time of membrane in alum added MBR was longer than that in control MBR. But operation time was not proportional to alum dose. It was thought that the result was reason that floc below $10{\mu}m$ was not reduced sufficiently by shear force of continuous aeration. Moreover it was founded that if alum is added more than proper dose, it brings filtration resistance to increase.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.55-62
• /
• 2023

In this study, Sn-3.0Ag-0.5Cu (wt.%, SAC305) solder dipping process was performed between Ni-foam skeleton with different pore per inch (PPI) to fabricate Ni-foam/SAC305 composite solder, and then applied to the transient liquid phase (TLP) bonding process to evaluate the microstructure and mechanical properties of the bonded joint. The Ni-foam/SAC305 composite solder preform consisted of Ni-foam and SAC305, and an intermetallic compound (IMC) having a (Ni,Cu)₃Sn₄ composition was formed at the Ni-foam interface. During TLP bonding process, the IMC at the Ni-foam interface was converted to (Ni,Cu)₃Sn₄+Au, and as the bonding time increased, the Ni-foam and SAC305 continuously reacted, and the bonded joint was converted into an IMC. And it was confirmed that the 130 PPI Ni-foam/SAC305 composite solder joint was converted into an IMC at the fastest rate. As a result of performing a shear test to confirm the effect of Ni-foam on mechanical properties, solder joints under all conditions exhibited excellent mechanical properties of 50 MPa or more in the early stages of the TLP bonding process, and the shear strength tends to increase as the bonding time increases.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.6
• /
• pp.64-71
• /
• 2015

Spinning process is generally used for manufacturing axisymmetrical, thin-walled thickness and hollow circular cross-section parts. Traditional spinning technology is classified to conventional spinning and power spinning(shear spinning and flow forming). Literature surveys of spinning application for regenerative cooling chamber and divergent nozzle of liquid propellent rocket thrust chamber have been conducted. Most spinning technology has been used mandel for manufacturing chamber and nozzle. Recently, hot spinning has been used much compared to traditional cold spinning.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.347-352
• /
• 1996

The enzyme deactivation in a membrane recycling system for the simultaneous saccharification and fermentation(SSF) was studied under various temperature and pressure. The optimum molecular weight cut off(MWCO) of the ultrafiltration membrane for recycling cellulase and ${\beta}$-glucosidase was 50,000. When the cellulase was recycled continuously through the membrane system, it was not deactivated. But the activity of ${\beta}$-glucosidase was decreased with an increase in operating temperature and transmembrane pressure. After 720 minutes at $42^{\circ}C$ and 24.8 psig , the activity of ${\beta}$-glucosidase was reduced by 35% of the initial activity. Such tendencies could be well explained by the results of highly induced shear at the fiber surface of membrane when temperature and transmembrane pressure became higher.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1481-1486
• /
• 2007

Frictional laws are criticized with emphasis on their application to bulk metal forming simulation in this paper. Coulomb frictional law and constant shear frictional law are investigated in detail in terms of their effect on metal forming process. A friction sensitive bulk metal forming process, a long-pipe simultaneously shrinking and expanding process, is introduced and the problems of the constant shear frictional law are revealed comparing the predictions obtained by the Coulomb frictional law and the constant shear frictional law with the experiments. It is shown that the constant shear frictional law is improper in the case that the normal stress varies very much from position to position and that the normal stress is low compared with flow stress of the adjacent material. It is also shown that the Coulomb frictional constant is more or less affected by the normal stress.

• Membrane Journal
• /
• v.13 no.4
• /
• pp.219-228
• /
• 2003

This study was carried to investigate the effect of humic acid and kaloin which cause the turbidity and organic substance component for optimization of drinking water treatment process using the membrane separation. Also we were ovserved the optimum operating condition which flux was stabilized, while specific resistance value in membrane was minimized. As the result, the membrane separation was operated at low specific resistance value with the increase of the pressure. And then, cake load decreased by high velocity with the increase of the linear velocity, and the tendency in which specific resistance value and flux increased. Therefore, we confirmed the optimum operating condition as pressure $2.0 kgf/cm^2,$ 0.92 m/sec linear velocity.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.59-68
• /
• 1997

The main purpose of this study was to determine effects of BS-SBR compared with SBR on the removal of soluble organics and sludge separation. In the BS-SBR process, soluble organics were removed by suspended activated sludge as well as biological fixed films and these two processes occurred simultaneously in one tank. The removal efficiency of soluble COD in the BS-SBR, approximately 97% in both 1 and 3-cycle/d was higher than for SBR. The BS-SBR process was very efficient for SS removal. The averaged SS concentration were 4.8 mg/l over the operation period, the daily SS values were consistently below 10 mg/l in both of 1-cycle and 3-cycle a day. The sludge settling characteristics in BS-SBR were totally different from SBR's. The sludge, dark brown, was well flocculated and its floc size was visible larger than the SBR's.