• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.457-463
• /
• 2012

Current refrigerators are designed to have thin doors and walls to facilitate user convenience and increase inner storage space. However, the thin doors and walls gives rise to the problem of dew generation on the outer surface of a refrigerator due to a large critical temperature difference between the outer wall and the room air; So far, an electric heater is commonly used for making the dew to evaporate; in this case, the heater inevitably requires additional electrical power. We propose a new approach to reduce the dew generation in a refrigerator by redesigning the gasket and varying the thickness of the inner case of the refrigerator. The results of simulations performed in this study indicate that the surface temperature in the region where dew was generated was increased by approximately $0.39{\sim}3.07^{\circ}C$ without the use of a heater.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1071-1086
• /
• 2016

The safety of aircraft can be threatened by environmental factors, such as icing, turbulence, and lightning strike. Due to its adverse effects on aircraft structure and electronic components of aircraft, lightning strike is one of the biggest hazards on aircraft safety. Lightning strike can inject high voltage electric current to the aircraft, which may generate strong magnetic field and extreme hot spots, leading to severe damage of structure or other equipment in aircraft. In this work, mechanism of lightning strike and associated direct and indirect effects of lightning on aircraft were studied. First, on the basis of aircraft lightning regulations provided by Aerospace Recommended Practice (ARP), we considered different lightning waveform and zones of an aircraft. A coupled thermal-electrical computational model of ABAQUS was then used for simulating flow of heat and electric current caused by a lightning strike. A study on fuel tank, with and without lightning protection system, was also conducted using the computational model. Finally, electric current flow on two full scale airframes was analyzed using the EMA3D code.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.677-685
• /
• 2014

A direct carbon fuel cell (DCFC) generates electricity directly by converting the chemical energy in coal. In particular, a DCFC system with a solid oxide electrolyte and molten carbonate anode media has been proposed by SRI. In this system, however, there are conflicting effects of temperature, which enhances the ion conductivity of the solid electrolyte and reactivity at the electrodes while causing a stability problem for the anode media. In this study, the effect of temperature on the stability of a carbon-carbonate mixture was investigated experimentally. TGA analysis was conducted under either nitrogen or carbon dioxide ambient for $Li_2CO_3$, $K_2CO_3$, and their mixtures with carbon black. The composition of the exit gas was also monitored during temperature elevation. A simplified reaction model was suggested by considering the decomposition of carbonates and the catalyzed Boudouard reactions. The suggested model could well explain both the measured weight loss of the mixture and the gas formation from it.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.397-402
• /
• 2016

To produce adequate electricity in nuclear and thermal power plants, an optimal amount of steam should be supplied to a generator connected to high- and low-pressure steam turbines. A turbine output control device, which is a special steam valve employed to supply or interrupt the steam to the turbine, is operated using a hydraulic servo actuator. In power plants, the performance of servo actuators is degraded by the air generated from the hydraulic system, or causes frequent failures owing to an increase in the wear of the seal. This is due to the seal being burnt as generated heat using the produced compressed air. Some power plants have exhausted air using a fixed orifice, and thus they encounter power loss due to mass flow exhaust. Failures are generated in hydraulic pumps, electric motors, and valves, which are frequently operated. In this study, we perform modeling and analysis of the load-sensing air-exhaust valves, which can be passed through very fine flow under normal use conditions, and exhaust mass flow air at the beginning stage as with existing fixed orifices. Then, we propose a method to prevent failures due to the compressed air, and to ensure the control accuracy of hydraulic servo actuators.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.213-219
• /
• 2006

The Yongjang mine is located in Masan City, Gyeongsangnamdo, which consists of a black shale possessing quartzite veins with othercompositions such as gold, silver, and sublimated sulfur. The average width of the veins is $9{\sim}17cm$ and the average degrees of the gold and silver are 3.6 g/t and 113.6 g/t respectively. A regional and a detailed scale electrical resistivity surveys are conducted to determine the existence of the mineralization zones and the linear structures in the study area. In addition, surveys of a several different array methods are conducted such as dipole-dipole array in the surface and borehole-to-surface array, surface-to-borehole array, and dipole-dipole array in the borehole. The method of element division can be applied to the region in which the borehole is curved, inclined or the distance between the electrodes is shorter than that of nodal points, because the coordinate of each electrode cannot be assigned directly to the nodal point if several electrodes are in an element. Yongjang vein is extended longer under the subsurface than on the surface in the images reconstructed from the 3D inversion. Therefore, it is recognized that the 3-D interpretation of the electrical resistivity survey is a very useful method to figure out the existence of strike and extension direction because the mineralization zones and the linear structures are shown in each depth.

• Journal of the Korean Electrochemical Society
• /
• v.20 no.1
• /
• pp.7-12
• /
• 2017

Using a precursor of $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ as a starting material, a surface-modified cathode material was obtained by coating with KCl, where the added KCl reduces residual Li compounds such as $Li_2CO_3$ and LiOH, on the surface. The resulting electrochemical properties were investigated. The amounts of $Li_2CO_3$ and LiOH decreased from 8,464 ppm to 1,639 ppm and from 8,088 ppm to 6,287 ppm, respectively, with 1 wt% KCl added $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ that had been calcined at $800^{\circ}C$. X-ray diffraction results revealed that 1 wt% of KCl added $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ did not affect the parent structure but enhanced the development of hexagonal crystallites. Additionally, the charge transfer resistance ($R_{ct}$) decreased dramatically from $225{\Omega}$ to $99{\Omega}$, and the discharge capacity increased to 182.73mAh/g. Using atomic force microscopy, we observed that the surface area decreased by half because of the exothermic heat released by the Li residues. The reduced surface area protects the cathode material from reacting with the electrolyte and hinders the development of a solid electrolyte interphase (SEI) film on the surface of the oxide particles. Finally, we found that the introduction of KCl into $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ is a very effective method of enhancing the electrochemical properties of this active material by reducing the residual Li. To the best of our knowledge, this report is the first to demonstrate this phenomenon.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.1-15
• /
• 2015

Based on the analysis and interpretation of the headwords and poetic words of a group of eleven collecting sceneries of Jeonju, the origin and transformations of the Jeonju-Palkyung(Eight sceneries of Jeonju) investigated by a time-series analysis are as follows. As there is no collection of landscape with a formal structure similar to that of the current Jeonju-Palkyung, prior to the Palkyung by Chujae(秋齋) Cho Soo-Sam(趙秀三, 1762~1849), there is no significant problem in assuming the eight poems in Chujaejib(秋齋集) are the origins of the Jeonju-Palkyung, and it is estimated to have been produced in 1829. In the late-19th century poem 'Wansanseunggyeong(完山勝景)', 'the Palkyung in Yeollyeo Chunhyang Sujeolga', and 'the Palkyung delivered by poet Shin Seokjeong in the Japanese colonial era', only the 'Dongpogwibeom(東浦歸帆)' changed from Dongjipo to Dongchon of Bongdong as for 'Landscape Setting There($L_{ST}$)' according to changes in district administration; despite this change, the fact that they are not too different from the Palkyung of Cho Soo-Sam, also supports this. Moreover, according to the headword concordance analysis, it is proven that the Jeonju-Palkyung was established in the late-19th century and continued to be the region's representative sceneries even during the Japanese colonial era, and later 'Namcheonpyomo(南川漂母)' and 'Gonjimangwol(坤止望月)' were added to expand to the Jeonju-Sipkyung(ten sceneries of Jeonju). But when we see there are famous spots that are the origins of the Jeonju-Sipkyung, including Gyeonggijeon, Geonjisan, Jogyeongdan, Omokdae, and Girinbong, Deokjinyeon, and Mangyeongdae, all of which have great representational significance as the capital of Jeolla Provincial Office as well as of the place of origin for Joseon Dynasty in the grouping of sceneries during the early Joseon Dynasty, including "Paehyangsipyeong (沛鄕十詠)", "Gyeondosipyeong (甄都十詠)", and "Binilheonsipyeong(賓日軒十詠)", the beginnings of the semantic Jeonju-Palkyung should be considered up to the first half of Joseon Dynasty. During this period, not only the fine sceneries with high retrospective merit as the capital of Hubaekje, like Gyeonhwondo(甄萱都), but also the sceneries like Mangyeongdae that reminds people of Jeong Mongju(鄭夢周) and Yi Seonggye(李成桂) in the late period of Goryeo appeared, elevating the status of Jeonju as the capital of Hubaekje and shortening the historical gaps as the place of origin of the Joseon Dynasty. The Jeonju-Palkyung is an organic item that carries the history of the Joseon Dynasty after Hubaekje and has gone through many cycles of disappearing and reappearing, but it has continued to change and transform as the region's representative sceneries. The Jeonju-Palkyung is a cultural genealogy that helps one understand the 'Jeonju Hanpunggyeong(韓風景: the sceneries of Korea in Jeonju)', and the efforts to preserve and pass it down to the next generation would be the responsibility of the people of Jeonju.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.1-15
• /
• 1998

Adult wound healing is accompanied with inflammation and eventual scar formation, whereas fetal wounds heal rapidly by mesenchymal proliferation without significant inflammatory cell participation and with minimal or no scar formation. The cellular mechanisms underlying these differing forms of wound healing are unknown but the extracellualr matrix through its effects on cell function, may play a key role. Therefore the purpose of this study is to investigate the spatial and temporal deposition of several component of extracellular matrix, which are known to be involved with scar formation, in the artificially created cleft lip wound healing of fetuses. The author had undergone hysterotomy and created cleft lip-like defects on fetuses of New Zealand White Rabbit in mid-third trimester(24 days). Fetuses were divided into the repaired group, the unrepaired group and the sham-operated control group. At 1, 2, 3, 5, 7 days after procedure, fetuses were obtained by Caeserem section. After documenting the viability of fetuses, they were photographed to compare size and facial morphology and sectioned for histological examination by H & E stain and spatial and temporal deposition of collagen typeI, III, IV, V and fibronectit laminin by immunohistochemical method. The findings are summarized as follows 1. There were lack of inflammation in the repaired and the unrepaired group during experimental periods. 2. The reepithelialization of the unrepaired group was slower than that of the repaired group. 3. Collagen I, III, V were found from post-op. third day. There were no difference of distribution in the control, the repaired and the unrepaired group. Collagen types I, III, V were present in all groups with restoration of the normal collagen pattern in the fetus. This implies that lack of scarring in fetal wounds is due to the difference of collagen organization pattern within wound and not simply lack of collagen formation. 4. Collagen IV was slightly increased at post-op. third day and decreased after post-op. fifth day. Eventually there were no differences in the control, the repaired and the unrepaired group. Lminin was found at post-op. fifth day and maintained staining density until post-op. seventh day. There were no differences in the control, the repaired and the unrepaired group. According to staining of laminin and collagen type IV in epithelial basement membrane, formation of epithelial basement membrane was not completed until reepithelialization was finished. 5. According to staining of laminin and collagen type IV, there were no increase of neovascularity in the repaired and the unrepaired group. 6. Fibronectin was increased until post-op. third day at fibrin clot, wound base and margin and decreased after post-op. fifth day. Eventually, there were no differences in the control, the repaired and the unrepaired group. So it implies fibronectin plays a role as provisional matrix for fetal wound healing.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.696-701
• /
• 2012

Non-aqueous processes have been developed for stable management and reuse of spent fuels. Nowadays, a plan for the management of spent fuel is being sought focusing on a non-aqueous process in Korea. Named as pyroprocessing, it includes an electrolytic reduction process using molten salt at high temperature for the spent fuels, which provides metallic product for a following electro-refining process. The electrolytic reduction process utilizes electrochemical reaction producing Li to convert oxides into metals in high temperature LiCl medium. Various kinds of elements in the spent fuels would be distributed in the system according to their respective reactivity with the reductant, Li, and the medium, LiCl. This study elucidates the reactions of the elements to understand the behavior of composite elements on the spent fuels by thermodynamic calculations. Uranium and transuranic are reduced into their metallic forms while rare-earth oxides, except for Eu, are stable against the reaction at a process temperature. This study also covers the tendency of reactions with respect to the temperature and, finally, estimates radioactivity and heat load on the distributed phases based on the reference spent fuel characteristics.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.127-133
• /
• 2013

As an essential part of current industrial society, electric power energy is contantaly increasing in pace with the development of science and technology. In order to meet the demand of electric power, power facilities which take care of the higher voltage and bigger capacity is required. To produce and supply electric power on a sound basis the electric facilities should operate with reliability. To prevent disasters in advance, the high quality facilities should be manufactured, and a constant management should be done. When the power facilities cause accidents, the result is huge national deficits. Since the power facilities play a pivotal role in the key industry of national infrastructures of they should operate for a long time in maintaining a stable state, and the accidents can be prevented in advance. The lifetime of a power cable is considered to be 30 years at the time of manufacture, but in real fields, accidents of cable occur 8-12 years from the start of operation, resulting in a heavy loss of properties. In this paper, we will show that we have found out the cause and process of the deterioration of 22kV cable systems in operation. The result is that the process of deterioration does not follow the Weibull distribution only ; but rather, after the heat deterioration the Weibull distributed deterioration comes, then the cable is destroyed due to the partial discharge resulting from the Weibull distributed deterioration.