• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.543-548
• /
• 1994

전기화학반응은 일반적으로 반응속도가 전류에, 반응의 구동력이 과전압에 대응하기 때문에 전류 또는 전위의 경시적 변화로 부터 적극 반응기구나 반응의 과정을 해석하는 법이 널리 이용되고 있다. cyclic voltammetry과 chrono-potentiometry을 비롯한 시간영역에서의 해석에 대해, 전극계의 동적인 특성을 주파수 영역에서 해석하는 것도 가능하며 교류임피던스법이 가장 잘 알려진 방법이다. 여기서는 교류임피던스법의 고찰법, 기본적인 측정법, 몇개의 계에 있어서 임피던스 특성 및 그 방법의 새로운 전개에 대해서 설명한다.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.533-539
• /
• 2013

The electrochemical corrosion and passivation of Ni rotating disk electrod in borate buffer solution was studied with potentiodynamic and electrochemical impedance spectroscopy. The mechanisms of both the active dissolution and passivation of nickel and the hydrogen evolution in reduction reaction were hypothetically established while utilizing the Tafel slope, impedance data, the rotation speed of Ni-RDE and the pH dependence of corrosion potential and current. Based on the EIS data, an equivalent circuit was suggested. In addition, carefully measured were the electrochemical parameters for specific anodic dissolution regions. It can be concluded from the data collected that the $Ni(OH)_2$ oxide film, which is primarily formed by passivation, is converted to NiO by dehydration under the influence of an electrical field.

• Journal of the Korean Chemical Society
• /
• v.39 no.9
• /
• pp.722-727
• /
• 1995

The electrochemical impedance spectra of polyaniline film prepared by cyclic voltammetry have been investigated in 0.1 M aqueous sulfuric acid solution. Charge transfer resistances were rather low at the oxidized states in agreement with the conductive behavior reported at these potentials. The corresponding exchange current densities were very high. Large values of capacitance associated with the polymer have been found which vary as a function of the electrode potentials. An equivalent electrical circuit has been deduced from the impedance data. It was therefore possible to obtain the parameters of the ionic mass transport within the film.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.37-43
• /
• 1996

The electrochemical impedance spectra of polyaniline film coated on tungsten electrodes by cyclic voltammetry have been measured in 0.1 M aqueous sulfuric acid solution. An electrochemical cell composed of large redox capacitance and low resistance of PANI-film in series was in agreement with the conductive behavior reported at these potentials. When the PANI was coated on bare tungsten, the electrolytic resistance was only observed. However, on the oxidized tungsten instead of bare tungsten, the resistance of tungsten oxide and the contact resistance between PANI and tungsten oxide were additionally observed. Equivalent electrical circuits have been deduced from the impedance data. It was therfore possible to obtain the parameters of the ionic mass transport within the film.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.229-231
• /
• 2007

본 연구에서는 연료전지나 배터리 및 슈퍼커패시터 등의 전기화학적 전력기기의 임피던스 모델링이 가능한 저가의 임피던스 분광시스템의 개발에 관해 제안한다. 제안된 시스템은 상용 DAQ Board (Data Acquisition Board)와 강력한 HMI(Human-Machine Interface)를 지원하는 Labview 소프트웨어를 이용하여 구성되었고 고가의 EIS (Electrochemical Impedance Spectroscopy) 장비를 대체하여 널리 사용될 수 있을 것으로 기대된다. 또한, 시스템의 응답을 Lock-in Amplifier를 이용하여 측정함으로써 노이즈가 많은 환경에서도 정확한 측정이 가능하게 하였다. 제안된 시스템을 이용하여 Ballard Nexa 1.2kW PEM 연료전지 스택의 임피던스를 측정하였고, 이를 바탕으로 한 등가 임피던스 모델도 제안된다.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.226-227
• /
• 2010

슈퍼커패시터의 성능을 시험하기 위해 필요한 기존의 실험방법들에는 충방전을 통한 커패시턴스의 측정, AC 임피던스 법에 의한 등가직렬저항(ESR)의 측정 및 자연방전의 측정 등이 포함되는데, 이러한 방법들은 번거롭고 많은 시간을 소요하므로 대량 생산되는 슈퍼커패시터의 모든 셀의 특성을 파악하는데 사용하기는 곤란하다. 따라서 본 논문에서는 전기화학적 임피던스 분광법에 의해 슈퍼커패시터의 등가 임피던스 모델의 파라미터를 추출하고 이를 이용하여 슈퍼커패시터의 제반 특성들을 간접적으로 파악함으로써, 번거로운 여러 가지 실험 없이 전기화학적 임피던스 분광법만으로 슈퍼커패시터의 성능을 판별할 수 있는 새로운 방식을 제안한다.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.713-719
• /
• 1991

Electrochemical impedance measurement system using Fourier transform was constructed in the range of the frequencies up to 100 kHz. This system consists of pseudo-random noise generator, specially designed potentiostat, fast data acquisition system, system controller, and computer interface. The performance of the constructed system was found to be almost same as the commercially available system using lock-in amplifier. Measuring time was significantly reduced because the minimum time for the measurement depended on one cycle of the lowest frequency used. It would be possible to study time-varying electrochemical impedance systems such as the initial stages of corrosion processes using this system.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.1
• /
• pp.26-33
• /
• 2001

This article involves the application of the fractal geometry to interfacial electrochemistry. Especially, we gave our attention to impedance behaviour of the fractal electrode. First, this article briefly explained the constant phase element (CPE) in electrochemical impedance and the do Levie's transmission line model. Second, we introduced the Nyikos and Pajkossy's theoretical works to approach the CPE phenomena using the fractal geometry. Finally this article presented other various fractal models for analysing the ac response of the rough electrodes.

• 한국전기화학회:학술대회논문집
• /
• 2003.04a
• /
• pp.36-37
• /
• 2003

• Journal of the Korean Electrochemical Society
• /
• v.12 no.4
• /
• pp.301-310
• /
• 2009

This paper describes one of the hot issues in solar cell studies, dye-sensitized solar cell. DSSC is a kind of photoelectrochemical cells. Therefore, it is quite different from the conventional solar cells which originate from pn semiconductor theory, although its mechanism can be explained with the theory. This paper describes the difference between the conventional semiconductor approaches and a newly adapted one for DSSC. Especially, electrochemical analysis methods such as electrochemical impedance analysis and cyclic voltammogram are briefly introduced, which are commonly used for DSSC analysis.