• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.804-806
• /
• 2000

동일한 임계전류 특성을 갖는 Bi-2223 테이프에 전력기기의 실제 응용에서 발생되는 큰 사고전류를 고려한 임계전류보다 큰 과임계전류를 흘렸을 때 테이프의 온도상승 및 저항 특성을 중요한 인자에 대해 조사하였다. 냉각이 좋은 즉 비절연 테이프의 경우 온도상승은 없고, 표피효과에 의한 저항의 증가도 없고, 특히 비절연 테이프의 경우 과도 및 정상 상태 저항이 동일한 반면 절연 테이프의 경우 매우 상이하고, 전기절연 길이를 전압탭보다 길게만 해주면 길이에 무관하게 온도상승 및 저항이 동일하였으며 마지막으로 모재의 저항율이 상이하여도 임계전류만 동일하면 온도상승 및 저항은 유사함을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1110-1111
• /
• 2015

초전도 코일의 안정성(stability)을 향상시키기 방법으로 초전도 자석의 턴(turn) 사이의 절연을 없애는 무절연 코일(no-insulation coil) 및 금속 테이프를 같이 권선하는 금속절연 코일(metal insulation coil)이 제안되어 활발히 연구되고 있다. 본 논문에서는 고온초전도 코일의 열적, 전기적 메카니즘을 분석하기 위한 FEM 모델을 제시하고, 이를 사용하여 �치 시 고온 초전도 코일의 안정성 향상 정도를 해석한다.

• Journal of Korean Electronics
• /
• v.4 no.1
• /
• pp.147-149
• /
• 1984

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.890-893
• /
• 2001

Two-layer self bonding insulating tape consists of butyl rubber(IIR ; Isobutylene-isoprene rubber) adhesive layer and polyethylene protective film. Butyl rubber have inherent characteristics such as resistance to corrosion and water, low temperature flexibility, excellent electrical insulating properties also resistance to environmental effect such as ozone and ultraviolet. Polyethylene film was used for the purpose of good insulating properties and resistance to ozone and ultraviolet. The tape was manufactured using extrusion and calender method.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1108-1111
• /
• 2019

This paper presents the comprehensive transformer design methodology with the winding method of automatic type suitable for LLC resonant converter. The problem with conventional LLC resonant transformer is that it is difficult to implement the winding method of automatic type because all windings are wound in one bobbin. Therefore, the LLC resonant transformer, which is capable of the winding method of automatic type to multiple section bobbin without insulation tape and barrier tape, is proposed in this paper and the design procedure of the proposed LLC resonant transformer is also shown. Modeling and analysis of the proposed LLC resonant transformer using Maxwell 3D simulation tool are described in detail and a protype 150W LLC resonant converter using the proposed LLC resonant transformer manufactured by 3D modelling is also verified through the experimental test.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1679-1681
• /
• 2004

Class-F and B resin-rich type insulating tapes are generally used for the ground wall insulations of respective air-cooled and water-cooled stator windings in larger turbine generators. In this paper, their electrical properties coupled with aging times in higher temperature than designed one in normal condition were experimentally investigated and the results of two comparative tests were presented on the existing class-F resin-rich type tape and a developed one after curing. The resin-rich tapes currently used arc composed of six and a half 3-layer sheets that arc structured with mica paper, the top and bottom supports of it respectively, and the epoxy resin to bind them tightly. The results for breakdown voltage and strength on the cured specimens were presented, which were composed of the unaged, the aged accelerated for one, two, and three thousand hours at 180 $^{\circ}C$. The surface and volume resistivities on them were measured and the results are also presented to make a comparative test for the initial electrical characteristics.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.15-19
• /
• 2013

This paper is to analyze and study the cause of fire examples produced because of short phenomenon by electric connecting damage and contacting engine over-heating with combustible materials in engine room of vehicle. In the first example, it knew the fact that the fire produced by contacting with body of vehicle because of loosed of bracket bolt for wire fixing that installed on the transmission case the battery power cable supply the power from battery of engine room to starting motor. In the second example, it certified the fire by short phenomenon because of insulation tape melting wound wiring lined from battery to starting motor. In the third example, it sought for fire's cause that melting phenomenon the wire coating by overheated engine as the wire disconnected with connector by the vibration. Therefore, the fire of system including engine electric made in the danger the people in the car by failure of engine and other system. And than, the car's driver must manage and examine a vehicle conscientiously.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1676-1678
• /
• 2004

Class-F resin-rich type insulating tapes are generally used for the groundwall insulations of the large turbine generators with air-cooled and hydrogen-cooled stator windings. In this paper, mechanical strength properties degraded over aging time in higher temperature than designed one in normal condition were experimentally investigated and the results of comparative tests were presented on the existing class-F resin-rich type tape and a developed one after curing. The resin-rich insulating tapes with composite material of Mica/Epoxy/support currently were used in this test. The tests for tensile and flexural strength properties were conducted with the specimens which were composed of unaged and the aged specimens accelerated for one, two, and three thousand hours at 180 $^{\circ}C$. The tensional strength was only measured for the unaged specimens and the results are also presented to make a comparative test for their initial mechanical characteristics.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.822-828
• /
• 2002

Fabrication and electrical characterization of R. F. High-power unit capacitors were investigated to study on condition of fabrication processing for R. F. High-power unit capacitor and electrical characteristics according to addition of $ZrO_2$. The unit capacitors were fabricated using tape casting. The optimum mixture ratio of dielectrics and mixing binder for the slurry fabrication was 57.5∼60.0: 42.5∼40.0 wt%. The slurry viscosity was 4000∼5000 cps and casting state of green tape fabricated using these slurry was excellent. Optimum stacking was made by 200 kg/$cm^2$ pressure with 80$^{\circ}C$ heating. $ZrO_2$ was added to improve the electrical characteristics of unit capacitor, especially breakdown characteristics. The dielectric constant and loss factor of the unit condenser having different $ZrO_2$ amounts was not changed in the addition range of 1 to 5 wt%. Also, dielectric constant was not changed in the frequency range of 10 to 500 kHz. It was found that characteristics of resistance voltage was improved through the formation of $CaZrO_3$ and the reduction of particle size as about 3wt% $ZrO_2$ was added.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.151-151
• /
• 1999

금속-산화막-반도체(MOS) 소자를 이용하는 집적회로의 발전은 게이트 금속의 규격 감소를 필요로 한다. 규격감소에 따른 저항 증가가 중요한 문제점으로 대두되었으며, 그동안 여러 연구자들에 의하여 금속 게이트에 관련된 연구가 진행되어 왔다. 특히 저항이 낮으며 녹는점이 매우 높은 내화성금속(refractory metal)인 텅스텐(tungsten, W)이 차세대 MOS 소자의 유력한 대체 게이트 금속으로 제안되었다. 텅스텐은 스퍼터링(sputtering)과 화학기상 증착(CVD) 방식을 이용하여 성장시킬 수 있다. 스퍼터링에 의한 텅스텐 증착은 산화막과의 접착성은 우수한 반면에 증착과정 동안에 게이트 산화막(SiO2)에 손상을 주어 게이트 산화막의 특성을 열화시킬 수 있다. 반면, 화학기상 증차에 의한 텅스텐 성장은 스퍼터링보다 증착막의 저항이 상대적으로 낮으나 산화막과의 접착성이 좋지 않은 문제를 해결하여야 한다. 본 연구에서는 감압 화학기상 증착(LPCVD)방식을 이용하여 텅스텐 게이트 금속을 100~150$\AA$ 두께의 게이트 산화막(SiO2 또는 N2O 질화막)위에 증착하여 물리 및 전기적 특성을 분석하였다. 물리적 분석을 위하여 XRD, SEM 및 저항등이 증착 조건에 따라서 측정되었으며, 텅스텐 게이트로 구성된 MOS 캐패시터를 제작하여 절연 파괴 강도, 전하 포획 메커니즘 등과 같은 전기적 특성 분석을 실시하였다. 특히 텅스텐의 접착성을 증착조건의 변화에 따라서 분석하였다. 텅스텐 박막의 SiO2와의 접착성은 스카치 테이프 테스트를 실시하여 조사되었고, 증착시의 기판의 온도에 민감하게 반응하는 것을 알 수 있었다. 또한, 40$0^{\circ}C$ 이상에서 안정한 것을 볼 수 있었다. 텅스텐 박막은 $\alpha$ 및 $\beta$-W 구조를 가질 수 있으나 본 연구에서 성장된 텅스텐은 $\alpha$-W 구조를 가지는 것을 XRD 측정으로 확인하였다. 성장된 텅스텐 박막의 저항은 구조에 따라서 변화되는 것으로 알려져 있다. 증착조건에 따른 저항의 변화는 SiH4 대 WF6의 가스비, 증착온도에 따라서 변화하였다. 특히 온도가 40$0^{\circ}C$ 이상, SiH4/WF6의 비가 0.2일 경우 텅스텐을 증착시킨 후에 열처리를 거치지 않은 경우에도 기존에 발표된 저항률인 10$\mu$$\Omega$.cm 대의 값을 얻을 수 있었다. 본 연구를 통하여 산화막과의 접착성 문제를 해결하고 낮은 저항을 얻을 수 있었으나, 텅스텐 박막의 성장과정에 의한 게이트 산화막의 열화는 심각학 문제를 야기하였다. 즉, LPCVD 과정에서 발생한 불소 또는 불소 화합물이 게이트의 산화막에 결함을 발생시킴을 확인하였다. 향후, 불소에 의한 게이트 산화막의 열화를 최소화시킬 수 있는 공정 조건의 최저고하 또는 대체게이트 산화막이 적용될 경우, 개발된 연구 결과를 산업체로 이전할 수 있는 가능성이 높을 것을 기대된다.