• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.58-65
• /
• 1998

Substituted dicyandiamide(Sub-DICY), Accelerated dicyandiamide(Acc-DICY), Trimellitic anhydride(TMA), Pyromellitic dianhydride(PMDA) and Phenolic curing agent(Ph.C.A.) are mainly used for epoxy powder coating curing agent. Various characteristics of epoxy films fully cured by optimum condition such as mechanical properties like $T_g$, tensile strength, elongation at break hardness, abrasion resistance and chemical properties like water absorption, acid resistance, alkali resistance and electrical properties, corrosion resistance are determined by various measuring devices and analyses devices. In conclusion, phenolic curing agent was shown excellent thoughness but severe color change as temperature increased. Acid anhydride has excellent insulation properties and color stability at elevated temperature but lower thoughness and adhesion to substrate. DICY curing agent was shown high water absorption and severe color chance as temperature increased.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.45-49
• /
• 2016

In the presence of poly(4-styrene sulfonate) (PSS) and excess amount of graphene oxide (GO), we conducted in-situ polymerization of 3,4-ethylenedioxythiophene (EDOT) without an oxidant. XPS and IR spectroscopies of the product (GO-P) showed that PEDOT/PSS was successfully synthesized by oxidative polymerization of EDOT and hybridized with GO. GO-P displayed a stable aqueous suspension, however, the high content (42%) of GO in GO-P diminished electrical conductivity down to $15S{\cdot}m^{-1}$. Annealing of GO-P films at $200^{\circ}C$ for 8 hr induced partial reduction of GO and finally enhanced electrical conductivity up to $212S{\cdot}m^{-1}$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.54-60
• /
• 2008

It is impossible to database(DB) the patterns of power cable events and cause analysis of faulted cable because the product liability(PL) law have been enforced in Korea, since 2002. In additions, simulation and pattern of power cable events are needed for DB system under accelerated deterioration. In this paper, we tested for resistance to cracking of cable below the 22.9[kV] class due to thermal stresses. This method of exam is following IEC 60811-3-1(Common test methods for insulating and sheathing materials of electric cables). From the results, The 22.9[kV] class A power cable was discolored on the surface and significantly reduced in the longitudinal direction. As the thermal weight properties of A power cable was definitely varied, we are able to guess the problem of manufacture. If the cable was defect by the manufacture, the victims would be able to claim for damage in the PL system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.6
• /
• pp.44-49
• /
• 2013

This study investigates the surface discharge characteristics of solid insulators by varying their materials, their shapes, and the dew-point of dry-air. The methodology of this study is that a quasi-uniform field is first applied to a test chamber. Then, the chamber is filled with dry-air as an insulation gas which pressure is varied from 1 to 6atm while applying an AC voltage to the chamber. The used solid insulators are teflon, polycarbonate, and bakelite. As the dew-point is lower and the pressure of dry-air is higher, the flashover voltage of all solid insulators increases more. When each characteristic of the solid insulators is compared under the same gas pressure, the flashover voltage of teflon is the highest. Then, the flashover voltage of polycarbonate is higher than that of bakelite. Moreover, it is observed that the flashover voltage increases as the diameter and the thickness of each solid insulator become larger and thicker, respectively. However, the thickness of the solid insulators is more critical for increasing the flashover voltage than their diameter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.386-386
• /
• 2010

최근의 전자재료들은 산화물 기반의 소자들을 이용하며 이들 소자의 특징은 가시광 영역에서의 높은 투과도와 실리콘 기반의 소자에 비해서 높은 이동도를 나타낸다. 이러한 점을 활용하여 LCD, PDP, 태양전지 등으로의 응용을 위해 활발히 연구되고 있다. 본 연구에서는 비정질임에도 이동도가 $10cm^2/V{\cdot}s$ 정도로 높은 이동도를 가지고 있는 a-IGZO 박막에 대하여 RF magnetron sputtering 법을 이용, 다각도의 연구를 진행하였다. 기판은 Corning 1737 유리기판을 사용하였으며 유기 클리닝 후 즉시 챔버 내부에 장착되었다. IGZO 타겟은 $In_2O_3$, $Ga_2O_3$, ZnO 분말을 각각 1:1:2mol% 조성비로 혼합하여 소결한 타겟을 사용하였으며 AFM, SEM, XRD 투과도를 이용하여 산소의 함량과 RF power에 따른 박막의 변화를 알아보았다. 박막 증착 조건으로는 초기 압력을 $2.0{\times}10^{-6}$ Torr, 증착압력으로 $2.0{\times}10^{-2}$ Torr를 유지하였으며, Ar 과 $O_2$의 비율을 10에서 40%까지 변화시키며 시편을 제작하였다. AFM 분석결과 $O_2$가 첨가될수록 박막의 거칠기가 감소하였으며, XRD 결과 Bragg's 법칙을 만족 하지 않는 비정질 구조임을 확인할 수 있었다. 가시광선 투과 특성은 $O_2$를 첨가한 박막이 첨가하지 않은 박막보다 우수하였으며 그 평균은 85% 이상으로 양호하였다. Hall과 XPS 분석결과 산소함량이 많아질수록 박막의 특성이 절연체의 특성을 가짐을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.729-730
• /
• 2007

선진국의 경우 송전용 애자의 내구성 향상을 위한 새로운 평가 기법을 적용하여 신뢰성을 향상시키는 등 연구가 활발하지만 국산 송전용 애자에 대한 열화요인 진단 및 대체기술은 거의 초기 연구 단계에 불과하다. 따라서, 국내 송전 선로 환경에 따른 송전용 애자의 구성 요소별 장기 열화요인 분석 기술의 부족을 극복할 필요가 있다. 모든 형태의 절연물은 사용 환경에 따라 열화에 따른 품질 저하는 피할 수 없다. 이에따라 초기 설계에서 최종적인 품질 확인 시험까지 적절한 불량 요인을 진단하여 개선 할 수 있는 제조공정과 경년품에 대한 정기적인 열화 시험 평가 등을 통해 송전용 자기애자의 신뢰성을 유지하는 것이 필요하다. 송전용 현수 애자의 수명과 신뢰성을 결정하는 요인은 복합적이며, 적정한 시료수와 통계적 접근 방법을 동원하여 분석하는 것이 최선이다 자기 애자의 수명에 영향을 주는 핵심 인자는 시멘트 및 자기부의 강도 저하로 알려져 있다. 기본적인 단품 성능시험을 실시한 결과, 냉열 및 급준파 특성에 대한 내구성이 문제점으로 도출되었다. 물론 특정 경년품(1989년도 제품)에서 집중적으로 불량이 발생한 것이지만, 이것은 일반적으로 문제가 있는 자기 애자에서 발생하는 전형적인 형태이다. 현재 가장 문제가 되는 것은 급준파 및 내아크 시험과 같이 열적, 기계적 충격에 대한 내구성을 확인하는 열화 평가방법이 요구된다. 본 연구에서는 경년품 및 신품에 대한 냉열 가속, 경년 가속 열화시험 및 급준파 열화시험과 현수 애자의 핵심 소재인 자기의 HRB 경도 특성 시험하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.98-103
• /
• 2013

In this work, we investigated the enhanced performance of IZO-based TFTs with $HfSiO_x$ gate insulators. Four types of $HfSiO_x$ gate insulators using different diposition powers were deposited by co-sputtering $HfO_2$ and Si target. To simplify the processing sequences, all of the layers composing of TFTs were deposited by rf-magnetron sputtering method using patterned shadow-masks without any intentional heating of substrate and subsequent thermal annealing. The four different $HfSiO_x$ structural properties were investigated x-ray diffraction(XRD), atomic force microscopy(AFM) and also analyzed the electrical characteristics. There were some noticeable differences depending on the composition of the $HfO_2$ and Si combination. The TFT based on $HfSiO_x$ gate insulator with $HfO_2$(100W)-Si(100W) showed the best results with a field effect mobility of 2.0[$cm^2/V{\cdot}s$], a threshold voltage of -0.5[V], an on/off ratio of 5.89E+05 and RMS of 0.26[nm]. This show that the composition of the $HfO_2$ and Si is an important factor in an $HfSiO_x$ insulator. In addition, the effective bonding of $HfO_2$ and Si reduced the defects in the insulator bulk and also improved the interface quality between the channel and the gate insulator.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.570-578
• /
• 2002

Cathodic protection is widely used to prevent corrosion of steel materials buried in the underground and sea. As a rectifier for cathodic protection, the conventional phase-controlled rectifiers have been used so far in spite of such shortcomings as large volume, heavy weight and floor power factor. In order to overcome such disadvantages, this paper proposes a new module-type switching rectifier for cathodic protection, which is composed of two parts, namely, AC/DC converter and module- type DC/DC converter. The AC/DC converter is a single-phase IGBT PWM rectifier, thus resulting in almost unity power factor and controlled DC output voltage. The module-type DC/DC converter operates under ZVS/ZCS switching condition to permit high frequency switching operation. It enables to use high-frequency transformer for electrical isolation, thus reducing volume and weight of overall system and improving system efficiency. It should be anticipated that the proposed rectifier techniques apply to the similar technical areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.6980-6985
• /
• 2014

A micro-conductive pattern was fabricated on an insulating substrate ($SiO_2$) surface using a laser direct writing method. In the LIFT process, when the laser beam irradiates a thin metal film, the photon energy is absorbed by the film and converted to thermal energy, and the thermal decomposition reaction produced by the resulting heat conduction forms a deposit on the substrate. The resistivity of the micro-electrodes deposited through LIFT process with and without polymer coating was measured. The results showed that the electric conductivity of the micro-pattern and micro-structure can be increased approximatly two times when the deposited micropattern is fabricated through a LIFT process with a polymer coating, compared to the case without a polymer coating.

• Economic and Environmental Geology
• /
• v.44 no.5
• /
• pp.451-462
• /
• 2011

Asbestos or its applications have been used for long times and for various purposes in our life because of their merits, namely fire resistance, electric insulation and chemical resistance capacity etc. Despite of theses many merits, one of the problems of asbestos is shown toxicity according to its fiber type. So we need data to solve about this problem. In this paper, we study on the technical method of asbestos waste treatment and on the trends of asbestos researches and developments by the analysis of its patents and DWPI database materials. As a result, the asbestos-waste treatment data in the its related patents is used 267 cases to analyze. These data are divided into 86(32.5%) cases of solid waste disposal(B09B). 41(16.6%) cases of separation(B01D) and 27(10.2%) of lime, magnesia, slag, cement and their composites(C04B).